Showing 217–225 of 260 results
-
HOME-FLEX 3/4 in. IPS DR 11 Underground Yellow Poly Gas Pipe 90-Degree Elbow
$27.27 $15.00The HOME-FLEX Underground Elbow allows you to safely and easily make a 90 turn. Simply cut the pipe, slide in the provided stiffener and slide into the fitting and tighten down. No special tools necessary.
- HOME-FLEX Underground compression fitting for IPS size MDPE Yellow Poly Gas Pipe. Includes stiffeners.
- Purpose-built for direct burial outside underground use only.
- HOME-FLEX Underground pipe and fittings should NEVER be used in a building and should NEVER be used under a foundation with a structure on it.
- No special tools or equipment required to fit to compatible sized yellow poly gas pipe.
- Easy to understand, straight-forward installation.
- IAPMO UPC certified to ASTM F1924.
- Constructed of durable polypropylene for years of service.
- Rated at 125 psi.
- Can be removed and re-installed.
- NOT for use with HOME-FLEX (or other) CSST (corrugated stainless steel tubing) products.
Every item checked for quality -
WIEGMANN Outdoor Enclosure 6 in. x 6 in. x 4 in. NEMA 3R Screw Cover/Pull Box
$44.27 $24.35WIEGMANN 6 In. x 6 In. x 4 In. rain-proof screw cover box is made of pre-galvanized steel and a gray polyester powder inside and out. It is designed for indoor or outdoor locations. The screw cover box features a drip shield top and smooth seamless sides, front, and back, knockouts are standard in the bottom, no gasket is required, hasp for padlocking and provisions for meter seal are provided. A slip on reversible, removable cover is securely fastened with screws located along the bottom edge and ideal for surface mounting.- Model #RSC060604RC.
- Designed for use as wiring boxes and junction boxes.
- Provide protection in outdoor applications against rain, sleet, and snow, or indoors against dripping water.
- ANSI-61 gray polyester powder inside and out.
- Drip shield top and smooth seamless sides and front.
- Mounting holes provided on back of enclosure.
- Hasp for padlocking or meter seal is provided.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
1-1/4″ PVC Terminal Adapter
$1.67 $0.92TA25 Scepter rigid PVC conduit pipe and fittings are non-sparking and non-conducting, thereby eliminating the most dangerous second point of contact and phase to ground faults. The use of a separate grounding conductor in a Scepter PVC conduit system gives a complete and positive ground for the whole system.
Every item checked for quality -
ROPPE Self-Stick Black 4 in. x 20 ft. x 0.080 in. Vinyl Wall Cove Base Coil
$25.71 $14.14Low cost and good looks highlights Roppe’s Type TV thermoplastic Vinyl base. It’s extremely durable without sacrificing attractiveness, and very economical because it’s made from PVC Vinyl. With its moderate pricing and beautiful color palette, our Vinyl wall base is an outstanding selection four any installation.
- Withstands scratches/scuffs from daily wear.
- Superior durability for indoor commercial or residential use.
- Uniform height helps conceal floor and wall irregularities.
- Ribbed back for easy adhesion.
- Co-extruded top layer resists scuffs and scratches.
- Black in color.
- 20 ft. coil.
Every item checked for quality -
HALO 4 in. 3000K White Integrated LED Recessed Ceiling Light Retrofit Trim Deep Baffle for Low Glare Title 20 Compliant
$27.47 $15.11Halo RL4 Deep Baffle Series consists of a deep regressed baffle retrofit LED Module-Trim for 4 in. aperture recessed housings. The RL4 Deep Baffle Series is designed for use with compatible 4 in. housings: Halo, All-Pro and others. RL4 Deep Baffle Modules produce soft white light and features a deeper regressed baffle for better glare control. For further value the RL4 lens provides uniform illumination and wet location listing. The RL4 die-cast construction makes any housing AIR-TITE, for added HVAC savings and code compliance.
- Title 20 compliant, can be shipped to California locations.
- ENERGY STAR qualified for energy conservation and savings up to $583 savings over the life of the fixture.
- Includes black and white baffle attachments, extra regression for better glare control.
- Fixture is built to last with maintenance-free energy efficient LEDs with 70,000-hours of life (equivalent to 32-year of life at 6-hours per day or 64-year at 3-hours per day), eliminating your need to use and replace bulbs.
- White baffle provides good brightness at 681 Lumens to provide illumination to any room, great for 8 ft. to 10 ft. ceilings.
- Compatible with most 4 in. housings but are best with Halo H995, E4, H99 and H245 series models.
- 90 CRI title 24 compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
- Wet rated, can be used in shower and outdoor light applications.
- Produces light equivalent to a 65-Watt bulb yet uses just 8.5-Watt.
- Designed for continuous dimming down to 5%, standard 120-Volt electronic low-voltage dimmer is recommended for best performance.
- E26 Edison screw base adapter for retrofit into existing incandescent bulb 4 in. housings.
- Mountable using friction blades (included).
- Rated for use with IC and non-IC rated housings.
- 3000K soft white color temperature provides a friendly and inviting atmosphere, works well throughout the house especially in living rooms, bathrooms, hallways and bedrooms.
Every item checked for quality -
Halo HLBSL 4 in. Adjustable CCT Canless IC Rated Dimmable Indoor, Outdoor Integrated LED Recessed Light Kit
$13.87 $7.63Halo HLB4 Selectable Series Downlights are complete 4 in. ultra-thin canless recessed lights designed for use in new construction, remodel and retrofit installation, without needing a housing or j-box. Ultra-slim design goes where LED can lights can’t. Choose your color temperature directly on the fixture. With the flick of a switch, you can choose between 3 color temperatures ranging from warm (3000K) to daylight (5000K) prior to installing into your ceiling. This Halo recessed lighting fixture features an LED driver that offers 120-Volt dimming capability. The HLB4 LED recessed lighting soft lens provides uniform illumination and wet location listing.
- Housing and J-box not required, easy to install spring clips firmly secure recessed LED lights in ceiling.
- Repositionable driver junction box.
- Selectable CCT allows customization to create perfect lighting for your home all throughout your house.
- Choose between 3-discrete color temperature settings ranging from soft (3000K) to daylight (5000K).
- LED recessed lights with attractive round Halo matte white finish and textured lens to provide smooth light distribution.
- LED recessed lights are built to last with maintenance-free energy efficient LED’s, eliminating your need to use and replace bulbs.
- LEDs have 35,000-hours of life, eliminating your need to use and replace bulbs.
- Good brightness at 675 Lumens (at 3000K color temperature) recessed lights provide illumination to any room.
- 90 CRI, title 24 Compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
- Air-tite, wet rated recessed lights can be used in shower and outdoor light applications.
- Designed for continuous dimming down to 5%, standard 120-Volt electronic low-voltage dimmer is recommended for best performance.
- Halo 4 in. LED lights are IC rated, for direct contact with insulation.
- 4 in. recessed lighting produces light equivalent to a 60-Watt bulb yet uses just 12-Watt (see product spec sheet to confirm).
- 1/2 in. D makes this product great for use in shallow ceilings.
- Fits into applications with as little as 3.5 in. plenum clearance.
- ENERGY STAR qualified for energy conservation.
Every item checked for quality -
Wilkins 3/4 in. Lead Free Brass NPT Pressure Relief Valve
$37.40 $20.57The P1000AXL-150C Pressure Relief Valve is set at 150 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.
- Eliminates risk of over-pressure of storage tanks.
- Epoxy-coating adds extra protection.
- Pressure relief valve set at 150 psi.
- CSA Compliance to ANSI Z21.22/CSA 4.4.
- Certified to ASME Section IV by National Board.
- Pressure relief valve settings of 30, 75, 125, and 150 psi offer versatility.
Every item checked for quality
