Showing 244–252 of 260 results
-
BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)
$27.27 $15.00BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. ID (3/8 in. OD).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Brondell CleanSpa Enhanced Hand-Held Bidet
$54.98 $30.24The Brondell CleanSpa Enhanced Hand Held Bidet provides an affordable and easy way to upgrade your health and hygiene. The CleanSpa Enhanced Bidet Sprayer can be DIY installed in minutes by connecting to your toilets clean water supply line and it features enhanced total control thumb controlled water pressure adjustment. A metal T-valve with brass core allows additional water pressure adjustment and acts as a shutoff mechanism after each use along with a flexible metal spiral bidet hose with patented inner woven core. Only parts of the highest quality are used and all necessary parts for standard installation are included. Start achieving a more complete clean today.
Every item checked for quality -
2 in. Rigid Metal Conduit (RMC) Water Tight Conduit Hub
$21.40 $11.77Topaz’s Water Tight Conduit Hub with Insulated Throats are used to secure or terminate threaded conduit to an unthreaded opening in a box or metal enclosure where a rain-tight, oil-tight or dust-tight connection is required. Insulated throat insulates conductors, prevents abrasion and thinning of conductor insulation, and reduces wire pull effort. Oversized locknut protects against damage from vibrations and promotes positive grounding. The threaded portion of the hub positions into a knockout and is locked in place with a locknut. Once in place, conduit can be threaded onto the hub. Hubs form a watertight seal, making them ideal for indoor and outdoor applications, including service entrance applications. All malleable construction ensures mechanical protection. Zinc-electroplated for added corrosion protection.
- Sold as: Single unit.
- Trade Size: 2 in.
- Insulated throat.
- Recessed neoprene O-ring assures rain-tight, oil-tight, or dust-tight connections.
- Assembled with 150° rated insulator.
- Oversized locknut provides vibration-proof.
- Wet or Dry Locations.
- Primary Material: Zinc Die Cast.
Every item checked for quality -
Toro TimeCutter SS 50 in. Deck Belt
$59.38 $32.66This is a Kevlar corded aramid fiber belt. Genuine Toro parts ensure your Toro mower performs as it’s intended by providing the perfect fit and maximum performance. This belt fits 50 in. TimeCutters model years 2011 and newer.
- Replacement deck drive belt for use on 50 in. TimeCutter manufactured in 2011 and later.
- Same as part # 119-8820.
- Kevlar corded aramid fiber belt for superior durability.
- Genuine Toro part.
Every item checked for quality -
#63, BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. OD Push Connect Outlet 1/4-Turn Straight Valve
$5.45 $3.00BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. OD Push Connect Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.
- Original retail price: $10.46.
- 1-piece body construction provides strength, durability and long-lasting performance.
- 1/2 in. nominal push connect x 3/8 in. OD push connect.
- Compatible with copper, PEX or CPVC tubing.
- For use in potable water distribution systems, not intended for recirculating water systems that produce continuous use temperatures above 115°F for those applications, use our KT series ball stops.
- Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
- 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
- Easy-to-remove handle protects against accidental operation during rough-ins.
- Installation ready: requires no special tools, soldering to glue for a watertight seal.
Every item checked for quality -
Apollo 1 in. PEX-A Expansion Sleeve/Ring (25-Pack)
$16.38 $9.01The Apollo ExpansionPEX 1 in. PEX-A Expansion Sleeve (25-Pack) is simple to install. Apollo ExpansionPEX are produced using PEX-A material. Apollo ExpansionPEX are required to create a secure Apollo ExpansionPEX connection. Apollo ExpansionPEX Expansion Sleeves are engineered with a bevel along the leading edge to ease pipe insertion and an integrated stop to ensure proper placement of the sleeve. The Apollo ExpansionPEX system is a comprehensive cold expansion piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Designed for use with Apollo ExpansionPEX fittings and pipe and is compatible with all expansion type (ASTM F1960) systems.
- Designed for use with 1 in. PEX-A pipe and 1 in. PEX-A barb fittings.
- Pro pack includes 25 sleeves.
- Requires expansion tool (sold separately) for use.
- For use exclusively with PEX-A (ASTM F1960) pipe and systems.
- Meets or exceeds ASTM F1960 and ASTM F877 standards.
- Meets UPC, IPC and cUPC standard.
- Rated to 200F and 200 psi.
Every item checked for quality -
RYOBI Rotary Tool Smooth Flame Material Removal Burr (For Wood, Plastic, Fiberglass and Drywall)
$19.96 $10.98Introducing the Rotary Tool Smooth Flame Material Removal Burr. For smooth flowing, concave and v-shaped cuts, this burr offers 4X more material removal than the standard burr. Proudly made in the USA. This accessory offers universal fitment and is compatible with any rotary tool including Dremel. Expand your hobby and maker capabilities with this RYOBI accessory.
- For Smooth Flowing, Concave, and V-Shaped Cuts.
- For use on wood, plastic, fiberglass, and drwyall.
- 4X More Material Removed Than Standard Burr.
- 1/8 in. Shank.
- 35,000 Max RPM.
- USA Made.
Every item checked for quality -
PEX-a Expansion Tool (Tool-Only)
$99.98 $54.99The Apollo ExpansionPEX Expansion Tool is a bare tool without expander heads. When combined with Apollo ExpansionPEX Expander Heads, the tool provides consistent and reliable expansion of Apollo ExpansionPEX tubing. The Apollo ExpansionPEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed…
Every item checked for quality -
Wired 16VAC/30VA Doorbell Transformer, Compatible with all Video Doorbells
$19.96 $10.98This Defiant Branded Wired 30VA Doorbell Transformer is ideal for new construction or replacement. It features a Low-Voltage wired design that is perfect for most wired doorbell installations. This 30VA transformer is compatible with smart video doorbells, Wi-Fi smart devices and more. ETL Certified to guarantee safety and quality.
Every item checked for quality
