Showing 190–198 of 260 results
-
WIEGMANN Outdoor Enclosure 8 in. x 8 in. x 4 in. NEMA 3R Screw Cover/Pull Box
$59.98 $32.99WIEGMANN 8 In. x 8 In. x 4 In. rain-proof screw cover box is made of pre-galvanized steel and a gray polyester powder inside and out. It is designed for indoor or outdoor locations. The screw cover box features a drip shield top and smooth seamless sides, front, and back, knockouts are standard in the bottom, no gasket is required, hasp for padlocking and provisions for meter seal are provided. A slip on reversible, removable cover is securely fastened with screws located along the bottom edge and ideal for surface mounting.- Model #RSC080804RC.
- Designed for use as wiring boxes and junction boxes.
- Provide protection in outdoor applications against rain, sleet, and snow, or indoors against dripping water.
- ANSI-61 gray polyester powder inside and out.
- Drip shield top and smooth seamless sides and front.
- Mounting holes provided on back of enclosure.
- Hasp for padlocking or meter seal is provided.
Every item checked for quality -
SunTouch Floor Warming 72 in. x 30 in. 120-Volt Radiant Floor Heating Mat
$189.00 $103.95This 120 volt 6 foot x 30 inch SunTouch floor warming mat adds comfort and a touch of luxury to a home. This ultra-thin, low-profile system installs beneath tile, stone and even vinyl or laminate flooring. It’s ideal for remodeling bathrooms and kitchens and offers an upscale option when designing new construction. It is energy efficient as well as inexpensive to operate. Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels and it is UL listed for safety.
- Energy efficient, inexpensive to operate.
- Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels.
- Single point power connection makes layout and wiring a snap.
- Armored power lead, wire straight to the electrical box, no conduit required.
- Heat-up times are generally 30-45 minutes for framed floors, slabs take longer.
- High-quality heating cable made with oxygen-free copper heating element surrounded by ETFE insulation and a braided metal grounding jacket.
- Power lead is color-coded green (ground), black (power), and white (neutral).
- SunTouch is made in the USA and tested by the Tile Council of America.
- Mats can be connected in parallel for larger floor surfaces.
- Can be combined with a thermostat control (not included).
Every item checked for quality -
BrassCraft 1/2 in. Nominal Push Connect x 1/2 in. FIP x 20 in. SpeediOne Braided Faucet Connector and 1/4-Turn Straight Valve
$3.64 $2.00Original Retail Price: $17.75.
BrassCraft’s push connect one-piece water supply combines their trusted brass water valve with their flexible braided polymer connector for one quick easy-to-install solution. BrassCraft’s one-piece connection features push connect technology on the valve inlet and a hand-tighten wing nut on the outlet to provide a significant savings in installation time and cost. Push connect valve inlet requires no special tools to install and comes equipped with a pre-inserted tube stiffener to make the product ideal for copper, PEX and CPVC piping systems. The braided polymer fibers of the connector are designed to bend freely without kinking or crimping in tight quarters and resist corrosion caused by chemicals found in common household, tile and glass cleaners. In addition, its reinforced inner hose resists corrosion under harsh water conditions.
- 1-piece unit combines valve and supply line.
- Saves time with one less connection.
- No special installation tools required.
- Installation ready with pre-inserted tube stiffener.
- Fast, reliable and secure.
- Compatible with copper, PEX and CPVC.
- Remove with combination removal tool or 5/8 in. open end wrench.
- Connector bends freely without kinking or crimping in tight quarters.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality -
Troy-Bilt Original Equipment Drive Belt for Select Troy-Bilt 21 in. Mowers and Select Snow Throwers OE 954-04260, 754-04260
$24.98 $13.74Troy-Bilt belts are designed and tested to consistently meet original equipment performance standards. Specially engineered tension and compression materials are used to resist wear and provide optimum strength and performance. For the best cutting performance, routinely inspect belts and replace when they show signs of wear. To protect your investment, specify and use only Troy-Bilt parts.
- Original equipment part for drive belts starting with 954-04260 and 754-04260.
- Belt fits Troy-Bilt 21 in. walk-behind mowers and 2-stage snow throwers.
- Factory tested and approved to provide the perfect fit, strength, durability and performance.
- Oil, heat and dirt resistant material provides superior durability.
- Made of Kevlar material to withstand continuous bending around pulleys.
- Uniform alignment of cords allows for even distribution for wear to maximize performance.
- For detailed installation instructions, please refer to your instruction manual.
Every item checked for quality -
Cap A Tread Bennett Valley Oak/Kettle Hill Oak 47in.Lx12.15in.Wx2.28in.T Vinyl Stair Tread and Reversible Riser Kit Adhesive
$66.96 $36.83Cap A Tread is a durable, seamless stair tread cover that is easily glued down over your existing stair treads. Use Cap A Tread to renew your stairs in a day to a fresh new look! Coordinates with many vinyl and laminate plank flooring colors.
- Buy the correct size for your existing treads: 1.69 in. Thick Cap A Tread will cover existing stair treads up to 1.3 in. thick; 2.28 in. Thick Cap A Tread will cover existing stair treads up to 1.9 in. thick.
- Cap A Tread adds character to your stairs, product visuals are designed to closely coordinate with flooring as there may be slight color and texture variation.
- Durable, seamless cover laminated over MDF.
- Coordinates with many flooring types and thicknesses, including vinyl and laminate plank flooring.
- Easy glue down installation to coordinate stairs with your floor.
- Designed to coordinate with many flooring colors, or can be used as a standalone retrofit for an existing stair finish, such as carpet.
- Allows the customer to achieve a great new look that is affordable.
- Cap A Tread fits over existing treads without having to modify them.
- Simply cut to fit and glue over the existing stair tread.
- For residential and light commercial use; interior use only.
- Easy to clean with just a damp cloth.
- Tread and riser kit includes a reversible riser that is white on one side and matching color on the other.
- Proudly manufactured by Zamma Corporation.
- Use only urethane based adhesive to install Cap-A-Tread.
Every item checked for quality -
ROPPE Self-Stick Black 4 in. x 20 ft. x 0.080 in. Vinyl Wall Cove Base Coil
$25.71 $14.14Low cost and good looks highlights Roppe’s Type TV thermoplastic Vinyl base. It’s extremely durable without sacrificing attractiveness, and very economical because it’s made from PVC Vinyl. With its moderate pricing and beautiful color palette, our Vinyl wall base is an outstanding selection four any installation.
- Withstands scratches/scuffs from daily wear.
- Superior durability for indoor commercial or residential use.
- Uniform height helps conceal floor and wall irregularities.
- Ribbed back for easy adhesion.
- Co-extruded top layer resists scuffs and scratches.
- Black in color.
- 20 ft. coil.
Every item checked for quality -
2 in. Center Stop PVC Coupling Conduit Fitting
$1.80 $0.99Elevate your electrical installations with this Center Stop Coupling, an essential component crafted to deliver exceptional performance and reliability. This electrical conduit fitting is engineered from premium-grade PVC material to ensure robustness and longevity. Its innovative design features a center stop mechanism that facilitates precise alignment and seamless connection between conduits, simplifying installation processes and reducing downtime on the job site. Our PVC coupling is ideal for a wide range of applications, both indoors and outdoors. It provides a dependable solution for residential, commercial, and industrial electrical projects. Its corrosion-resistant properties make it suitable for use in diverse environments, from damp basements to exposed outdoor installations, ensuring longevity and reliability in any condition. Our PVC coupling meets and exceeds expectations in the electrical industry. You can use it to upgrade existing infrastructure or start a new installation.
- 2 in. standard center stop coupling is used to join lengths of conduit pipe together with 2 solvent weld socket ends.
- Electrical conduit fitting is designed for use with schedule 40 and 80 conduits and may also be used with EB and DB duct applications.
- Durable non-conductive PVC coupling won’t rust or corrode.
- Our PVC coupling is UL-listed and resistant to a wide range of chemicals, acids, and salts.
- It’s non-conductive, sunlight-resistant, and designed for use aboveground and underground.
Every item checked for quality -
Halex 2 in. Rigid 90-Degree Conduit Elbow
$25.20 $13.86The 2 in. 90 degree Conduit Elbow is intended for use to make a 90 degree directional change when installing rigid or intermediate metal conduit (IMC) in indoor or outdoor applications. Large radius for easy wire pulling. CSA- and UL Listed.
- Use to make a 90 degree directional change when installing rigid or IMC conduit.
- Galvanized-steel construction.
- Corrosion resistant.
- For indoor or outdoor use.
Every item checked for quality -
EcoSmart 65-Watt Equivalent BR30 Dimmable CEC LED Light Bulb Soft White (6-Pack)
$17.76 $9.77Use the BR30 Dimmable LED light bulb in locations around your home such as the kitchen, living room or a home office. It is the perfect BR30 shape to fit your indoor recessed cans or track light fixtures. The bulb can replace traditional incandescent, CFL or halogen lamps. It only uses 9-Watt of power and can last up to 10 years based on a 3-hour a day usage schedule. The soft white light color gives off a comfortable and relaxing hue great for a dimly lit evening dinner.
- Brightness: 660 Lumens.
- Estimated yearly energy cost: $1.08 (based on 3-hours/day, 11/kWh, costs depend on rates and use).
- Life: 10-year (based on 3-hours/day).
- Light appearance: 2,700K (soft white).
- Energy used: 9-Watt (equivalent to a 65W standard incandescent light bulb).
- Lumens per watt: 72.
- Uses 86% less energy compared to a standard incandescent light bulb.
- Ideal for use in recessed cans and track light fixtures.
- Fully dimmable with a shadow-free experience, damp locations rated.
- Contains mercury: no.
- California Energy Commission Title 20 Compliant LED Light Bulb.
Every item checked for quality
