Showing 154–162 of 260 results
-
HALO 4 in. 3000K White Integrated LED Recessed Ceiling Light Retrofit Trim Deep Baffle for Low Glare Title 20 Compliant
$27.47 $15.11Halo RL4 Deep Baffle Series consists of a deep regressed baffle retrofit LED Module-Trim for 4 in. aperture recessed housings. The RL4 Deep Baffle Series is designed for use with compatible 4 in. housings: Halo, All-Pro and others. RL4 Deep Baffle Modules produce soft white light and features a deeper regressed baffle for better glare control. For further value the RL4 lens provides uniform illumination and wet location listing. The RL4 die-cast construction makes any housing AIR-TITE, for added HVAC savings and code compliance.
- Title 20 compliant, can be shipped to California locations.
- ENERGY STAR qualified for energy conservation and savings up to $583 savings over the life of the fixture.
- Includes black and white baffle attachments, extra regression for better glare control.
- Fixture is built to last with maintenance-free energy efficient LEDs with 70,000-hours of life (equivalent to 32-year of life at 6-hours per day or 64-year at 3-hours per day), eliminating your need to use and replace bulbs.
- White baffle provides good brightness at 681 Lumens to provide illumination to any room, great for 8 ft. to 10 ft. ceilings.
- Compatible with most 4 in. housings but are best with Halo H995, E4, H99 and H245 series models.
- 90 CRI title 24 compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
- Wet rated, can be used in shower and outdoor light applications.
- Produces light equivalent to a 65-Watt bulb yet uses just 8.5-Watt.
- Designed for continuous dimming down to 5%, standard 120-Volt electronic low-voltage dimmer is recommended for best performance.
- E26 Edison screw base adapter for retrofit into existing incandescent bulb 4 in. housings.
- Mountable using friction blades (included).
- Rated for use with IC and non-IC rated housings.
- 3000K soft white color temperature provides a friendly and inviting atmosphere, works well throughout the house especially in living rooms, bathrooms, hallways and bedrooms.
Every item checked for quality -
1-1/2 in. 90-Degree Electric Metallic Tube (EMT) Elbow
$12.27 $6.75The corrosion-resistant 1-1/2 in. EMT 90 degree Elbow changes conduit direction while still allowing for easy wire pulling, thanks to its large radius. Usable indoors or outdoors. This elbow meets UL and CSA requirements.
- Enables a 90 degree change of direction in a run of EMT conduit.
- Made of galvanized steel for corrosion resistance.
- UL and CSA Listed.
- Large radius allows for easy wire pulling.
Every item checked for quality -
2 in. Rigid Metal Conduit (RMC) Water Tight Conduit Hub
$21.40 $11.77Topaz’s Water Tight Conduit Hub with Insulated Throats are used to secure or terminate threaded conduit to an unthreaded opening in a box or metal enclosure where a rain-tight, oil-tight or dust-tight connection is required. Insulated throat insulates conductors, prevents abrasion and thinning of conductor insulation, and reduces wire pull effort. Oversized locknut protects against damage from vibrations and promotes positive grounding. The threaded portion of the hub positions into a knockout and is locked in place with a locknut. Once in place, conduit can be threaded onto the hub. Hubs form a watertight seal, making them ideal for indoor and outdoor applications, including service entrance applications. All malleable construction ensures mechanical protection. Zinc-electroplated for added corrosion protection.
- Sold as: Single unit.
- Trade Size: 2 in.
- Insulated throat.
- Recessed neoprene O-ring assures rain-tight, oil-tight, or dust-tight connections.
- Assembled with 150° rated insulator.
- Oversized locknut provides vibration-proof.
- Wet or Dry Locations.
- Primary Material: Zinc Die Cast.
Every item checked for quality -
Orbit 1 in. FNPT Automatic Inline Angle Valve with Flow Control
$16.96 $9.33This Orbit 1 in. PVC FPT Automatic Inline Angle Valve with Flow Control features a slow closure speed that helps reduce water hammer and system wear. The valve operates at flow rates from 0.5 – 40 GPM.
- Use to replace or upgrade your existing sprinkler valves.
- Inlets on the bottom and the side allow easy installation.
- Operates at flow rates from 0.5 – 40 GPM.
- Operates between 15 – 125 psi.
- PVC construction is UV resistant.
- Stainless-steel spring.
- Flow control enables you to increase or decrease the flow of water through the valve to meet your watering needs.
- Wire rod design is self cleaning.
- Manual external bleed.
- Manual on/off lever.
- Slow closure speed helps reduce water hammer and system wear.
- Heavy-duty diaphragm for durability.
Every item checked for quality -
Apollo 3/4 In. X 3/4 In. Pvc Schedule 40 Slip X Slip Ball Valve Pro Pack (12-Pack)
$18.18 $10.00PVC Sch. 40 Ball Valves are compact and lightweight. This Slip x Slip valve is designed for a variety of applications including pressure distribution of cold water in irrigation, pool, spa, agricultural, commercial and light industrial applications and comes in a plastic jar of 12 valves which is convenient, resealable, and reusable. The ball valves are NSF approved and have EPDM seats and O-rings integrated into the durable PVC body.
- PVC schedule 40 construction for durability.
- Full port design allows for maximum efficiency and minimal turbulence or pressure reduction.
- Quarter-turn flow control for easy on and off.
- NSF / ANSI standard 372 certified.
- Slip connections conform to ASTM D2467.
- Working temperature range: 41°F to 122°F (5°C to 55°C).
- Maximum pressure rating 150 psi at 73°F (22°C).
- Requires solvent cement for installation (not included).
- Please note – as temperature increases, working pressure decreases, the optimal working pressure for PVC valves is 150 psi at 73°F (22°C) if the temperature increases above 73°F (22°C), use the PVC. correction factor to determine working pressure, multiply the maximum working pressure by the correction factor, please see correction factor grid on the attached specification sheet.
Every item checked for quality -
ROPPE Self-Stick Black 4 in. x 20 ft. x 0.080 in. Vinyl Wall Cove Base Coil
$25.71 $14.14Low cost and good looks highlights Roppe’s Type TV thermoplastic Vinyl base. It’s extremely durable without sacrificing attractiveness, and very economical because it’s made from PVC Vinyl. With its moderate pricing and beautiful color palette, our Vinyl wall base is an outstanding selection four any installation.
- Withstands scratches/scuffs from daily wear.
- Superior durability for indoor commercial or residential use.
- Uniform height helps conceal floor and wall irregularities.
- Ribbed back for easy adhesion.
- Co-extruded top layer resists scuffs and scratches.
- Black in color.
- 20 ft. coil.
Every item checked for quality -
Hampton Bay Cairo Low Voltage Square Transitional Black Integrated LED Outdoor Landscape Path Light With Bubble Glass (1-Pack)
$34.96 $19.23Bubble glass with die-casts construction suitable for outdoor using. A diffused glow onto paths, walkways, low-lying ground cover or around a deck. A stake is included for easy insertion into the ground and the rugged metal construction with black finish is corrosion resistant to withstand outdoor environs.
- Includes 1-path light with integrated led module, stake and fixture wire with clip connector.
- High luminous efficiency with bubble glass.
- Rugged metal construction with black finish is ideal for outdoor installation.
- Stake design installs easily into the ground to illuminate paths, walkways and low-lying ground cover.
- Transformer and wire are required for use of this product- sold separately.
Every item checked for quality -
American Metal Products 4 in. x 7 ft. Standard Oval 45-Degree Elbow
$26.20 $14.41Designed for use with 4 in. steel pipe, this 4 in. x 7 ft. Standard Oval 45° Elbow helps you create an effective heating, ventilation and air conditioning (HVAC) system. Its 1-piece body offers easy installation. Pioneer in the development and simplification of effective venting products. Amerivent components are crafted for today’s building and appliance requirements.
- Galvanized steel.
- For use in an HVAC system.
- Oval shape.
- 45° elbow.
- Compatible with 4 in. steel pipe.
- 1-piece construction.
Every item checked for quality
