Showing 10–18 of 260 results
-
SharkBite Push-to-Connect Faucet Installation Kit
$36.36 $20.00The SharkBite Faucet Installation Kit has everything you need to install your new faucet. The kit includes 2 SharkBite 1/2 in. x 1/4 in. (3/8 in. O.D.) Push-to-Connect Angle Stop Valves, two 5 ft. coils of 1/4 in. PEX Pipe, two 1/4 in. (3/8 in. O.D.) SharkBite x 1/2 in. Swivel Faucet Connectors, and a 1/2 in. Chrome Trim Cover reversed functions as a disconnect and 1/4 in. disconnect clip to remove the pipe from the fitting if needed. The SharkBite Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up under the sink providing a clean, tangle free look. Once the stop valves are installed, thread the 1/2 in. faucet connectors onto the faucet connections and then measure and cut the PEX and push into the outlet on the stop valve and the faucet connector and the installation is complete.
Every item checked for quality -
NATUREZWAY Plant-Based Compostable/Disposable Assorted Utensils (24-Count) Pack
$7.25 $3.99CO-FRIENDLY Naturezway is completely disposable, biodegradable, and environmentally friendly. NON-TOXIC – Naturezway is made entirely of natural materials and does not contain any plastics or toxic substances. PREMIUM QUALITY – Some of the words you may hear from visitors include Chic, Stylish, Modern, and Cool. INSPIRING – Demonstrates to everyone that being ecologically conscious can also be chic, elegant, and in style. CONVENIENT – Simply dispose of them after use to enjoy the peace of mind that plastic cannot provide.
Every item checked for quality -
Commercial Electric Ultra Slim 4 in. Color Selectable New Construction & Remodel IC Rated Indoor/Outdoor Integrated LED Recessed Light Kit
$22.47 $12.36The Color Temperature Select Recessed Lighting Kits are the recessed lights of the future. Not only is each fixture designed specifically for small spaces where height clearance is limited such as beams or ductwork, you can change the color temperature with a flick of a button. The integrated color changing switch is located on the cable so you can choose between a 2700, 3000, 3500, 4000 or 5000 Kelvin temperature to best suit your needs. 2700 or 3000 Kelvin is perfect for relaxing, 3500 or 4000 Kelvin is the ideal choice for everyday affairs and 5000 Kelvin is great for task lighting in a basement, hallway or work area. Energy Star certified, and IC rated for direct contact with insulation, these lights won’t overheat, do not require a bulky can and will last for years to come – 50,000 hours or approximately 34 years if used for 4 hours per day to be exact. Wet rated and certified airtight, this 4 in. kit is perfect for your bathroom, drop ceilings, outdoor soffits and all general lighting applications.
- SELECTABLE COLOR TEMPERATURE: with the flick of a button, choose the color temperature that works best for your space – 2700 – 3000 Kelvin is perfect for relaxing, 3500 – 4000 Kelvin is the ideal choice for everyday affairs and 5000 Kelvin is great for task lighting in a basement, hallway or work area.
- EASY INSTALL SLIM LED: an ultra-thin profile, integrated LED and a slim junction box will not interfere with your joists or ductwork. Effortless push and click quick connects allows for worry free, easy installation and are the choice of professional electricians. Actual hole size is 4.25-inches. Trim size: 5-inches.
- LIGHT SPECS: 60W equivalent Integrated LED using only 9W – 2700K/3000K/3500K/4000K or 5000K color temperature choice – 90 CRI for brighter colors – bright 540 lumens – 50,000-hour, 34 year, lifespan – Energy Star Certified.
- WET RATED AND AIRTIGHT: perfect for showers, bathrooms, outdoor soffits and all general lighting applications.
- IC RATED: for direct contact with insulation – no recessed can required. CEC Title 24 Compliant.
- DIMMABLE: fully dimmable from 100% to 10% with an LED compatible dimmer switch to create the perfect atmosphere (dimmer switch sold separately).
- ENERGY STAR CERTIFIED: reduce energy, maintenance and cooling costs with an Energy Star certified integrated LED technology, meeting the highest Energy Star standards, this light is sure to be the highest quality product for years to come with no bulbs required.
Every item checked for quality -
Wilkins 3/4 in. Lead Free Brass NPT Pressure Relief Valve
$37.40 $20.57The P1000AXL-150C Pressure Relief Valve is set at 150 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.
- Eliminates risk of over-pressure of storage tanks.
- Epoxy-coating adds extra protection.
- Pressure relief valve set at 150 psi.
- CSA Compliance to ANSI Z21.22/CSA 4.4.
- Certified to ASME Section IV by National Board.
- Pressure relief valve settings of 30, 75, 125, and 150 psi offer versatility.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector (1/2 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (85,000 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality -
2 in. Center Stop PVC Coupling Conduit Fitting
$1.80 $0.99Elevate your electrical installations with this Center Stop Coupling, an essential component crafted to deliver exceptional performance and reliability. This electrical conduit fitting is engineered from premium-grade PVC material to ensure robustness and longevity. Its innovative design features a center stop mechanism that facilitates precise alignment and seamless connection between conduits, simplifying installation processes and reducing downtime on the job site. Our PVC coupling is ideal for a wide range of applications, both indoors and outdoors. It provides a dependable solution for residential, commercial, and industrial electrical projects. Its corrosion-resistant properties make it suitable for use in diverse environments, from damp basements to exposed outdoor installations, ensuring longevity and reliability in any condition. Our PVC coupling meets and exceeds expectations in the electrical industry. You can use it to upgrade existing infrastructure or start a new installation.
- 2 in. standard center stop coupling is used to join lengths of conduit pipe together with 2 solvent weld socket ends.
- Electrical conduit fitting is designed for use with schedule 40 and 80 conduits and may also be used with EB and DB duct applications.
- Durable non-conductive PVC coupling won’t rust or corrode.
- Our PVC coupling is UL-listed and resistant to a wide range of chemicals, acids, and salts.
- It’s non-conductive, sunlight-resistant, and designed for use aboveground and underground.
Every item checked for quality
