Showing 181–189 of 260 results
-
24 in. W x 22 in. D x 36.4 in. H Bathroom Vanity in Grey with Marble Stone Vanity Top in White with Single White Sink
$600.00 $330.00Complete your bathroom renovation with this vanity set. It’s made from 100% solid wood in grey paint finish. The surface is made from marble with a backsplash that protects your walls from spills and splashes. It also accommodates a big rectangular ceramic basin in a white finish. The soft-closing drawer and doors allow you to store an assortment of bathroom essentials. This vanity ensures both form and function in your bathroom or powder room for you and your guests.
- Vanity was crafted from solid wood and grey color paint finish, it is arranged with one drawer and two doors which offer usable effortless storage.
- White marble countertop – this top includes backsplash, 1-undermount porcelain sink, 3-pre-drilled holes for widespread faucets.
- Sliders are concealed soft-close function, ideal for your bathroom as it prevents any slamming noises.
- Included: cabinet, top, basin, backsplash, hardware.
- Not included: faucet and mirror.
- Brushed Nickel finish for handles.
- Factory assembled base cabinet of the vanity has an easy installation.
Every item checked for quality -
FloorMuffler 100 sq. ft. 4 ft. x 25 ft. x 0.04 in. Premium Underlayment for Vinyl Plank Flooring
$79.00 $43.45It’s what’s underneath that counts! FloorMuffler Encore is a high-performance acoustical underlayment for most vinyl plank and rigid core floor coverings with or without a pre-attached pad. As a premium grade underlayment, FloorMuffler Encore uses its closed-cell polypropylene foam construction and UltraSeal self-sealing lip and tape system to form a moisture barrier. FloorMuffler Encore is designed for floating floor installations and is the ideal underlayment for both residential and commercial projects.
- FOR PRE ATTACHED PAD FLOORS: For use with most vinyl plank and rigid core floor coverings with or without pre attached pad.
- ACOUSTICAL PERFORMANCE: Highest acoustic ratings on the market: HIIC up to 76, IIC up to 69 dB, STC up to 62 dB, Delta IIC up to 22 dB.
- MOISTURE PROTECTION: All-in-one moisture barrier means no additional films required. UltraSeal lip & tape system joins rolls at the seams to ensure moisture protection.
- LONG TERM PROTECTION: Superior compression characteristics help to ensure the integrity of your floor’s tongue and groove system. Check out the Third Party Verification Test Report in the Additional Resources section.
- ECO-FRIENDLY: Surpasses the indoor air quality emissions requirement for California’s Section 01350-the most stringent volatile organic compound (VOC) emissions standard in North America. Mold and Mildew Resistant.
- FLOORSCORE CERTIFIED.
- AROUND THE GLOBE: FloorMuffler has become the industry’s most trusted brand of underlayments with millions of square feet installed in residential and commercial applications around the world.
- INNOVATION is at the core of what we do. FloorMuffler Encore brings improved performance to attached pad flooring systems.
Every item checked for quality -
EcoSmart 65-Watt Equivalent BR30 Dimmable Energy Star LED Light Bulb Soft White (6-Pack)
$19.85 $10.92The EcoSmart BR30 LED soft white is an indoor flood light bulb perfect BR30 shape to fit your indoor recessed cans or track light fixtures. The usual locations that this bulb is installed are kitchen, living room, dinner, office or bedroom. It is a perfect replacement of your traditional incandescent, CFL or Halogen lamps. It only uses 9-Watt and lasts for more than 20-years. The soft white light color creates a relaxing and comfortable environment and is particularly good in living, dinner or bedroom environment.
- Brightness: 650-Lumens.
- Estimated yearly energy cost: $1.08 (based on 3-hours/day, 11/kWh, costs depend on rates and use).
- Life: 22.8-years (based on 3-hours/day).
- Light appearance: 2,700K (soft white).
- Energy used: 9-Watt (equivalent to a 65-Watt standard incandescent light bulb).
- Lumens per watt: 73.
- Uses 86% less energy compared to a standard incandescent light bulb.
- Ideal for use in recessed cans and track light fixtures.
- Fully dimmable with a shadow-free experience, damp locations rated.
- Contains mercury: no.
- Not for use in totally enclosed fixtures.
- Not for use in recessed luminaires.
- Damp location rated.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Toro Walk-Behind Power Mower Tune-Up Maintenance Kit for Tecumseh Engines
$25.51 $14.03Keep your mower running smoothly, season after season. This kit is for walk-behind power mowers with Tecumseh engines. The kit contains 20 oz. SAE 30 engine oil, spark plug, air filter and fuel stabilizer. The easy-to-use kit includes a Toro replacement air filter, a replacement spark plug, a 20 oz. bottle of Toro walk-behind power mower engine oil and a packet of fuel stabilizer.
- For questions about service and repair, please reference the Service & Repair document.
- Fits Kohler XT6/XT6.5/XT6.75 small engines.
- For Toro walk-behind power mowers with Tecumseh engines (not included).
- Packet of fuel stabilizer keeps up to 2.5 Gal. of fuel fresh for up to 24 months.
- Easy-to-use kit includes a Toro replacement air filter, a replacement spark plug, a 20 oz. bottle of Toro walk-behind power mower engine oil and a packet of fuel stabilizer.
Every item checked for quality -
Husky 1-1/2 in. Quick-Release Telescoping Basin Wrench
$19.98 $10.99Husky s Quick Release Telescoping Plumbing Basin Wrench is ideal for tightening and removing faucet and fill valve nuts. It features a versatile multi-position telescoping range of 12-1/2 in. up to 19 in. for hard to reach valves. It also features an extra-large spring-loaded jaw with a capacity of 3/8 in. up to 1-1/2 in.…
Every item checked for quality -
Potrisers Invisible Pot Feet for Containers & Statuary
$3.98 $2.19POTRISERS, made from 100-percent recycled material, were designed to be an eco-friendly, indestructible and low profile alternative to decorative pot feet, trays and trivets. While remaining hidden, POTRISERS can be fitted to heavy, pre-planted containers. Rubberized material grips surfaces while providing cushioning on hard or uneven surfaces such as wood, concrete, aggregate, compacted materials or stone. POTRISERS come in both retail and bulk packaging. Designed to protect and hide drip lines, POTRISERS allow for easy cleaning and provide crucial drainage needed for healthy plants. By floating containers off the ground, pots are less likely to freeze and crack in cold temperatures. Stack them to level planters on slopes. Suggested Use: Equally space 4 risers beneath outside edges of pot. If using with a tray – place a set below the tray to prevent water rings or condensation on surfaces, and within the tray beneath the pot to allow the pot to drain freely. POTRISERS have been field tested by the Engineering Laboratory of the University of Washington for strength and field tested for durability. This standard riser, recommended for small to medium pots and statuary, will support up to 1600-pound (per set of 4).
Every item checked for quality -
Juno 75-Watt Flared Steps Satin Chrome Track Lighting Head
$26.29 $14.46The Juno Trac-Lites Flared-Step Track Light offers a contemporary shape. It provides exceptional task and accent lighting when installed on the economical Juno Trac-Lites system. The perfect blend of form, function and value, this fixture features a durable, drawn-steel housing with a high-quality satin chrome finish.
- Bulb NOT Included.
- Drawn-steel track light housing with satin chrome finish is durable and attractive.
- 90° vertical aiming capability and 358° rotation permit light-beam adjustment for virtually any task or accent lighting application.
- Spring-loaded locking latch on mounting adapter provides secure attachment of fixture to track.
- Patented, embossed polarity arrow on bottom of mounting adapter assures proper electrical connection.
Every item checked for quality -
Apollo 1 in. PEX-A Expansion Sleeve/Ring (25-Pack)
$16.38 $9.01The Apollo ExpansionPEX 1 in. PEX-A Expansion Sleeve (25-Pack) is simple to install. Apollo ExpansionPEX are produced using PEX-A material. Apollo ExpansionPEX are required to create a secure Apollo ExpansionPEX connection. Apollo ExpansionPEX Expansion Sleeves are engineered with a bevel along the leading edge to ease pipe insertion and an integrated stop to ensure proper placement of the sleeve. The Apollo ExpansionPEX system is a comprehensive cold expansion piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Designed for use with Apollo ExpansionPEX fittings and pipe and is compatible with all expansion type (ASTM F1960) systems.
- Designed for use with 1 in. PEX-A pipe and 1 in. PEX-A barb fittings.
- Pro pack includes 25 sleeves.
- Requires expansion tool (sold separately) for use.
- For use exclusively with PEX-A (ASTM F1960) pipe and systems.
- Meets or exceeds ASTM F1960 and ASTM F877 standards.
- Meets UPC, IPC and cUPC standard.
- Rated to 200F and 200 psi.
Every item checked for quality
