Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
  2. Shop
    3. Page 28

Showing 244–252 of 260 results

Filters

  • Charlotte Pipe 3 in. DWV PVC Double Sanitary Tee

    PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems. To be installed with solvent cementing, threading, flanging, and roll-grooved joining. All Charlotte Pipe products are manufactured in the USA.

    Green checkmark of qualityEvery item checked for quality
    $25.25 $13.89

  • WIEGMANN Indoor Enclosure 6 in. x 6 in. x 4 in. NEMA 1 Screw Cover/Pull Box

    WIEGMANN 6 in. x 6 in. x 4 in. screw cover pull box is made of pre-galvanized steel and designed for indoor locations. The product is ideal for surface mounting or allows runs of conduit for power or communication conductors. Boxes have flat, removable covers fastened with screws. Holes are provided in back for mounting. NEMA 1 enclosures are intended for indoor use, primarily to provide a degree of protection against contact with the enclosed equipment in locations where unusual service conditions do not exist. The enclosures shall meet the rod entry and resistance tests.
    • Model #SC060604RC.
    • Designed for use as wiring boxes and junction boxes.
    • Provide a degree of protection against contact with the enclosed equipment.
    • ANSI-61 gray polyester powder inside and out.
    • Removable concentric knockouts on all four sides.
    • Mounting holes provided on back of enclosure.
    • Cover easily removed without extracting cover screws.
    Green checkmark of qualityEvery item checked for quality
    $25.98 $14.29

  • Hampton Bay Kenmont 4 ft. 4-Light Brushed Nickel Integrated LED Wave Fixed Track Lighting Kit

    This 4-light fixed track offers a modern style in a brushed nickel finish. The unique design of the movable head gives an immaculate LED light output. The stylish design will add a sophisticated look to any home.

    • Brushed nickel finish for corrosion resistance.
    • Integrated 3000K warm white LED, no bulbs to replace.
    • Adjustable lamp heads to direct light.
    • Only uses 12-Watt of power.
    • Light output of 1600 Lumens.
    • Dimmable.
    • 120-Volt.
    Green checkmark of qualityEvery item checked for quality
    $159.00 $87.45

  • NIBCO 4 in. x 2 in. PVC DWV Spigot x Hub Flush Bushing

    The NIBCO 4 in. x 2 in. PVC DWV Spigot x Hub Flush Bushing can be inserted into a PVC sitting hub to reduce the hub to a smaller pipe size. The bushing is designed for use with drain, waste and vent piping systems. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

    Green checkmark of qualityEvery item checked for quality
    $7.67 $4.22

  • 24 in. W x 22 in. D x 36.4 in. H Bathroom Vanity in Grey with Marble Stone Vanity Top in White with Single White Sink

    Complete your bathroom renovation with this vanity set. It’s made from 100% solid wood in grey paint finish. The surface is made from marble with a backsplash that protects your walls from spills and splashes. It also accommodates a big rectangular ceramic basin in a white finish. The soft-closing drawer and doors allow you to store an assortment of bathroom essentials. This vanity ensures both form and function in your bathroom or powder room for you and your guests.

    • Vanity was crafted from solid wood and grey color paint finish, it is arranged with one drawer and two doors which offer usable effortless storage.
    • White marble countertop – this top includes backsplash, 1-undermount porcelain sink, 3-pre-drilled holes for widespread faucets.
    • Sliders are concealed soft-close function, ideal for your bathroom as it prevents any slamming noises.
    • Included: cabinet, top, basin, backsplash, hardware.
    • Not included: faucet and mirror.
    • Brushed Nickel finish for handles.
    • Factory assembled base cabinet of the vanity has an easy installation.
    Green checkmark of qualityEvery item checked for quality
    $600.00 $330.00

  • KODO 120-Watt Equivalent PAR38 LED Motion Sensor Flood Light Bulb Bright White (2-Pack)

    The KODO LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 35 ft. range and keeps lights on for 5 minutes after the last detected movement. The sensor detection angle is 100°. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.

    • Radar motion sensor up to 35 ft. turns on lights for 5-minutes.
    • 100° detection angle.
    • Daylight sensor keeps daytime motion from triggering the lights.
    • Easily deactivate sensors to allow for constant 24/7 bulb operation.
    • Switch lights ON for normal motion sensor mode.
    • Switch OFF, then back ON (within 3-seconds) for always-on, 24/7 operation.
    • Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
    • 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
    • 1200 Lumens each bulb.
    • Not for use with existing motion sensor fixtures.
    • Light appearance: 3,000K (bright white).
    Green checkmark of qualityEvery item checked for quality
    $19.87 $10.93

  • SunTouch Floor Warming 8 ft. x 30 in. 120-Volt Radiant Floor Heating Mat (Covers 20 sq. ft.)

    This 120 volt 8 foot x 30 inch SunTouch floor warming mat adds comfort and a touch of luxury to a home. This ultra-thin, low-profile system installs beneath tile, stone and even vinyl or laminate flooring. It’s ideal for remodeling bathrooms and kitchens and offers an upscale option when designing new construction. It is energy efficient as well as inexpensive to operate. Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels and it is UL listed for safety.

    • Energy efficient, inexpensive to operate.
    • Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels.
    • Single point power connection makes layout and wiring a snap.
    • Armored power lead, wire straight to the electrical box, no conduit required.
    • Armored power lead wire straight to the electrical box, no conduit required.
    • Single-point power connection to facilitate layout and wiring.
    • Mats can be connected in parallel for larger floor surfaces.
    • Can be combined with a thermostat control (not included).
    Green checkmark of qualityEvery item checked for quality
    $239.00 $131.45

  • Cap A Tread Bennett Valley Oak/Kettle Hill Oak 47in.Lx12.15in.Wx2.28in.T Vinyl Stair Tread and Reversible Riser Kit Adhesive

    Cap A Tread is a durable, seamless stair tread cover that is easily glued down over your existing stair treads. Use Cap A Tread to renew your stairs in a day to a fresh new look! Coordinates with many vinyl and laminate plank flooring colors.

    • Buy the correct size for your existing treads: 1.69 in. Thick Cap A Tread will cover existing stair treads up to 1.3 in. thick; 2.28 in. Thick Cap A Tread will cover existing stair treads up to 1.9 in. thick.
    • Cap A Tread adds character to your stairs, product visuals are designed to closely coordinate with flooring as there may be slight color and texture variation.
    • Durable, seamless cover laminated over MDF.
    • Coordinates with many flooring types and thicknesses, including vinyl and laminate plank flooring.
    • Easy glue down installation to coordinate stairs with your floor.
    • Designed to coordinate with many flooring colors, or can be used as a standalone retrofit for an existing stair finish, such as carpet.
    • Allows the customer to achieve a great new look that is affordable.
    • Cap A Tread fits over existing treads without having to modify them.
    • Simply cut to fit and glue over the existing stair tread.
    • For residential and light commercial use; interior use only.
    • Easy to clean with just a damp cloth.
    • Tread and riser kit includes a reversible riser that is white on one side and matching color on the other.
    • Proudly manufactured by Zamma Corporation.
    • Use only urethane based adhesive to install Cap-A-Tread.
    Green checkmark of qualityEvery item checked for quality
    $66.96 $36.83

  • RYOBI Rotary Tool Smooth Flame Material Removal Burr (For Wood, Plastic, Fiberglass and Drywall)

    Introducing the Rotary Tool Smooth Flame Material Removal Burr. For smooth flowing, concave and v-shaped cuts, this burr offers 4X more material removal than the standard burr. Proudly made in the USA. This accessory offers universal fitment and is compatible with any rotary tool including Dremel. Expand your hobby and maker capabilities with this RYOBI accessory.

    • For Smooth Flowing, Concave, and V-Shaped Cuts.
    • For use on wood, plastic, fiberglass, and drwyall.
    • 4X More Material Removed Than Standard Burr.
    • 1/8 in. Shank.
    • 35,000 Max RPM.
    • USA Made.
    Green checkmark of qualityEvery item checked for quality
    $19.96 $10.98
X