Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
  2. Shop
    3. Page 19

Showing 163–171 of 260 results

Filters

  • Home Decorators Collection 1.5 in. W x 2 in. H Titanium Cube Decorative Shelf Bracket

    The Titanium Cube Decorative Shelf Brackets (2-Pack) are adjustable to fit thicknesses of up to 1/2 in. The brackets feature steel construction with a titanium finish. The Cube bracket, when properly installed, will support up to 22 lbs. per pair.

    • Titanium finish.
    • Steel construction.
    • Use to support decorative wall shelving (sold separately).
    • Supports up to 22 lbs. per pair when properly installed.
    • Adjustable to fit shelf thicknesses of up to 1/2 in.
    Green checkmark of qualityEvery item checked for quality
    $13.98 $7.69

  • ClosetMaid SuperSlide 6.3 mm. Preloaded Back Wall Clips (48-Pack)

    The ClosetMaid Preloaded Back Wall Clips (48-Pack) help you anchor wire shelving to a drywall. Constructed from strong plastic, these clips install easily with the included push pins. Install easily with push pins (included).

    • For use as part of the ClosetMaid fixed mount system.
    • Should be spaced no further than 12 in. apart.
    • Made of strong plastic.
    • Install easily with push pins (included).
    Green checkmark of qualityEvery item checked for quality
    $14.47 $7.96

  • KODO 120-Watt Equivalent PAR38 LED Motion Sensor Flood Light Bulb Bright White (2-Pack)

    The KODO LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 35 ft. range and keeps lights on for 5 minutes after the last detected movement. The sensor detection angle is 100°. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.

    • Radar motion sensor up to 35 ft. turns on lights for 5-minutes.
    • 100° detection angle.
    • Daylight sensor keeps daytime motion from triggering the lights.
    • Easily deactivate sensors to allow for constant 24/7 bulb operation.
    • Switch lights ON for normal motion sensor mode.
    • Switch OFF, then back ON (within 3-seconds) for always-on, 24/7 operation.
    • Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
    • 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
    • 1200 Lumens each bulb.
    • Not for use with existing motion sensor fixtures.
    • Light appearance: 3,000K (bright white).
    Green checkmark of qualityEvery item checked for quality
    $19.87 $10.93

  • BELL N3R RAYNTITE Aluminum Gray 2-Gang Weatherproof Electrical Outlet Cover for GFCI Outlet and Toggle Switch, Flip Lid

    Bell RAYNTITE device covers designed to provide weatherproof protection for an outdoor receptacle. RAYNTITE covers are self-closing. Padlockable and mounts to a box or device.

    • Model # 5043-0.
    • Rugged die-cast aluminum construction.
    • State-of-the-art powder coat finish provides maximum weatherability and scratch resistance.
    • Installation hardware, gasket and multilingual instructions included.
    • Toggle and GFCI.
    • Vertical mount.
    • NEMA 3R rated.
    Green checkmark of qualityEvery item checked for quality
    $14.98 $8.24

  • Lithonia Lighting Contractor Select LQM Series 120/277-Volt Integrated LED White and Red Exit Sign W/Back Up Battery

    The Lithonia Lighting Quantum Thermoplastic LED Emergency Exit Sign features an engineering-grade thermoplastic housing that is impact resistant, scratch resistant and corrosion proof. This exit sign uses LED light bulbs and has a nickel-cadmium battery. Innovative snap-together design allows installation in less than 3-minutes.

    • 180 Lumens.
    • White sign with red lettering.
    • Thermoplastic housing.
    • Meets UL 924 requirements.
    • Uses two 1-Watt LED light strips (included).
    • Nickel-cadmium backup battery.
    Green checkmark of qualityEvery item checked for quality
    $79.96 $43.98

  • WIEGMANN Outdoor Enclosure 8 in. x 8 in. x 4 in. NEMA 3R Screw Cover/Pull Box

    WIEGMANN 8 In. x 8 In. x 4 In. rain-proof screw cover box is made of pre-galvanized steel and a gray polyester powder inside and out. It is designed for indoor or outdoor locations. The screw cover box features a drip shield top and smooth seamless sides, front, and back, knockouts are standard in the bottom, no gasket is required, hasp for padlocking and provisions for meter seal are provided. A slip on reversible, removable cover is securely fastened with screws located along the bottom edge and ideal for surface mounting.
    • Model #RSC080804RC.
    • Designed for use as wiring boxes and junction boxes.
    • Provide protection in outdoor applications against rain, sleet, and snow, or indoors against dripping water.
    • ANSI-61 gray polyester powder inside and out.
    • Drip shield top and smooth seamless sides and front.
    • Mounting holes provided on back of enclosure.
    • Hasp for padlocking or meter seal is provided.
    Green checkmark of qualityEvery item checked for quality
    $59.98 $32.99

  • HDX 600 Lumens Integrated LED Clamplight

    This 600 Lumens Integrated LED Clamplight presents a unique ultra-thin design that is compact and convenient to use in different sites, such as the garage or workroom. Supplying with the separate magnetic metal base to have 4-in-1 function which makes it to be a hanging lamp, hand-Held work lamp, table lamp or magnetic lamp freely according to different demands. This light is built with the LED integrated, ensuring long-lasting and energy-efficient illumination.

    • High power SMD LED with 600 Lumens light output.
    • Ultra-thin panel for saving freight, store shelves and storage places.
    • With metal base, 4-in-1 function: hanging lamp, hand-held work lamp, table lamp and magnetic lamp.
    • Ball joint for easy positioning.
    • SPT-2-8/2 in. 5 ft. cord.
    • Energy saving durable on/off power switch.
    • Full metal clamp with scratch-resistant vinyl sleeve.
    • Frosted lens decreases glare and provides softer and even light distribution for user-friendly.
    • Heavy duty structure.
    Green checkmark of qualityEvery item checked for quality
    $19.98 $10.99

  • EcoSmart 65-Watt Equivalent BR30 Dimmable CEC LED Light Bulb Daylight (6-Pack)

    The BR30 LED Daylight is an indoor flood light bulb with a perfect BR30 shape to fit your indoor recessed cans or track light fixtures. Use this bulb in locations such as kitchens, living rooms or home offices. It is a perfect replacement of your traditional incandescent, CFL or halogen lamps. It only uses 9-Watt and can last up to 10 years based on a 3-hour a day usage schedule. The daylight color creates an invigorating and stimulating environment that is similar to natural daylight.

    • Brightness: 695 Lumens.
    • Estimated yearly energy cost: $1.08 (based on 3-hours/day, 11/kWh, costs depend on rates and use).
    • Life: 10-year (based on 3-hours/day).
    • Light appearance: 5,000K (day light).
    • Energy used: 9-Watt (equivalent to a 65W standard incandescent light bulb).
    • Lumens per watt: 76.
    • Uses 86% less energy compared to a standard incandescent light bulb.
    • Ideal for use in recessed cans and track light fixtures.
    • Fully dimmable with a shadow-free experience, damp locations rated.
    • Contains mercury: no.
    • California Energy Commission Title 20 Compliant LED Light Bulb.
    Green checkmark of qualityEvery item checked for quality
    $18.96 $10.43

  • BrassCraft 1/2 in. Nominal Push Connect x 1/2 in. FIP x 20 in. SpeediOne Braided Faucet Connector and 1/4-Turn Straight Valve

    Original Retail Price: $17.75.

    BrassCraft’s push connect one-piece water supply combines their trusted brass water valve with their flexible braided polymer connector for one quick easy-to-install solution. BrassCraft’s one-piece connection features push connect technology on the valve inlet and a hand-tighten wing nut on the outlet to provide a significant savings in installation time and cost. Push connect valve inlet requires no special tools to install and comes equipped with a pre-inserted tube stiffener to make the product ideal for copper, PEX and CPVC piping systems. The braided polymer fibers of the connector are designed to bend freely without kinking or crimping in tight quarters and resist corrosion caused by chemicals found in common household, tile and glass cleaners. In addition, its reinforced inner hose resists corrosion under harsh water conditions.

    • 1-piece unit combines valve and supply line.
    • Saves time with one less connection.
    • No special installation tools required.
    • Installation ready with pre-inserted tube stiffener.
    • Fast, reliable and secure.
    • Compatible with copper, PEX and CPVC.
    • Remove with combination removal tool or 5/8 in. open end wrench.
    • Connector bends freely without kinking or crimping in tight quarters.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $3.64 $2.00
X