Showing 10–18 of 260 results
-
Halo HLBSL 4 in. Adjustable CCT Canless IC Rated Dimmable Indoor, Outdoor Integrated LED Recessed Light Kit
$13.87 $7.63Halo HLB4 Selectable Series Downlights are complete 4 in. ultra-thin canless recessed lights designed for use in new construction, remodel and retrofit installation, without needing a housing or j-box. Ultra-slim design goes where LED can lights can’t. Choose your color temperature directly on the fixture. With the flick of a switch, you can choose between 3 color temperatures ranging from warm (3000K) to daylight (5000K) prior to installing into your ceiling. This Halo recessed lighting fixture features an LED driver that offers 120-Volt dimming capability. The HLB4 LED recessed lighting soft lens provides uniform illumination and wet location listing.
- Housing and J-box not required, easy to install spring clips firmly secure recessed LED lights in ceiling.
- Repositionable driver junction box.
- Selectable CCT allows customization to create perfect lighting for your home all throughout your house.
- Choose between 3-discrete color temperature settings ranging from soft (3000K) to daylight (5000K).
- LED recessed lights with attractive round Halo matte white finish and textured lens to provide smooth light distribution.
- LED recessed lights are built to last with maintenance-free energy efficient LED’s, eliminating your need to use and replace bulbs.
- LEDs have 35,000-hours of life, eliminating your need to use and replace bulbs.
- Good brightness at 675 Lumens (at 3000K color temperature) recessed lights provide illumination to any room.
- 90 CRI, title 24 Compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
- Air-tite, wet rated recessed lights can be used in shower and outdoor light applications.
- Designed for continuous dimming down to 5%, standard 120-Volt electronic low-voltage dimmer is recommended for best performance.
- Halo 4 in. LED lights are IC rated, for direct contact with insulation.
- 4 in. recessed lighting produces light equivalent to a 60-Watt bulb yet uses just 12-Watt (see product spec sheet to confirm).
- 1/2 in. D makes this product great for use in shallow ceilings.
- Fits into applications with as little as 3.5 in. plenum clearance.
- ENERGY STAR qualified for energy conservation.
Every item checked for quality -
Lithonia Lighting Contractor Select LQM Series 120/277-Volt Integrated LED White and Red Exit Sign W/Back Up Battery
$79.96 $43.98The Lithonia Lighting Quantum Thermoplastic LED Emergency Exit Sign features an engineering-grade thermoplastic housing that is impact resistant, scratch resistant and corrosion proof. This exit sign uses LED light bulbs and has a nickel-cadmium battery. Innovative snap-together design allows installation in less than 3-minutes.
- 180 Lumens.
- White sign with red lettering.
- Thermoplastic housing.
- Meets UL 924 requirements.
- Uses two 1-Watt LED light strips (included).
- Nickel-cadmium backup battery.
Every item checked for quality -
Brondell CleanSpa Enhanced Hand-Held Bidet
$54.98 $30.24The Brondell CleanSpa Enhanced Hand Held Bidet provides an affordable and easy way to upgrade your health and hygiene. The CleanSpa Enhanced Bidet Sprayer can be DIY installed in minutes by connecting to your toilets clean water supply line and it features enhanced total control thumb controlled water pressure adjustment. A metal T-valve with brass core allows additional water pressure adjustment and acts as a shutoff mechanism after each use along with a flexible metal spiral bidet hose with patented inner woven core. Only parts of the highest quality are used and all necessary parts for standard installation are included. Start achieving a more complete clean today.
Every item checked for quality -
#26, BrassCraft 1/2 in. Compression Inlet x 3/8 in. Compression Outlet Straight Valve
$5.45 $3.00
BrassCraft 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet 1/4 in. Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.
- Compatible with copper or PEX (PEX installations require a stainless steel tube insert).
- Smooth, quarter-turn operation, ON/OFF flow control with a 90° turn of the handle.
- 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
- Easy-to-remove handle protects against accidental operation during rough-ins.
- 1-piece body construction for strength, durability and long-lasting performance.
- Chrome-plated brass.
- Temperature rating: 40°F to 160°F.
- Pressure rating: 125 psi maximum.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality -
Apollo 1/2 in. and 3/4 in. PEX-B SS Sleeve Tool
$59.38 $32.66The ApolloPex Combo PEX Stainless Steel Sleeve Tool is a 2-in-1 tool designed to secure 1/2 in. and 3/4 in. stainless steel sleeves (not included) into place within PEX piping systems. There are no loose components, jaws to change, or adjustments to be made to create either size connection. Connections may be checked for security using the Go/No-Go Gauge (included). The ApolloPex system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Designed for use with 1/2 in. and 3/4 in. stainless steel sleeves (not included).
- Creates a secure dual crimp at each connection.
- Contoured, comfort-grip handles accommodate gloved and bare hands.
- Hardened steel construction ensures reliability and durability.
- Factory calibrated to ensure proper connections right out of the box.
- Smooth actuation mechanism allows secure connections with minimal force required.
- Secures sleeves into place with dual crimping action.
Every item checked for quality -
2 in. PVC Fitting – Meter Offset (Standard Fitting)
$5.35 $2.94The 2 in. Non-Metallic Meter Offset is a high-quality fitting designed for indoor and outdoor use. Non-metallic PVC resists rust, corrosion, impact and the damaging effects of sunlight. The meter offset features external ridges for containment in concrete and can be used with sch. 40 and sch. 80 conduit.
- Brings electrical service into a meter box.
- Non-metallic PVC is heat, fire and corrosion resistant.
- Compatible with sch. 40 or sch. 80 conduit.
- Ridges on the outside for concrete encasement.
- UL Listed for safety and peace of mind.
- Socket on 1 end with threads on offset for easy installation.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (71,100 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCrafts stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality
