Showing 163–171 of 260 results
-
ROPPE Vinyl Self Stick Snow 4 in. x 0.080 in. x 20 ft. Wall Cove Base Coil
$25.71 $14.14Low cost and good looks highlights ROPPE’s Type TV thermoplastic Vinyl base. It’s extremely durable without sacrificing attractiveness, and very economical because it’s made from PVC Vinyl. With its moderate pricing and beautiful color palette, our Vinyl wall base is an outstanding selection 4 any installation.
- Withstands scratches/scuffs from daily wear.
- Superior durability for indoor commercial or residential use.
- Uniform height helps conceal floor and wall irregularities.
- Ribbed back for easy adhesion.
- Homogeneous color is inherent through the base and superior finish resists scuffing gouging and most chemicals.
- Intended for commercial or residential use.
- 20 ft. coil.
- Snow in color.
Every item checked for quality -
#26, BrassCraft 1/2 in. Compression Inlet x 3/8 in. Compression Outlet Straight Valve
$5.45 $3.00
BrassCraft 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet 1/4 in. Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.
- Compatible with copper or PEX (PEX installations require a stainless steel tube insert).
- Smooth, quarter-turn operation, ON/OFF flow control with a 90° turn of the handle.
- 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
- Easy-to-remove handle protects against accidental operation during rough-ins.
- 1-piece body construction for strength, durability and long-lasting performance.
- Chrome-plated brass.
- Temperature rating: 40°F to 160°F.
- Pressure rating: 125 psi maximum.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector (1/2 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (85,000 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)
$27.27 $15.00BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. ID (3/8 in. OD).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
48 in. W x 22 in. D x 36.2 in. H Bath Vanity in Navy Blue with Marble Vanity Top in White with White Basin
$1054.55 $580.00Decorate your bathroom with this Contemporary Bathroom Vanity Set, this vanity offers generous storage space while maintaining a minimalistic look. Incorporate a classic vanity in your bathroom with a modern twist. 48 in. vanity with double basins which will be your best choice.
- Model # 69048D-CAB-DB-SQ.
- Vanity was crafted from solid oak wood with plywood, navy blue color paint finished. It is arranged with 5-functional drawers and 4-doors which offer usable effortless storage.
- Italian Carrara white marble countertop, top with 1 in. thickness for beveled edge. This top includes backsplash, 1-undermount porcelain sink (CUPC certified), 3-pre-drilled holes for widespread faucets.
- Hinges and sliders are concealed with soft-close function, ideal for your bathroom as it prevents any slamming noises.
- Golden brushed nickel knobs and handles.
- Included: cabinet, top, basin, backsplash and hardware.
- Not included: faucet and mirror.
- Arranged with 4-functional drawers and 4-doors which offered usable effortless storage.
- Factory assembled base cabinet of the vanity has an easy installation.
Every item checked for quality -
Juno 75-Watt Flared Steps Satin Chrome Track Lighting Head
$26.29 $14.46The Juno Trac-Lites Flared-Step Track Light offers a contemporary shape. It provides exceptional task and accent lighting when installed on the economical Juno Trac-Lites system. The perfect blend of form, function and value, this fixture features a durable, drawn-steel housing with a high-quality satin chrome finish.
- Bulb NOT Included.
- Drawn-steel track light housing with satin chrome finish is durable and attractive.
- 90° vertical aiming capability and 358° rotation permit light-beam adjustment for virtually any task or accent lighting application.
- Spring-loaded locking latch on mounting adapter provides secure attachment of fixture to track.
- Patented, embossed polarity arrow on bottom of mounting adapter assures proper electrical connection.
Every item checked for quality -
2 in. Bolt-On Hub for Electrical Panels/Load Centers with B Openings
$20.47 $11.26Bolt-On Hub, along with its elongated mounting holes, reduces the need for costly conduit offsets and bends while allowing for easy and quick adjustments. The Square D by Schneider Electric 2 in. Hub is for use in Square D load centers, CSED devices and safety switches. This hub is a Type B size and is UL and CSA safety listed.
- For use in Square D load centers, CSED devices and safety switches.
- Can be used for outdoor load centers and safety switches.
- UL and CSA listed.
- Type B size.
- ANSI certified.
Every item checked for quality -
Good Vibrations Weight Absorbing Trimmer Strap (Bungee)
$19.96 $10.98Good Vibrations Zero-Gravity Trimmer Shoulder Strap uses Bungee Pro-X technology to absorb the weight of the Trimmer, and relieves the tension in your shoulders, back and arms. It is ideal for all string trimmers, gas or electric, commercial or household use. Quick connect features attaches to trimmer in seconds.
Every item checked for quality -
1-1/4″ PVC Terminal Adapter
$1.67 $0.92TA25 Scepter rigid PVC conduit pipe and fittings are non-sparking and non-conducting, thereby eliminating the most dangerous second point of contact and phase to ground faults. The use of a separate grounding conductor in a Scepter PVC conduit system gives a complete and positive ground for the whole system.
Every item checked for quality
