Showing 163–171 of 260 results
-
Satin Nickel Door Hinge – 3 1/2 in. x 3 1/2 in. – 5/8 in. Radius
$3.91 $2.15- Manufacturer: Doormerica Hardware.
- Style: Full Mortise, Plain Bearing, Residential Non-Template Hinge.
- Material: Steel.
- Color/Finish: Satin Nickel.
- Type: Butt hinge – 5/8 in. radius.
- Size: 3-1/2″ x 3-1/2″.
- Width: 3-1/2″.
- Does Not Include Wood Mounting Hardware.
Every item checked for quality -
RACO 1/2 in. Uninsulated Liquid-Tight Connector, 1-Pack
$3.31 $1.82Suitable for indoor or outdoor locations to connect flexible metallic liquidtight conduit or Type B flexible non-metallic conduit to a box or enclosure. Features our split-gland ring that ensures a liquidtight seal. Zinc electroplated for corrosion resistance.
- Steel and malleable iron construction provides raceway integrity.
- Sealing washer provides a liquidtight seal when terminating the connector in a threadless opening.
- Locknut provided.
- Suitable for use in class 1, div 2, class 2, div 1 and 2, class 3, div 1 and 2 hazardous locations.
Every item checked for quality -
2 in. Bolt-On Hub for Electrical Panels/Load Centers with B Openings
$20.47 $11.26Bolt-On Hub, along with its elongated mounting holes, reduces the need for costly conduit offsets and bends while allowing for easy and quick adjustments. The Square D by Schneider Electric 2 in. Hub is for use in Square D load centers, CSED devices and safety switches. This hub is a Type B size and is UL and CSA safety listed.
- For use in Square D load centers, CSED devices and safety switches.
- Can be used for outdoor load centers and safety switches.
- UL and CSA listed.
- Type B size.
- ANSI certified.
Every item checked for quality -
WIEGMANN Indoor Enclosure 6 in. x 6 in. x 4 in. NEMA 1 Screw Cover/Pull Box
$25.98 $14.29WIEGMANN 6 in. x 6 in. x 4 in. screw cover pull box is made of pre-galvanized steel and designed for indoor locations. The product is ideal for surface mounting or allows runs of conduit for power or communication conductors. Boxes have flat, removable covers fastened with screws. Holes are provided in back for mounting. NEMA 1 enclosures are intended for indoor use, primarily to provide a degree of protection against contact with the enclosed equipment in locations where unusual service conditions do not exist. The enclosures shall meet the rod entry and resistance tests.- Model #SC060604RC.
- Designed for use as wiring boxes and junction boxes.
- Provide a degree of protection against contact with the enclosed equipment.
- ANSI-61 gray polyester powder inside and out.
- Removable concentric knockouts on all four sides.
- Mounting holes provided on back of enclosure.
- Cover easily removed without extracting cover screws.
Every item checked for quality -
HALO 4 in. 3000K White Integrated LED Recessed Ceiling Light Retrofit Trim Deep Baffle for Low Glare Title 20 Compliant
$27.47 $15.11Halo RL4 Deep Baffle Series consists of a deep regressed baffle retrofit LED Module-Trim for 4 in. aperture recessed housings. The RL4 Deep Baffle Series is designed for use with compatible 4 in. housings: Halo, All-Pro and others. RL4 Deep Baffle Modules produce soft white light and features a deeper regressed baffle for better glare control. For further value the RL4 lens provides uniform illumination and wet location listing. The RL4 die-cast construction makes any housing AIR-TITE, for added HVAC savings and code compliance.
- Title 20 compliant, can be shipped to California locations.
- ENERGY STAR qualified for energy conservation and savings up to $583 savings over the life of the fixture.
- Includes black and white baffle attachments, extra regression for better glare control.
- Fixture is built to last with maintenance-free energy efficient LEDs with 70,000-hours of life (equivalent to 32-year of life at 6-hours per day or 64-year at 3-hours per day), eliminating your need to use and replace bulbs.
- White baffle provides good brightness at 681 Lumens to provide illumination to any room, great for 8 ft. to 10 ft. ceilings.
- Compatible with most 4 in. housings but are best with Halo H995, E4, H99 and H245 series models.
- 90 CRI title 24 compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
- Wet rated, can be used in shower and outdoor light applications.
- Produces light equivalent to a 65-Watt bulb yet uses just 8.5-Watt.
- Designed for continuous dimming down to 5%, standard 120-Volt electronic low-voltage dimmer is recommended for best performance.
- E26 Edison screw base adapter for retrofit into existing incandescent bulb 4 in. housings.
- Mountable using friction blades (included).
- Rated for use with IC and non-IC rated housings.
- 3000K soft white color temperature provides a friendly and inviting atmosphere, works well throughout the house especially in living rooms, bathrooms, hallways and bedrooms.
Every item checked for quality -
NIBCO 4 in. x 2 in. PVC DWV Spigot x Hub Flush Bushing
$7.67 $4.22The NIBCO 4 in. x 2 in. PVC DWV Spigot x Hub Flush Bushing can be inserted into a PVC sitting hub to reduce the hub to a smaller pipe size. The bushing is designed for use with drain, waste and vent piping systems. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.
Every item checked for quality -
Apollo 1 in. PEX-A Expansion Sleeve/Ring (25-Pack)
$16.38 $9.01The Apollo ExpansionPEX 1 in. PEX-A Expansion Sleeve (25-Pack) is simple to install. Apollo ExpansionPEX are produced using PEX-A material. Apollo ExpansionPEX are required to create a secure Apollo ExpansionPEX connection. Apollo ExpansionPEX Expansion Sleeves are engineered with a bevel along the leading edge to ease pipe insertion and an integrated stop to ensure proper placement of the sleeve. The Apollo ExpansionPEX system is a comprehensive cold expansion piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Designed for use with Apollo ExpansionPEX fittings and pipe and is compatible with all expansion type (ASTM F1960) systems.
- Designed for use with 1 in. PEX-A pipe and 1 in. PEX-A barb fittings.
- Pro pack includes 25 sleeves.
- Requires expansion tool (sold separately) for use.
- For use exclusively with PEX-A (ASTM F1960) pipe and systems.
- Meets or exceeds ASTM F1960 and ASTM F877 standards.
- Meets UPC, IPC and cUPC standard.
- Rated to 200F and 200 psi.
Every item checked for quality -
BrassCraft 1/2 in. Nom Push Connect x 7/8 in. Ballcock x 12 in. SpeediOne Braided Toilet Connector and 1/4-Turn Straight Valve
$3.64 $2.00
Original Retail Price: $17.75.
BrassCraft has created an easy-to-install, one-piece connection. By combining our trusted bass supply stops with our dependable braided, vinyl and stainless steel connector – the results is a quick and easy installation. One-piece connectors are available in a wide variety of options for faucet, toilet and dishwasher applications.
- Connector is constructed with flexible braided polymer; stop is chrome plated brass.
- 1/2 in. nominal push connect x 1/2 in. FIP.
- No special installation tools required.
- Use in hot or cold water applications.
- Durable, flexible water connector requires no cutting or soldering during installation.
- Compatible with copper, PEX, and CPVC.
- Remove with combination removal tool or 5/8 in. open end wrench.
- Connector bends freely without kinking or crimping in tight quarters.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality
