Showing 19–27 of 260 results
-
BrassCraft Safety+PLUS2 Thermal Excess Flow valve (36,800 BTU) 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector
$27.27 $15.00BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. ID (3/8 in. OD).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
24 in. W x 22 in. D x 36.4 in. H Bathroom Vanity in Grey with Marble Stone Vanity Top in White with Single White Sink
$600.00 $330.00Complete your bathroom renovation with this vanity set. It’s made from 100% solid wood in grey paint finish. The surface is made from marble with a backsplash that protects your walls from spills and splashes. It also accommodates a big rectangular ceramic basin in a white finish. The soft-closing drawer and doors allow you to store an assortment of bathroom essentials. This vanity ensures both form and function in your bathroom or powder room for you and your guests.
- Vanity was crafted from solid wood and grey color paint finish, it is arranged with one drawer and two doors which offer usable effortless storage.
- White marble countertop – this top includes backsplash, 1-undermount porcelain sink, 3-pre-drilled holes for widespread faucets.
- Sliders are concealed soft-close function, ideal for your bathroom as it prevents any slamming noises.
- Included: cabinet, top, basin, backsplash, hardware.
- Not included: faucet and mirror.
- Brushed Nickel finish for handles.
- Factory assembled base cabinet of the vanity has an easy installation.
Every item checked for quality -
HALO 4 in. 2700K-5000K Selectable CCT Surface Integrated LED Downlight Recessed Light with White Round Trim
$24.96 $13.73The Halo Surface LED Downlight (SLD4) is an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. Equipped with 5 color temperature settings ranging from soft (2700K) to daylight (5000K), this SLD4 (4 in.) is designed for installation in many standard and fire-rated 3-1/2 in. and 4 in. round or octagon junction boxes. Supply wire adapater with LED quick wiring connector included. Suitable for residential or commercial installations. Ideal for closets, storage areas, attics and basements.
- Fixture is built to last with maintenance-free energy efficient LEDs with 50,000-hours of life.
- Equipped with 5 color temperature settings ranging from warm (2700K) to daylight (5000K).
- 90 CRI title 24 Compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
- Flexible mounting with included junction box bracket.
- ENERGY STAR qualified for energy conservation and savings up to $400 savings over the life of the ceiling light fixture.
- Can be installed in 3-1/2 in. x 2 in. and 4 in. x 1-1/2 in. junction boxes for new construction, remodel and retrofit applications.
- Compatible with most 4 in. housings.
- Designed for continuous dimming capability to nominally 5% with many 120-Volt Leading Edge (LE) and Trailing Edge (TE) phase control dimmers.
- Wet location, damp location, air-tite, insulation contact rated and can be used with fire-rated ceiling system.
- SLD retrofit kit sold separately.
Every item checked for quality -
#5, BrassCraft 1/2 in. FIP Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve
$5.45 $3.00
Gain control of your household plumbing fixtures with this BrassCraft 1/2 in. FIP Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve. Stop the water flow with the 90 degree water handle design and you can perform maintenance and repair without shutting off the water to the entire home. he straight valve is most often used where the water pipe enters the room from the floor.
- Compatible with iron pipe.
- Smooth on/off flow control with a quarter turn (90°) turn of the handle.
- Smooth on/off flow control with a quarter turn (90°) turn of the handle.
- Easy to install.
- 1-piece body construction for strength, durability and long-lasting performance.
- Chrome-plated brass.
- Temperature rating: 40° to 160°F.
- Pressure rating: 125 psi maximum.
- No-lead certified.
- IAPMO and CSA listed to ASME A112,18,1/CSA B125,1.
Every item checked for quality -
Halex 1 in. Electrical Metallic Tube Set-Screw Connectors (20-Pack)
$25.60 $14.08Choose Halex 1 in. EMT Set-Screw Connectors (10-Pack) to fix EMT conduit to steel outlet boxes, load centers or other metal enclosures. Install these galvanized connectors indoors or in concrete-tight settings. This set-screw connector meets UL and CSA requirements.
- Connects EMT conduit to a steel outlet box, load center or other metal enclosure.
- Galvanized steel resists corrosion.
- CSA and UL safety listings.
- For indoor use or in concrete-tight applications when taped.
Every item checked for quality -
Halex 3/4 in. Electrical Metallic Tube (EMT) Conduit Drive Straps (150-Pack)
$24.78 $13.63Quickly install EMT on wood or masonry with Halex 3/4 in. EMT Conduit Drive Straps (150-Pack). These zinc-plated straps can be used for outdoor jobs. They have a flat design.
- Secures EMT conduit to a wood or masonry surface.
- Zinc-plated steel resists corrosion.
- UL and CSA listed.
- For indoor or outdoor applications.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector (1/2 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (85,000 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality -
ROPPE Self-Stick Black 4 in. x 20 ft. x 0.080 in. Vinyl Wall Cove Base Coil
$25.71 $14.14Low cost and good looks highlights Roppe’s Type TV thermoplastic Vinyl base. It’s extremely durable without sacrificing attractiveness, and very economical because it’s made from PVC Vinyl. With its moderate pricing and beautiful color palette, our Vinyl wall base is an outstanding selection four any installation.
- Withstands scratches/scuffs from daily wear.
- Superior durability for indoor commercial or residential use.
- Uniform height helps conceal floor and wall irregularities.
- Ribbed back for easy adhesion.
- Co-extruded top layer resists scuffs and scratches.
- Black in color.
- 20 ft. coil.
Every item checked for quality
