Showing 163–171 of 260 results
-
BrassCraft Safety+PLUS2 Thermal Excess Flow valve (36,800 BTU) 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector
$27.27 $15.00BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. ID (3/8 in. OD).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
FloorMuffler 100 sq. ft. 4 ft. x 25 ft. x 0.04 in. Premium Underlayment for Vinyl Plank Flooring
$79.00 $43.45It’s what’s underneath that counts! FloorMuffler Encore is a high-performance acoustical underlayment for most vinyl plank and rigid core floor coverings with or without a pre-attached pad. As a premium grade underlayment, FloorMuffler Encore uses its closed-cell polypropylene foam construction and UltraSeal self-sealing lip and tape system to form a moisture barrier. FloorMuffler Encore is designed for floating floor installations and is the ideal underlayment for both residential and commercial projects.
- FOR PRE ATTACHED PAD FLOORS: For use with most vinyl plank and rigid core floor coverings with or without pre attached pad.
- ACOUSTICAL PERFORMANCE: Highest acoustic ratings on the market: HIIC up to 76, IIC up to 69 dB, STC up to 62 dB, Delta IIC up to 22 dB.
- MOISTURE PROTECTION: All-in-one moisture barrier means no additional films required. UltraSeal lip & tape system joins rolls at the seams to ensure moisture protection.
- LONG TERM PROTECTION: Superior compression characteristics help to ensure the integrity of your floor’s tongue and groove system. Check out the Third Party Verification Test Report in the Additional Resources section.
- ECO-FRIENDLY: Surpasses the indoor air quality emissions requirement for California’s Section 01350-the most stringent volatile organic compound (VOC) emissions standard in North America. Mold and Mildew Resistant.
- FLOORSCORE CERTIFIED.
- AROUND THE GLOBE: FloorMuffler has become the industry’s most trusted brand of underlayments with millions of square feet installed in residential and commercial applications around the world.
- INNOVATION is at the core of what we do. FloorMuffler Encore brings improved performance to attached pad flooring systems.
Every item checked for quality -
NDS PVC Adapter, 4 in. DWV/SCH40 Hub X S&D Hub
$9.51 $5.23Connect 4 in. Drain Waste Vent (DWV)/Schedule 40 (SCH40) pipe to 4 in. Sewer and Drain (S&D) pipe with the PVC Adapter. The drain fitting also connects 4 in. DWV/SCH40 pipe to select drainage products compatible with 4 in. S&D connections such as channel drain outlets, drainage grates, and pop-up emitters. This adapter is used to connect two different pipe types. The adapter is made of polyvinyl chloride (PVC) and makes a Hub X Hub solvent-weld connection. Meets applicable ASTM standards. For use in non-pressurized underground sewer and drainage applications; maximum working pressure of 5 psi. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects-or we’ll replace it. NDS offers free tools such as the Home Drainage Center, Calculators, and NDS Stormwater Drainage mobile app to help make your project a success. Founded in 1972, NDS is the preferred choice of professionals and the leader in stormwater management solutions with proven products, tools, and support to help you get the job done right.
Every item checked for quality -
24-inch, Rubbermaid Commercial Maximizer Dust Mop Refill with Hook & Loop Backing
$18.98 $10.44The 24-inch Rubbermaid Commercial Products Maximizer Dust Mop Pad is made to clean and dust for the long haul. Designed with durability in mind, the all-sewn construction can be commercially washed up to 40 times without bleach. The hook-and-loop back attaches securely to the frame, so you don’t have to worry about it coming loose—a handy feature when you’ve got a long cleanup ahead. This dust mop pad is ready to go when you get it. It’s been pre-treated so it will work just right the first time you use it. Designed to perform in a variety of common spaces, Maximizer cleaning tools deliver fast, consistent results shift after shift.
Every item checked for quality -
BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Outlet Diameter Compression Outlet 1/4-Turn Angle Valve, #64
$5.45 $3.00BrassCraft 1/2 in. Nominal push connect inlet x 3/8 in. Outlet Diameter push connect outlet 1/4-turn angle valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a 90 turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.
- 1-piece body construction provides strength, durability and long-lasting performance.
- 1/2 in. nominal push connect x 3/8 in. OD push connect.
- Compatible with copper, PEX or CPVC tubing.
- For use in potable water distribution systems, not intended for recirculating water systems that produce continuous use temperatures above 115°F for those applications, use our KT series ball stops.
- Smooth, quarter-turn operation, on/off flow control with a 90 turn of the handle.
- 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
- Easy-to-remove handle protects against accidental operation during rough-ins.
- Installation ready: requires no special tools, soldering OT glue for a watertight seal.
Every item checked for quality -
Black Pop up Sink Drain Stopper with Overflow, Bathroom Faucet Lavatory Vessel Pop Up
$18.18 $10.00
Press the top of the pop-up to close, and another press to open. Durable solid brass construction ensured quality and longevity. Please make sure the gaskets are in the right position to avoid leakage. Black finish build to resist daily scratches and corrosions. Fits hole diameter 1.57 inch to 1.92 inch & sink thickness 0.98 inch to 1.88 inch.Every item checked for quality -
Cap A Tread Bennett Valley Oak/Kettle Hill Oak 47in.Lx12.15in.Wx2.28in.T Vinyl Stair Tread and Reversible Riser Kit Adhesive
$66.96 $36.83Cap A Tread is a durable, seamless stair tread cover that is easily glued down over your existing stair treads. Use Cap A Tread to renew your stairs in a day to a fresh new look! Coordinates with many vinyl and laminate plank flooring colors.
- Buy the correct size for your existing treads: 1.69 in. Thick Cap A Tread will cover existing stair treads up to 1.3 in. thick; 2.28 in. Thick Cap A Tread will cover existing stair treads up to 1.9 in. thick.
- Cap A Tread adds character to your stairs, product visuals are designed to closely coordinate with flooring as there may be slight color and texture variation.
- Durable, seamless cover laminated over MDF.
- Coordinates with many flooring types and thicknesses, including vinyl and laminate plank flooring.
- Easy glue down installation to coordinate stairs with your floor.
- Designed to coordinate with many flooring colors, or can be used as a standalone retrofit for an existing stair finish, such as carpet.
- Allows the customer to achieve a great new look that is affordable.
- Cap A Tread fits over existing treads without having to modify them.
- Simply cut to fit and glue over the existing stair tread.
- For residential and light commercial use; interior use only.
- Easy to clean with just a damp cloth.
- Tread and riser kit includes a reversible riser that is white on one side and matching color on the other.
- Proudly manufactured by Zamma Corporation.
- Use only urethane based adhesive to install Cap-A-Tread.
Every item checked for quality -
HDX 50 Ft. 16/3 Tri-Tap Indoor/Outdoor Landscape Extension Cord, Green
$15.87 $8.73This Medium Duty Home Accents Holiday 50 ft. Multi-Outlet Extension Cord provides power for various electrical equipment. This kink free cord is designed for indoor and outdoor applications. This extension cord also features multiple outlet to provide power for more appliances. Color: Green.
Every item checked for quality
