Showing 226–234 of 260 results
-
Wilkins 3/4 in. Lead Free Brass NPT Pressure Relief Valve
$37.40 $20.57The P1000AXL-150C Pressure Relief Valve is set at 150 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.
- Eliminates risk of over-pressure of storage tanks.
- Epoxy-coating adds extra protection.
- Pressure relief valve set at 150 psi.
- CSA Compliance to ANSI Z21.22/CSA 4.4.
- Certified to ASME Section IV by National Board.
- Pressure relief valve settings of 30, 75, 125, and 150 psi offer versatility.
Every item checked for quality -
Charlotte Pipe 3 in. DWV PVC Double Sanitary Tee
$25.25 $13.89PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems. To be installed with solvent cementing, threading, flanging, and roll-grooved joining. All Charlotte Pipe products are manufactured in the USA.
Every item checked for quality -
Halex 2 in. Rigid 90-Degree Conduit Elbow
$25.20 $13.86The 2 in. 90 degree Conduit Elbow is intended for use to make a 90 degree directional change when installing rigid or intermediate metal conduit (IMC) in indoor or outdoor applications. Large radius for easy wire pulling. CSA- and UL Listed.
- Use to make a 90 degree directional change when installing rigid or IMC conduit.
- Galvanized-steel construction.
- Corrosion resistant.
- For indoor or outdoor use.
Every item checked for quality -
SharkBite Push-to-Connect Faucet Installation Kit
$36.36 $20.00The SharkBite Faucet Installation Kit has everything you need to install your new faucet. The kit includes 2 SharkBite 1/2 in. x 1/4 in. (3/8 in. O.D.) Push-to-Connect Angle Stop Valves, two 5 ft. coils of 1/4 in. PEX Pipe, two 1/4 in. (3/8 in. O.D.) SharkBite x 1/2 in. Swivel Faucet Connectors, and a 1/2 in. Chrome Trim Cover reversed functions as a disconnect and 1/4 in. disconnect clip to remove the pipe from the fitting if needed. The SharkBite Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up under the sink providing a clean, tangle free look. Once the stop valves are installed, thread the 1/2 in. faucet connectors onto the faucet connections and then measure and cut the PEX and push into the outlet on the stop valve and the faucet connector and the installation is complete.
Every item checked for quality -
Orbit 3/4 in. or 1 in. Green Jar Top Valve
$13.96 $7.68Orbit’s Jar Top Valve features an easy-access screw-top lid that makes service a snap. This simple and reliable design includes manual operation and a standard 24-Volt solenoid for connection to an irrigation timer. Orbit’s Inline Valve is designed to prohibit the free flow of water from a ruptured diaphragm and reduces potential water waste and flooding damage. The manual on/off bypass lever is ideal for testing and flushing sprinkler lines. The Inline Valve works with standard residential 24-Volt sprinkler systems.
- Threaded easy-access jar-top lid design for easy serviceability.
- Heavy-duty construction with stainless steel components provides years of reliable service.
- Compatible with standard 24-Volt sprinkler systems.
- Manual on/off bleed screw for testing and flushing sprinkler systems.
- Work on 3/4 or 1 sprinkler systems.
- For outdoor use only.
- For cold water use only.
- For irrigation use only.
- Dependable design.
- Made of durable, long lasting materials.
Every item checked for quality -
American Standard Children’s Round Open Front Toilet Seat in White
$44.64 $24.55EverClean antimicrobial surface inhibits the growth of stain- and odor-causing bacteria, mold, and mildew on the surface.
- Model # 5001G055.020.
- For Baby Devoro bowls 2315.228 and 2282.001.
- Open front toilet seat less cover.
- Injection molded solid polypropylene.
- Plastic material.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (71,100 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCrafts stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality -
SKILSAW TRUEHVL 48-Volt Lithium-Ion 5.0 Ah Battery
$249.98 $137.49TRUEHVL is the only battery technology that cuts it with Worm Drive. TRUEHVL is designed specifically to power Worm Drive and delivers the performance and power you demand. Patented Stay Cool technology wraps each cell with a temperature controlling material that keeps cells cool and provides better performance. Our intelligent power management system monitors and optimizes each cell. An innovative battery design evenly distributes heat to extend run time. Together, these technological advances create a battery that’s powerful enough for our legendary Worm Drive. The next generation of Worm Drive power is here.
- Stay cool battery technology wraps each cell in a temperature controlling material that keeps cells cool and delivers better performance.
- Innovative battery design arranges cells in a unique configuration that evenly distributes heat to extend run time.
- Our intelligent power management system maximizes power and performance by monitoring and optimizing each cell.
- Compatible with all SKILSAW TRUEHVL tools and chargers.
- Battery specifications: 48-Volt, 5.0 Ah, 240 Wh.
- TRUEHVL quick charger sold separately.
Every item checked for quality -
Leviton 54504-2i Ivory Framed Four Way Toggle Light Switch 15a
$16.76 $9.22Leviton’s Commercial Grade switches are designed to offer outstanding reliability and top performance in commercial settings. Ideal applications include municipal facilities government buildings malls department stores hospital and health care facilities office buildings schools colleges universities houses of worship and cultural institutions.
Every item checked for quality
