Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
  2. Shop
    3. Page 17

Showing 145–153 of 260 results

Filters

  • Truth Encore Operators Handle And Cover – Left Hand

    Designed as an integrated system, Encore operators and locks provide unmatched elegance and performance. With a time-proven design, Encore products stand out in beauty while enhancing the window’s overall appearance. Differentiate your window line by taking advantage of Encore’s unique cover and handle designs. Encore’s full-flip folding handle recesses in the operator cover–giving windows a smooth, contemporary look–and eliminating interference with curtains and blinds. The snap-fit cover removes easily for painting and staining of window frame.

    • Color/Finish: Clay.
    • Cover Material: Plastic.
    • Handle Material: Die Cast Metal.
    • Configuration: Left Hand.
    Green checkmark of qualityEvery item checked for quality
    $20.31 $11.17

  • NIBCO 4 in. x 2 in. PVC DWV Spigot x Hub Flush Bushing

    The NIBCO 4 in. x 2 in. PVC DWV Spigot x Hub Flush Bushing can be inserted into a PVC sitting hub to reduce the hub to a smaller pipe size. The bushing is designed for use with drain, waste and vent piping systems. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

    Green checkmark of qualityEvery item checked for quality
    $7.67 $4.22

  • WIEGMANN Outdoor Enclosure 6 in. x 6 in. x 4 in. NEMA 3R Screw Cover/Pull Box

    WIEGMANN 6 In. x 6 In. x 4 In. rain-proof screw cover box is made of pre-galvanized steel and a gray polyester powder inside and out. It is designed for indoor or outdoor locations. The screw cover box features a drip shield top and smooth seamless sides, front, and back, knockouts are standard in the bottom, no gasket is required, hasp for padlocking and provisions for meter seal are provided. A slip on reversible, removable cover is securely fastened with screws located along the bottom edge and ideal for surface mounting.
    • Model #RSC060604RC.
    • Designed for use as wiring boxes and junction boxes.
    • Provide protection in outdoor applications against rain, sleet, and snow, or indoors against dripping water.
    • ANSI-61 gray polyester powder inside and out.
    • Drip shield top and smooth seamless sides and front.
    • Mounting holes provided on back of enclosure.
    • Hasp for padlocking or meter seal is provided.
    Green checkmark of qualityEvery item checked for quality
    $44.27 $24.35

  • Frost King E/O 3/8 in. Dia Contractor Pack Caulk Backer Rod

    The Thermwell Products 3/8 in. Dia Caulk Saver Contractor Pack helps insulate and cushion while reducing the amount of caulk needed to fill or seal large openings. Use to back fill large gaps before applying caulk (caulk sold separately). Helps insulate and cushion while reducing the amount of caulk needed to fill or seal large openings.

    Green checkmark of qualityEvery item checked for quality
    $31.27 $17.20

  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (3/8 in. O.D.) w/Safety+Plus2 Thermal Excess Flow Valve (33,400 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. I.D. (3/8 in. O.D.).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • The Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • Charlotte Pipe 4 in. x 4 in. x 1-1/2 in. PVC DWV Wye Reducing

    PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140F. PVC is lightweight and easy to install. They require no special tools for cutting and can be installed with solvent cementing, threading, flanging and roll-grooved joining.

    Green checkmark of qualityEvery item checked for quality
    $38.82 $21.35

  • HOME-FLEX 1/2 in. CSST x 1/2 in. FIPT Brass Female Adapter

    The HOME-FLEX Female Adapter allows you to quickly affix a CSST system to a gas source. Used to attach CSST directly to Steel Pipe. Can attach CSST either the beginning or end of a CSST system.

    • Very high quality brass construction.
    • 1/2 in. diameter.
    • For use with HOME-FLEX CSST systems.
    • For use with natural gas or liquid propane.
    • CSA and IAPMO certified.
    • Not for use with Home Flex UNDERGROUND poly tubing.
    • HOME-FLEX Corrugated Stainless Steel Tubing (CSST) flexible gas piping material must be installed by a qualified installer who has been certified in the use of the HOME-FLEX gas piping system.
    • Some areas of the United States do not allow installation of CSST for fuel gas piping systems. It is the installer’s responsibility to check and understand all codes governing the location of installation prior to installing HOME-FLEX CSST.
    • CSST is generally for indoor use; however, it can be used outdoors and/or underground with very specific parameters.
    Green checkmark of qualityEvery item checked for quality
    $10.13 $5.57

  • 1/2 in. PVC Male Adapter

    PVC non-metallic fittings can be used with Sch. 40 and Sch. 80 RIGID non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. Fittings insure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are nonconductive assuring a safe system. Resistant to sunlight and listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode.

    • Can be used to join RIGID non-metallic conduit (RNC).
    • Compatible with Sch. 40 and Sch. 80 RIGID non-metallic conduit (RNC).
    • For use in aboveground and underground applications as well as exposed outdoor usage.
    • Durable PVC construction means no rusting or corroding.
    • Weighing less than metallic systems means more efficient and quicker installation time.
    • UL listed.
    Green checkmark of qualityEvery item checked for quality
    $0.55 $0.30

  • Hampton Bay 4 ft. 2400-Watt White Linear Track Lighting Rail Section

    The Hampton Bay 4 ft. linear track lighting section is compatible with all Hampton Bay, commercial electric, EC/H series track heads, pendants and components. The 120-Volt track is rated for up to 2,400-Watt and features a 3 bus system. Multiple tracks can be connected together using various couplers (sold separately). The track is cuttable for a customized length. Comes with screws or toggle bolts for solid surface or drop ceiling installations. Versatile and attractive, get creative and design fixtures that will illuminate hard to reach areas. Power feed required (sold separately).

    • Durable metal construction is built to last and offers a clean, refined look.
    • 120-Volt power rating of up to 2,400-Watt.
    • 100 % compatible with all 120-Volt Hampton Bay, commercial electric EC/H series, 3 bus linear track systems, components and accessories.
    • For residential and commercial lighting applications.
    • Can be surface mounted or drop ceiling mounted (hardware included).
    • Ceiling or wall mountable.
    • Easy to follow instructions.
    Green checkmark of qualityEvery item checked for quality
    $16.96 $9.33
X