Showing 253–260 of 260 results
-
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (71,100 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCrafts stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality -
FitRite 21 in. x 15 in. Backflow Valve Cover
$27.47 $15.11The FitRite Insulated Backflow/RP Cover ensures you’re ready for the cold weather. 21 in. in length, the 2-1/4 in. in width and 15 in. in height is spacious enough to cover your valve and secure it there for the Winter. The valve cover is a sleek black and is for use as an irrigation system accessory.
- Backflow valve cover.
- Irrigation system accessory.
- 21 in. length, 2-1/4 in. width, 15 in. height.
- Black color.
- Easy installation, installs in seconds.
- Extends your watering season.
- Fits most backflow assemblies.
- Durable weatherproof material, UV and cold resistant.
- Allows backflow devices to function properly.
- Made for virtually all brands of PVB’s and RP’s.
Every item checked for quality -
Greenworks PRO 60V Dual Port Turbo Charger
$137.00 $75.35Our 6.0 Amp hour (Ah) battery charger is designed to charge all Greenworks 60-Volt tools. Charges includes a diagnostic LED indicator communicating current charge level, battery temperature and indicate battery issues.
- Simultaneously charges 2 batteries.
- Compatible with all Greenworks 60-Volt batteries.
- Can be used bench top or mounted on the wall.
Every item checked for quality -
Steel City 2-Gang New Work Square Device Electrical Wall Box (Case of 10)
$65.29 $35.91Mount electrical switches and receptacles to wood or metal wall studs with the 2-Gang Square Device Wall Box. This wall box can be used in indoor and outdoor residential and commercial applications. It offers welded construction with 3/4 in. and 1/2 in. eccentric knockouts and ground bump.
- Model # 2G4D1234-10R.
- Use to mount electrical switches and receptacles to wood or metal wall studs with 3/8 in. offset.
- Zinc-galvanized steel is rust- and corrosion resistant.
- Compatible with electrical conduit wiring in indoor/outdoor residential and commercial applications.
- UL Listed.
- 17 knockouts for use with 1/2 in. and 3/4 in. connections.
Every item checked for quality -
KODO 120-Watt Equivalent PAR38 LED Motion Sensor Flood Light Bulb Bright White (2-Pack)
$19.87 $10.93The KODO LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 35 ft. range and keeps lights on for 5 minutes after the last detected movement. The sensor detection angle is 100°. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.
- Radar motion sensor up to 35 ft. turns on lights for 5-minutes.
- 100° detection angle.
- Daylight sensor keeps daytime motion from triggering the lights.
- Easily deactivate sensors to allow for constant 24/7 bulb operation.
- Switch lights ON for normal motion sensor mode.
- Switch OFF, then back ON (within 3-seconds) for always-on, 24/7 operation.
- Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
- 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
- 1200 Lumens each bulb.
- Not for use with existing motion sensor fixtures.
- Light appearance: 3,000K (bright white).
Every item checked for quality -
Home Decorators Collection 1.5 in. W x 2 in. H Titanium Cube Decorative Shelf Bracket
$13.98 $7.69The Titanium Cube Decorative Shelf Brackets (2-Pack) are adjustable to fit thicknesses of up to 1/2 in. The brackets feature steel construction with a titanium finish. The Cube bracket, when properly installed, will support up to 22 lbs. per pair.
- Titanium finish.
- Steel construction.
- Use to support decorative wall shelving (sold separately).
- Supports up to 22 lbs. per pair when properly installed.
- Adjustable to fit shelf thicknesses of up to 1/2 in.
Every item checked for quality -
Cap A Tread Bennett Valley Oak/Kettle Hill Oak 47in.Lx12.15in.Wx2.28in.T Vinyl Stair Tread and Reversible Riser Kit Adhesive
$66.96 $36.83Cap A Tread is a durable, seamless stair tread cover that is easily glued down over your existing stair treads. Use Cap A Tread to renew your stairs in a day to a fresh new look! Coordinates with many vinyl and laminate plank flooring colors.
- Buy the correct size for your existing treads: 1.69 in. Thick Cap A Tread will cover existing stair treads up to 1.3 in. thick; 2.28 in. Thick Cap A Tread will cover existing stair treads up to 1.9 in. thick.
- Cap A Tread adds character to your stairs, product visuals are designed to closely coordinate with flooring as there may be slight color and texture variation.
- Durable, seamless cover laminated over MDF.
- Coordinates with many flooring types and thicknesses, including vinyl and laminate plank flooring.
- Easy glue down installation to coordinate stairs with your floor.
- Designed to coordinate with many flooring colors, or can be used as a standalone retrofit for an existing stair finish, such as carpet.
- Allows the customer to achieve a great new look that is affordable.
- Cap A Tread fits over existing treads without having to modify them.
- Simply cut to fit and glue over the existing stair tread.
- For residential and light commercial use; interior use only.
- Easy to clean with just a damp cloth.
- Tread and riser kit includes a reversible riser that is white on one side and matching color on the other.
- Proudly manufactured by Zamma Corporation.
- Use only urethane based adhesive to install Cap-A-Tread.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (60,500 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality
