Showing 208–216 of 260 results
-
BrassCraft Safety+PLUS2 Thermal Excess Flow valve (36,800 BTU) 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector
$27.27 $15.00BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. ID (3/8 in. OD).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Defiant 15 Amp In-Wall 3-Way Daylight Adjusting Digital Timer Switch with Screw Terminals, White
$27.98 $15.39Your switch does the work for you with the Defiant 7-Day In-Wall Digital Timer. By supporting up to seven ON/OFF schedules, the timer is ideal for varied routines. A seven-day cycle allows different schedules based on the day of the week. It provides simple, convenient automation for your hardwired lighting in single-pole or three-way installations. For increased versatility, the timer works with LED, CFL, incandescent and halogen bulbs, which is perfect for porch lighting, ceiling lights, seasonal decor and more. In addition to custom ON/OFF programs, dusk and dawn settings enhance scheduling options. The random feature fluctuates programmed times by up to 30 minutes to create a lived-in appearance. A countdown function automatically turns off lights after a desired period. Built-in self-adjusting technology automatically recognizes the sunrise and sunset times for your region and makes the appropriate adjustment to your lighting settings. The timer features a replaceable door to conceal the buttons and includes white and light almond doors to match your existing rocker-style switches – wallplate not included. It also serves as an ON/OFF switch when closed. Home automation is even more automatic with the Defiant 7-Day In-Wall Digital Timer.
- Self-adjusting technology – Built-in technology automatically adjust lighting times based on sunrise and sunset in your region and accounts for daylight saving time changes.
- Weekly programming – 7-day cycle provides consistent control with the ability to vary schedules based on the day of the week.
- Switch upgrade – Replaces single-pole or three-way switches to control LED, CFL, incandescent and halogen bulbs, and other fixtures – neutral wire required.
- Replaceable door – Convenient door in white and light almond conceals programming buttons and functions as ON/OFF switch.
- Digital display – Large LCD screen offers easy viewing of settings and time.
Every item checked for quality -
QEP 4-1/8 in. Wide Economy Knee Kicker
$45.47 $25.01The Economy Knee Kicker secures carpet during installation and makes it easy to fix loose carpet. This positioning tool is designed for use with low-profile carpet, and features teeth angled forward to help grip and hold the carpet. The teeth are not straight, because this kicker is not intended to pull or stretch carpet to remove wrinkles. The thick foam-filled bumper pad and nonslip, comfort foam grip handle make this knee kicker comfortable to use. It is ideal for small installations, to fix loose carpet, and to use in hallways and closets. Lightweight aluminum and steel construction.
- For small installations and fixing loose carpet.
- Tighten loose carpet like a professional.
- Lightweight aluminum and steel construction.
- Great for hallways and closets.
- Features a soft, foam comfort grip handle.
- Triple nap grip design to hold carpet firmly.
Every item checked for quality -
EcoSmart 65-Watt Equivalent BR30 Dimmable Energy Star LED Light Bulb Soft White (6-Pack)
$19.85 $10.92The EcoSmart BR30 LED soft white is an indoor flood light bulb perfect BR30 shape to fit your indoor recessed cans or track light fixtures. The usual locations that this bulb is installed are kitchen, living room, dinner, office or bedroom. It is a perfect replacement of your traditional incandescent, CFL or Halogen lamps. It only uses 9-Watt and lasts for more than 20-years. The soft white light color creates a relaxing and comfortable environment and is particularly good in living, dinner or bedroom environment.
- Brightness: 650-Lumens.
- Estimated yearly energy cost: $1.08 (based on 3-hours/day, 11/kWh, costs depend on rates and use).
- Life: 22.8-years (based on 3-hours/day).
- Light appearance: 2,700K (soft white).
- Energy used: 9-Watt (equivalent to a 65-Watt standard incandescent light bulb).
- Lumens per watt: 73.
- Uses 86% less energy compared to a standard incandescent light bulb.
- Ideal for use in recessed cans and track light fixtures.
- Fully dimmable with a shadow-free experience, damp locations rated.
- Contains mercury: no.
- Not for use in totally enclosed fixtures.
- Not for use in recessed luminaires.
- Damp location rated.
Every item checked for quality -
HALO 4 in. 2700K-5000K Selectable CCT Surface Integrated LED Downlight Recessed Light with White Round Trim
$24.96 $13.73The Halo Surface LED Downlight (SLD4) is an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. Equipped with 5 color temperature settings ranging from soft (2700K) to daylight (5000K), this SLD4 (4 in.) is designed for installation in many standard and fire-rated 3-1/2 in. and 4 in. round or octagon junction boxes. Supply wire adapater with LED quick wiring connector included. Suitable for residential or commercial installations. Ideal for closets, storage areas, attics and basements.
- Fixture is built to last with maintenance-free energy efficient LEDs with 50,000-hours of life.
- Equipped with 5 color temperature settings ranging from warm (2700K) to daylight (5000K).
- 90 CRI title 24 Compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
- Flexible mounting with included junction box bracket.
- ENERGY STAR qualified for energy conservation and savings up to $400 savings over the life of the ceiling light fixture.
- Can be installed in 3-1/2 in. x 2 in. and 4 in. x 1-1/2 in. junction boxes for new construction, remodel and retrofit applications.
- Compatible with most 4 in. housings.
- Designed for continuous dimming capability to nominally 5% with many 120-Volt Leading Edge (LE) and Trailing Edge (TE) phase control dimmers.
- Wet location, damp location, air-tite, insulation contact rated and can be used with fire-rated ceiling system.
- SLD retrofit kit sold separately.
Every item checked for quality -
Hampton Bay 4 ft. 2400-Watt White Linear Track Lighting Rail Section
$16.96 $9.33The Hampton Bay 4 ft. linear track lighting section is compatible with all Hampton Bay, commercial electric, EC/H series track heads, pendants and components. The 120-Volt track is rated for up to 2,400-Watt and features a 3 bus system. Multiple tracks can be connected together using various couplers (sold separately). The track is cuttable for a customized length. Comes with screws or toggle bolts for solid surface or drop ceiling installations. Versatile and attractive, get creative and design fixtures that will illuminate hard to reach areas. Power feed required (sold separately).
- Durable metal construction is built to last and offers a clean, refined look.
- 120-Volt power rating of up to 2,400-Watt.
- 100 % compatible with all 120-Volt Hampton Bay, commercial electric EC/H series, 3 bus linear track systems, components and accessories.
- For residential and commercial lighting applications.
- Can be surface mounted or drop ceiling mounted (hardware included).
- Ceiling or wall mountable.
- Easy to follow instructions.
Every item checked for quality -
HOME-FLEX 1/2 in. CSST x 1/2 in. FIPT Brass Female Adapter
$10.13 $5.57The HOME-FLEX Female Adapter allows you to quickly affix a CSST system to a gas source. Used to attach CSST directly to Steel Pipe. Can attach CSST either the beginning or end of a CSST system.
- Very high quality brass construction.
- 1/2 in. diameter.
- For use with HOME-FLEX CSST systems.
- For use with natural gas or liquid propane.
- CSA and IAPMO certified.
- Not for use with Home Flex UNDERGROUND poly tubing.
- HOME-FLEX Corrugated Stainless Steel Tubing (CSST) flexible gas piping material must be installed by a qualified installer who has been certified in the use of the HOME-FLEX gas piping system.
- Some areas of the United States do not allow installation of CSST for fuel gas piping systems. It is the installer’s responsibility to check and understand all codes governing the location of installation prior to installing HOME-FLEX CSST.
- CSST is generally for indoor use; however, it can be used outdoors and/or underground with very specific parameters.
Every item checked for quality -
Halex 1/2 in. Electrical Metallic Tube (EMT) Combination Coupling (25-Pack)
$24.87 $13.68The UL and cULus safety listed. 1/2 in. Combination Coupling is a standard fitting that is intended for indoor use. The combination coupling is made of zinc, comes with 3 screws and is compatible with EMT conduit. 3 screws included.
- For indoor use.
- Made of zinc.
- Compatible with EMT conduit.
- Meets UL and cULus requirements.
Every item checked for quality
