Showing 226–234 of 260 results
-
2 in. Rigid Metal Conduit (RMC) Water Tight Conduit Hub
$21.40 $11.77Topaz’s Water Tight Conduit Hub with Insulated Throats are used to secure or terminate threaded conduit to an unthreaded opening in a box or metal enclosure where a rain-tight, oil-tight or dust-tight connection is required. Insulated throat insulates conductors, prevents abrasion and thinning of conductor insulation, and reduces wire pull effort. Oversized locknut protects against damage from vibrations and promotes positive grounding. The threaded portion of the hub positions into a knockout and is locked in place with a locknut. Once in place, conduit can be threaded onto the hub. Hubs form a watertight seal, making them ideal for indoor and outdoor applications, including service entrance applications. All malleable construction ensures mechanical protection. Zinc-electroplated for added corrosion protection.
- Sold as: Single unit.
- Trade Size: 2 in.
- Insulated throat.
- Recessed neoprene O-ring assures rain-tight, oil-tight, or dust-tight connections.
- Assembled with 150° rated insulator.
- Oversized locknut provides vibration-proof.
- Wet or Dry Locations.
- Primary Material: Zinc Die Cast.
Every item checked for quality -
FloorMuffler 100 sq. ft. 4 ft. x 25 ft. x 0.04 in. Premium Underlayment for Vinyl Plank Flooring
$79.00 $43.45It’s what’s underneath that counts! FloorMuffler Encore is a high-performance acoustical underlayment for most vinyl plank and rigid core floor coverings with or without a pre-attached pad. As a premium grade underlayment, FloorMuffler Encore uses its closed-cell polypropylene foam construction and UltraSeal self-sealing lip and tape system to form a moisture barrier. FloorMuffler Encore is designed for floating floor installations and is the ideal underlayment for both residential and commercial projects.
- FOR PRE ATTACHED PAD FLOORS: For use with most vinyl plank and rigid core floor coverings with or without pre attached pad.
- ACOUSTICAL PERFORMANCE: Highest acoustic ratings on the market: HIIC up to 76, IIC up to 69 dB, STC up to 62 dB, Delta IIC up to 22 dB.
- MOISTURE PROTECTION: All-in-one moisture barrier means no additional films required. UltraSeal lip & tape system joins rolls at the seams to ensure moisture protection.
- LONG TERM PROTECTION: Superior compression characteristics help to ensure the integrity of your floor’s tongue and groove system. Check out the Third Party Verification Test Report in the Additional Resources section.
- ECO-FRIENDLY: Surpasses the indoor air quality emissions requirement for California’s Section 01350-the most stringent volatile organic compound (VOC) emissions standard in North America. Mold and Mildew Resistant.
- FLOORSCORE CERTIFIED.
- AROUND THE GLOBE: FloorMuffler has become the industry’s most trusted brand of underlayments with millions of square feet installed in residential and commercial applications around the world.
- INNOVATION is at the core of what we do. FloorMuffler Encore brings improved performance to attached pad flooring systems.
Every item checked for quality -
BrassCraft 1/2 in. Nominal Push Connect x 1/2 in. FIP x 20 in. SpeediOne Braided Faucet Connector and 1/4-Turn Straight Valve
$3.64 $2.00Original Retail Price: $17.75.
BrassCraft’s push connect one-piece water supply combines their trusted brass water valve with their flexible braided polymer connector for one quick easy-to-install solution. BrassCraft’s one-piece connection features push connect technology on the valve inlet and a hand-tighten wing nut on the outlet to provide a significant savings in installation time and cost. Push connect valve inlet requires no special tools to install and comes equipped with a pre-inserted tube stiffener to make the product ideal for copper, PEX and CPVC piping systems. The braided polymer fibers of the connector are designed to bend freely without kinking or crimping in tight quarters and resist corrosion caused by chemicals found in common household, tile and glass cleaners. In addition, its reinforced inner hose resists corrosion under harsh water conditions.
- 1-piece unit combines valve and supply line.
- Saves time with one less connection.
- No special installation tools required.
- Installation ready with pre-inserted tube stiffener.
- Fast, reliable and secure.
- Compatible with copper, PEX and CPVC.
- Remove with combination removal tool or 5/8 in. open end wrench.
- Connector bends freely without kinking or crimping in tight quarters.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality -
14.37D x 18.7W x 5.12H Above Counter Rectangular Bathroom Vanity Vessel Sink
$81.82 $45.00Flat and smooth surface. Easy for installation and staying clean. Modern, Glaze Glossy, Delicate, and solid ceramic with glaze. Durable & scratch-resistant lifetime use. High Temperature Integral Molding, Seamless, No Leakage. Above the counter installation. Length: 18.70″; Width: 14.37″; Height: 5.12″; Drain Size: 1-3/4″. Vessel sink only (Faucet and drain stopper not included).
Every item checked for quality -
Orbit 1 in. FPT Auto Inline Valve
$15.96 $8.78Designed and optimized for trouble-free operation, Orbit’s Heavy Duty 1 in. In-Line Sprinkler Valve combines the latest in innovation to create a workhorse valve for residential sprinkler systems. Soft-close design reduces water hammer and wear on the system. Reverse flow fail-safe design prevents flooding. Captured lid screws and solenoid plunger, and attached diaphragm spring make maintenance easy and simple. Replaces all major brands of sprinkler valves. For use with outdoor cold water irrigation systems.
- Lid screws will work with flat head or Philips screwdriver, as well as a 5/16 socket.
- Spring attaches to diaphragm to reduce the chances of losing it.
- Captured plunger solenoid.
- Diaphragm post for easy realignment.
- 1 in. female-threaded valve.
- Inline valve works with standard residential 24-Volt sprinkler systems.
- For outdoor use with cold water only.
- For irrigation applications only.
- Compatible with all 24V systems.
- Soft-close design reduces water hammer.
Every item checked for quality -
Husky 1-1/2 in. Quick-Release Telescoping Basin Wrench
$19.98 $10.99Husky s Quick Release Telescoping Plumbing Basin Wrench is ideal for tightening and removing faucet and fill valve nuts. It features a versatile multi-position telescoping range of 12-1/2 in. up to 19 in. for hard to reach valves. It also features an extra-large spring-loaded jaw with a capacity of 3/8 in. up to 1-1/2 in.…
Every item checked for quality -
BrassCraft 1/2 in. Nom Push Connect x 7/8 in. Ballcock x 12 in. SpeediOne Braided Toilet Connector and 1/4-Turn Straight Valve
$3.64 $2.00
Original Retail Price: $17.75.
BrassCraft has created an easy-to-install, one-piece connection. By combining our trusted bass supply stops with our dependable braided, vinyl and stainless steel connector – the results is a quick and easy installation. One-piece connectors are available in a wide variety of options for faucet, toilet and dishwasher applications.
- Connector is constructed with flexible braided polymer; stop is chrome plated brass.
- 1/2 in. nominal push connect x 1/2 in. FIP.
- No special installation tools required.
- Use in hot or cold water applications.
- Durable, flexible water connector requires no cutting or soldering during installation.
- Compatible with copper, PEX, and CPVC.
- Remove with combination removal tool or 5/8 in. open end wrench.
- Connector bends freely without kinking or crimping in tight quarters.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality -
Charlotte Pipe 3 in. PVC DWV No Hub Adapter
$7.62 $4.19PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140°F. PVC is lightweight and easy to install. They require no special tools for cutting, and can be installed with solvent cementing, threading, flanging, and roll-grooved joining.
Every item checked for quality -
Halex #2 ACC Conduit Hanger (25-Pack)
$16.98 $9.34The #2 Conduit and Pipe Hangers are designed to secure and suspend 1 in. Rigid or EMT conduits to overhead supports. It is made of zinc-plated steel and resists corrosion. Intended for inside or outdoor use.
- Secure and suspend 1 in. rigid and EMT conduits from overhead supports.
- Zinc-plated steel resists corrosion.
- Compatible with 1 in. conduit.
- UL and CSA safety listings.
- For indoor or outdoor applications.
- Bolt has a square neck for easy assembly.
Every item checked for quality
