Showing 226–234 of 260 results
-
Troy-Bilt Original Equipment Drive Belt for Select Troy-Bilt 21 in. Mowers and Select Snow Throwers OE 954-04260, 754-04260
$24.98 $13.74Troy-Bilt belts are designed and tested to consistently meet original equipment performance standards. Specially engineered tension and compression materials are used to resist wear and provide optimum strength and performance. For the best cutting performance, routinely inspect belts and replace when they show signs of wear. To protect your investment, specify and use only Troy-Bilt parts.
- Original equipment part for drive belts starting with 954-04260 and 754-04260.
- Belt fits Troy-Bilt 21 in. walk-behind mowers and 2-stage snow throwers.
- Factory tested and approved to provide the perfect fit, strength, durability and performance.
- Oil, heat and dirt resistant material provides superior durability.
- Made of Kevlar material to withstand continuous bending around pulleys.
- Uniform alignment of cords allows for even distribution for wear to maximize performance.
- For detailed installation instructions, please refer to your instruction manual.
Every item checked for quality -
EcoSmart 120-Watt Equivalent PAR38 CEC Motion Sensor Flood LED Light Bulb Bright White (2-Pack)
$21.09 $11.60The EcoSmart LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 25 ft. range and keeps lights on for 1-minute after the last detected movement. The sensor detection angle is 100. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.
- Radar motion sensor 25 ft. detection range.
- 100° detection angle.
- Daylight sensor keeps daytime motion from triggering the lights.
- Easily deactivate sensors to allow for constant 24/7 bulb operation.
- Switch lights ON for normal motion sensor mode.
- Switch OFF, then back ON (within 3-seconds) for always-on, 24/7 operation.
- Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
- 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
- 1200 Lumens each bulb.
- Not for use with existing motion sensor fixtures.
- Light appearance: 3,000K (bright white).
- California Energy Commission Title 20 Compliant LED Light Bulb.
Every item checked for quality -
#11, STRM006BN, Brushed Nickel Spiraled Single Lever Pull-Down Kitchen Faucet
$100.00 $55.00- Model: Star Mini Spring Pull Out Kitchen Mixer – STRM006BN.
- Function: Single Lever Pull-Down Kitchen Mixer/Faucet.
- Configuration: Single-Hole Installation.
- Finish: Brushed Nickel.
- Brand: Modern National.
- Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
- Installation Instructions are Included.
Every item checked for quality -
Charlotte Pipe 3 in. PVC DWV No Hub Adapter
$7.62 $4.19PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140°F. PVC is lightweight and easy to install. They require no special tools for cutting, and can be installed with solvent cementing, threading, flanging, and roll-grooved joining.
Every item checked for quality -
Split Basin Faucet with Drain Stopper in Matte Black
$136.36 $75.00This KES bathroom sink faucet is NSF and cUPC certified, compliant with no-lead requirements and California (CEC) Standards. In addition, this KES matte black bathroom faucet is made with no-lead 18/8 stainless steel for safe drinking water. Water safety is our priority! This bathroom faucet also features a high-quality finish passing a rigorous salt spray test for superior corrosion resistance, rustproof and scratch resistance.
Every item checked for quality -
Cap A Tread Bennett Valley Oak/Kettle Hill Oak 47in.Lx12.15in.Wx2.28in.T Vinyl Stair Tread and Reversible Riser Kit Adhesive
$66.96 $36.83Cap A Tread is a durable, seamless stair tread cover that is easily glued down over your existing stair treads. Use Cap A Tread to renew your stairs in a day to a fresh new look! Coordinates with many vinyl and laminate plank flooring colors.
- Buy the correct size for your existing treads: 1.69 in. Thick Cap A Tread will cover existing stair treads up to 1.3 in. thick; 2.28 in. Thick Cap A Tread will cover existing stair treads up to 1.9 in. thick.
- Cap A Tread adds character to your stairs, product visuals are designed to closely coordinate with flooring as there may be slight color and texture variation.
- Durable, seamless cover laminated over MDF.
- Coordinates with many flooring types and thicknesses, including vinyl and laminate plank flooring.
- Easy glue down installation to coordinate stairs with your floor.
- Designed to coordinate with many flooring colors, or can be used as a standalone retrofit for an existing stair finish, such as carpet.
- Allows the customer to achieve a great new look that is affordable.
- Cap A Tread fits over existing treads without having to modify them.
- Simply cut to fit and glue over the existing stair tread.
- For residential and light commercial use; interior use only.
- Easy to clean with just a damp cloth.
- Tread and riser kit includes a reversible riser that is white on one side and matching color on the other.
- Proudly manufactured by Zamma Corporation.
- Use only urethane based adhesive to install Cap-A-Tread.
Every item checked for quality -
HDX 600 Lumens Integrated LED Clamplight
$19.98 $10.99This 600 Lumens Integrated LED Clamplight presents a unique ultra-thin design that is compact and convenient to use in different sites, such as the garage or workroom. Supplying with the separate magnetic metal base to have 4-in-1 function which makes it to be a hanging lamp, hand-Held work lamp, table lamp or magnetic lamp freely according to different demands. This light is built with the LED integrated, ensuring long-lasting and energy-efficient illumination.
- High power SMD LED with 600 Lumens light output.
- Ultra-thin panel for saving freight, store shelves and storage places.
- With metal base, 4-in-1 function: hanging lamp, hand-held work lamp, table lamp and magnetic lamp.
- Ball joint for easy positioning.
- SPT-2-8/2 in. 5 ft. cord.
- Energy saving durable on/off power switch.
- Full metal clamp with scratch-resistant vinyl sleeve.
- Frosted lens decreases glare and provides softer and even light distribution for user-friendly.
- Heavy duty structure.
Every item checked for quality -
Toro TimeCutter SS 50 in. Deck Belt
$59.38 $32.66This is a Kevlar corded aramid fiber belt. Genuine Toro parts ensure your Toro mower performs as it’s intended by providing the perfect fit and maximum performance. This belt fits 50 in. TimeCutters model years 2011 and newer.
- Replacement deck drive belt for use on 50 in. TimeCutter manufactured in 2011 and later.
- Same as part # 119-8820.
- Kevlar corded aramid fiber belt for superior durability.
- Genuine Toro part.
Every item checked for quality
