Showing 199–207 of 260 results
-
ROPPE Vinyl Self Stick Almond 4 in. x 0.080 in. x 20 ft. Wall Cove Base Coil
$18.18 $10.00Low cost and good looks highlights ROPPE’s Type TV thermoplastic Vinyl base. It’s extremely durable without sacrificing attractiveness, and very economical because it’s made from PVC Vinyl. With its moderate pricing and beautiful color palette, our Vinyl wall base is an outstanding selection 4 any installation.
- Original retail price: $25.71.
- Withstands scratches/scuffs from daily wear.
- Superior durability for indoor commercial or residential use.
- Uniform height helps conceal floor and wall irregularities.
- Ribbed back for easy adhesion.
- Homogeneous color is inherent through the base and superior finish resists scuffing gouging and most chemicals.
- Intended for commercial or residential use.
- 20 ft. coil.
- Almond in color.
Every item checked for quality -
1-1/2 in. Center Stop PVC Coupling Conduit Fitting
$1.51 $0.83This connector consists of two solvent weld female ends. A center stop ensures positioning of conduit. The coupling is made of rigid PVC.
- Connects conduit of the same diameter.
- Non-corrosive PVC construction.
- Joins metal conduit to PVC conduit or PVC to PVC.
- UL and CSA safety listed for greater safety and peace of mind.
Every item checked for quality -
14.37D x 18.7W x 5.12H Above Counter Rectangular Bathroom Vanity Vessel Sink
$81.82 $45.00Flat and smooth surface. Easy for installation and staying clean. Modern, Glaze Glossy, Delicate, and solid ceramic with glaze. Durable & scratch-resistant lifetime use. High Temperature Integral Molding, Seamless, No Leakage. Above the counter installation. Length: 18.70″; Width: 14.37″; Height: 5.12″; Drain Size: 1-3/4″. Vessel sink only (Faucet and drain stopper not included).
Every item checked for quality -
1″ PVC Coupling Male Terminal Adapter
$1.15 $0.63Lightweight yet offers high impact and tensile strength. Chemical resistant to a wide range of acids, alkalis or salt solutions. Corrosion resistant for lower maintenance cost and longer life. PVC is nonconductive eliminating dangerous second point of contact.
- Brand: Kraloy Fittings.
- Part Number: TA10.
- KSCdirect Part: Coup 1.
- Description: 1 Conduit Coup.
Every item checked for quality -
Cash Acme 3/8 in. Compression HG-135 Thermostatic Mixing Valve with Compression Tee
$78.40 $43.12The HG135 is a sleek and compact point of use mixing valve designed to assist in the prevention of scalding. It features a superior, fast acting thermostatic element that provides stable operation at flow rates as low as 0.25 gm (0.95 pm). The Heatguard 135 also reduces the outlet flow to a trickle in the event of a cold water supply failure. The valve inlets and outlet connections are standard 3/8″ supply line compression connections for use with 3/8 in. OD tube. The inlets of the valve feature check valves to prevent cross contamination as well as serviceable strainer screens to prevent the valve from being clogged with dirt or debris. Each valve includes a purpose built mounting bracket and hardware to neatly and securely fasten the valve to the wall. The compact design and pleasant aesthetics allow for this valve to easily be fit under or behind a single basin. Adjustable outlet temperature range: 100°-120°F (38°-49°C).
- Intended for point of use/under sink installations to provide safe outlet water temperature.
- Ideal for individual faucets and electronic faucets.
- ASSE 1070 approved.
- Listed by ASSE, CSA, IAPMO.
- Accurate temperature control with flows as low as 0.25 gpm.
- Robust, low complexity design and total flow shut-off if cold supply fails.
Every item checked for quality -
Johnson Hardware 1060 Soft Close or Soft Open Hardware Kit
$54.45 $29.95The 1060 Soft Close or Soft Open Hardware Kit makes your sliding doors close or open softly and securely. Doors are smoothly braked and pulled into the opened or closed position. The 1060 Soft Close or Soft Open Hardware Kit can be used in the 1500 Series, 1560 Series and 1562 Series Pocket Door Frames, as well as the 100PD and 100SD Bypass Door Hardware and also with the 2610F Wall-Mount Sliding Door Hardware. The 1060 Soft Close or Soft Open Hardware Kit increases the weight capacity of the applicable pocket door hardware, bypass hardware and wall mounted hardware to 200 lbs. Two 1060 Soft Close or Soft Open Hardware Kits used together can create both a soft open as well as soft close.
- Only one 1060 soft close or soft open hardware kit may be used in a 24 in. door application.
- Two 1060 soft close or open hardware kits can be used in doors 28 in. or greater for a soft close and soft open solution.
- 1060 soft close or soft open hardware kit can be used in a new install or retrofitted into LE Johnson pocket door frames, bypass door hardware, or wall-mount sliding door hardware.
- Designed for doors up to 200 lbs.
- 1060 soft close or soft open hardware kit is ADA compliant.
Every item checked for quality -
WIEGMANN Indoor Enclosure 6 in. x 6 in. x 4 in. NEMA 1 Screw Cover/Pull Box
$25.98 $14.29WIEGMANN 6 in. x 6 in. x 4 in. screw cover pull box is made of pre-galvanized steel and designed for indoor locations. The product is ideal for surface mounting or allows runs of conduit for power or communication conductors. Boxes have flat, removable covers fastened with screws. Holes are provided in back for mounting. NEMA 1 enclosures are intended for indoor use, primarily to provide a degree of protection against contact with the enclosed equipment in locations where unusual service conditions do not exist. The enclosures shall meet the rod entry and resistance tests.- Model #SC060604RC.
- Designed for use as wiring boxes and junction boxes.
- Provide a degree of protection against contact with the enclosed equipment.
- ANSI-61 gray polyester powder inside and out.
- Removable concentric knockouts on all four sides.
- Mounting holes provided on back of enclosure.
- Cover easily removed without extracting cover screws.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (3/8 in. O.D.) w/Safety+Plus2 Thermal Excess Flow Valve (33,400 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- The Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Progress Lighting Emblem Collection 5-1/2 in. Slim-Line White Low Profile Integrated LED Surface Flush Mount
$27.27 $15.00
Original Retail Price: $33.00.
The P810016 Edgelit Flush Mount delivers a solution for both residential and commercial markets. The Edgelit technology provides a bright and evenly illuminated surface in a very slim profile. The integrated LED power supply does not protrude into the junction box, allowing for compatibility to 4 in. octagonal, 4 in. round shallow and 4 in. round PVC junction boxes. This surface mounted luminaire measures 11 in. Dia with an overall height of 1 in. In addition, the P810016 is wet location rated, Title 24 JA8 2016 listed, ENERGY STAR listed and is a cost effective solution for fire rated applications (when installed onto a fire rated junction box). The P810016 luminaire combines modern aesthetic, new technology, performance, cost and safety benefits.
- Simple installation to steel mounting plate.
- Light weight polycarbonate luminaire construction.
- Polycarbonate diffuser controls glare and provides an evenly illuminated surface.
- Integrated DC LED power supply capable of flicker-free dimming to 10% brightness with many triac/forward phase dimmers (See dimming notes).
- Can be installed to 4 in. octagonal j-box, 4 x 1/2 in. round shallow j-box and 4 in. round PVC j-box.
- Suitable for use in IC or non-IC applications.
- Meets California title 24 JA8-2016 and is ENERGY STAR listed.
Every item checked for quality
