Showing 190–198 of 260 results
-
Intermatic 40 Amp 60-Minute Indoor Wall Mounted Mechanical Water Heater Timer, Steel, Gray
$77.11 $42.41With the easy-to-set Yellow Dial, these time switches allow for basic control of electric water heaters. These time switches offer a minimum ON/OFF time of 1-hour and are available for 208-250 VAC applications. With the proven reliability of our mechanical line, these time switches provide dependable electric water heater control.
- 2-sets of on/off trippers.
- Enables shifting electricity use into off-peak hours to reduce energy costs.
- Convenient external override switch.
- Up to 12 on/12 pff events with the purchase of additional trippers (156T1978A).
- Metal indoor enclosure.
Every item checked for quality -
1/2 in. PVC Male Adapter
$0.55 $0.30
PVC non-metallic fittings can be used with Sch. 40 and Sch. 80 RIGID non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. Fittings insure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are nonconductive assuring a safe system. Resistant to sunlight and listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode.
- Can be used to join RIGID non-metallic conduit (RNC).
- Compatible with Sch. 40 and Sch. 80 RIGID non-metallic conduit (RNC).
- For use in aboveground and underground applications as well as exposed outdoor usage.
- Durable PVC construction means no rusting or corroding.
- Weighing less than metallic systems means more efficient and quicker installation time.
- UL listed.
Every item checked for quality -
KODO 120-Watt Equivalent PAR38 LED Motion Sensor Flood Light Bulb Bright White (2-Pack)
$19.87 $10.93The KODO LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 35 ft. range and keeps lights on for 5 minutes after the last detected movement. The sensor detection angle is 100°. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.
- Radar motion sensor up to 35 ft. turns on lights for 5-minutes.
- 100° detection angle.
- Daylight sensor keeps daytime motion from triggering the lights.
- Easily deactivate sensors to allow for constant 24/7 bulb operation.
- Switch lights ON for normal motion sensor mode.
- Switch OFF, then back ON (within 3-seconds) for always-on, 24/7 operation.
- Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
- 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
- 1200 Lumens each bulb.
- Not for use with existing motion sensor fixtures.
- Light appearance: 3,000K (bright white).
Every item checked for quality -
Commercial Electric Ultra Slim 4 in. Color Selectable New Construction & Remodel IC Rated Indoor/Outdoor Integrated LED Recessed Light Kit
$22.47 $12.36The Color Temperature Select Recessed Lighting Kits are the recessed lights of the future. Not only is each fixture designed specifically for small spaces where height clearance is limited such as beams or ductwork, you can change the color temperature with a flick of a button. The integrated color changing switch is located on the cable so you can choose between a 2700, 3000, 3500, 4000 or 5000 Kelvin temperature to best suit your needs. 2700 or 3000 Kelvin is perfect for relaxing, 3500 or 4000 Kelvin is the ideal choice for everyday affairs and 5000 Kelvin is great for task lighting in a basement, hallway or work area. Energy Star certified, and IC rated for direct contact with insulation, these lights won’t overheat, do not require a bulky can and will last for years to come – 50,000 hours or approximately 34 years if used for 4 hours per day to be exact. Wet rated and certified airtight, this 4 in. kit is perfect for your bathroom, drop ceilings, outdoor soffits and all general lighting applications.
- SELECTABLE COLOR TEMPERATURE: with the flick of a button, choose the color temperature that works best for your space – 2700 – 3000 Kelvin is perfect for relaxing, 3500 – 4000 Kelvin is the ideal choice for everyday affairs and 5000 Kelvin is great for task lighting in a basement, hallway or work area.
- EASY INSTALL SLIM LED: an ultra-thin profile, integrated LED and a slim junction box will not interfere with your joists or ductwork. Effortless push and click quick connects allows for worry free, easy installation and are the choice of professional electricians. Actual hole size is 4.25-inches. Trim size: 5-inches.
- LIGHT SPECS: 60W equivalent Integrated LED using only 9W – 2700K/3000K/3500K/4000K or 5000K color temperature choice – 90 CRI for brighter colors – bright 540 lumens – 50,000-hour, 34 year, lifespan – Energy Star Certified.
- WET RATED AND AIRTIGHT: perfect for showers, bathrooms, outdoor soffits and all general lighting applications.
- IC RATED: for direct contact with insulation – no recessed can required. CEC Title 24 Compliant.
- DIMMABLE: fully dimmable from 100% to 10% with an LED compatible dimmer switch to create the perfect atmosphere (dimmer switch sold separately).
- ENERGY STAR CERTIFIED: reduce energy, maintenance and cooling costs with an Energy Star certified integrated LED technology, meeting the highest Energy Star standards, this light is sure to be the highest quality product for years to come with no bulbs required.
Every item checked for quality -
HALO 8 in. Selectable CCT and Lumens New Construction Canless Recessed Integrated LED Kit
$61.47 $33.81The HLB8 is a 8 in. ultra-thin LED lens downlight with remote driver/junction box suitable for new construction and remodel applications. Field selectable color temperature and high color rendering provide excellent color performance. Simplified installation in drywall or suspended ceilings eliminates recessed cans saving time and money. Installs from below the ceiling in as little as 3-1/2 in. plenum height, can be used in direct contact with insulation and is airtight. Use for general area lighting in low to medium height ceilings where energy savings, long life and economy are required.
- Suitable for IC and non-IC applications.
- 120-Volt to 277-Volt with 0-Volt to 10-Volt dimming.
- 90 CRI (min), R9 50 and color accuracy within 4 SDCM.
- Dimmable down to 5%.
- Wet location listed for showers and protected ceilings.
- ENERGY STAR.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (71,100 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCrafts stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality -
Sharkbite Prolock 1 In. Push-To-connect Plastic 90-Degree Elbow Fitting Pro Pack (3-Pack)
$28.96 $15.93SharkBite ProLock fittings are a versatile and innovative full-flow plumbing system utilizing push lock fitting technology and engineered specifically for use with SharkBite PE-RT and PEX pipe. The SharkBite 1 in. Push-to-Connect 90° Elbow intuitive design makes for one of the simplest and most dependable fittings on the market. No tools are required to make a connection. They use a collet with stainless steel teeth that grips the pipe when fully inserted, and an EPDM O-Ring to provide a permanent, leak-proof seal. The Twist-to-lock technology ensures maximum security. When twisted into place with indicator arrows aligned, the locking cap locks the pipe in place and creates an audible click. Removing a SharkBite fitting is just as easy with no tools needed; simply twist the cap turn counterclockwise to unlock then depress collet against the fitting to remove the pipe. ProLock fittings are suitable for hot and cold potable water and hydronic heating applications. They have been specifically designed for the Professional Plumber. Code approved for behind-the-wall installations.
Every item checked for quality -
2 in. PVC Fitting – Meter Offset (Standard Fitting)
$5.35 $2.94The 2 in. Non-Metallic Meter Offset is a high-quality fitting designed for indoor and outdoor use. Non-metallic PVC resists rust, corrosion, impact and the damaging effects of sunlight. The meter offset features external ridges for containment in concrete and can be used with sch. 40 and sch. 80 conduit.
- Brings electrical service into a meter box.
- Non-metallic PVC is heat, fire and corrosion resistant.
- Compatible with sch. 40 or sch. 80 conduit.
- Ridges on the outside for concrete encasement.
- UL Listed for safety and peace of mind.
- Socket on 1 end with threads on offset for easy installation.
Every item checked for quality -
1-1/4 in. Center Stop PVC Coupling Conduit Fitting
$1.51 $0.83This connector consists of two solvent weld female ends. A center stop ensures positioning of conduit. The coupling is made of rigid PVC.
- Connects conduit of the same diameter.
- Non-corrosive PVC construction.
- Joins metal conduit to PVC conduit or PVC to PVC.
- UL and CSA safety listed for greater safety and peace of mind.
Every item checked for quality
