Showing 28–36 of 260 results
-
Halex 1/2 in. Electrical Metallic Tube (EMT) Drive Straps (200-Pack)
$29.64 $16.30When EMT conduit must be installed on wood or masonry, turn to the Halex 1/2 in. EMT Drive Straps (200-Pack). These zinc-plated straps are for indoor and outdoor use. They have a flat design.
- Secure EMT conduit to wood or masonry surfaces.
- Zinc-plated steel resists corrosion.
- UL and CSA safety listings.
- For indoor or outdoor applications.
Every item checked for quality -
EcoSmart 120-Watt Equivalent PAR38 CEC Motion Sensor Flood LED Light Bulb Bright White (2-Pack)
$21.09 $11.60The EcoSmart LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 25 ft. range and keeps lights on for 1-minute after the last detected movement. The sensor detection angle is 100. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.
- Radar motion sensor 25 ft. detection range.
- 100° detection angle.
- Daylight sensor keeps daytime motion from triggering the lights.
- Easily deactivate sensors to allow for constant 24/7 bulb operation.
- Switch lights ON for normal motion sensor mode.
- Switch OFF, then back ON (within 3-seconds) for always-on, 24/7 operation.
- Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
- 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
- 1200 Lumens each bulb.
- Not for use with existing motion sensor fixtures.
- Light appearance: 3,000K (bright white).
- California Energy Commission Title 20 Compliant LED Light Bulb.
Every item checked for quality -
BrassCraft Safety+PLUS2 Thermal Excess Flow valve (36,800 BTU) 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector
$27.27 $15.00BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. ID (3/8 in. OD).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Hampton Bay Alexandria 17.3 in. White Farmhouse 180-Degree Motion Sensor Outdoor 1-Light Wall Sconce
$89.96 $49.48Illuminate your outdoor area with the classic look of the Alexandria 180° Outdoor Motion Sensing Decorative Lamp. The white finish and beveled glass will perfectly match your home to provide a beautiful lighting appeal. The 180° motion sensor provides added safety and security around the perimeter of your home. The DualBrite technology allows your lantern to attractively accent the look of your home by coming on at a lower light level for your selected duration of 3 hours, 6 hours, or from dusk till dawn. DualBrite provides energy savings with 2 level lighting modes. Weather resistant for a long service life.
- DualBrite technology allows the light to come on half bright, to accent your home for a selected time after dusk (off, 3 hour, 6 hour, until dawn), selecting off disables this feature, the motion sensing features will continue to work as described, if motion is sensed, the light turns on full bright for the on-time (1, 5, or 10 minutes) then returns to dim mode.
- Durable weather-resistant metal housing and finish.
- 180° motion sensor ensures reliable activation when motion is detected, range of up to 30 ft.
- UL listed for wet locations.
- Accepts medium base-bulb, sold separately (100-Watt maximum).
- Wall-mount design can be easily installed to illuminate porches or other outdoor walled spaces making it perfect for front porches, garage fronts, or back porches/patio areas.
- Photocell keeps the light off during daylight hours, and the manual over ride feature allows the light to easily be kept on for outdoor events such as backyard parties.
- Operating temperature range: -25°C (-13°F) to +50°C (+120°F).
Every item checked for quality -
2 in. Bolt-On Hub for Electrical Panels/Load Centers with B Openings
$20.47 $11.26Bolt-On Hub, along with its elongated mounting holes, reduces the need for costly conduit offsets and bends while allowing for easy and quick adjustments. The Square D by Schneider Electric 2 in. Hub is for use in Square D load centers, CSED devices and safety switches. This hub is a Type B size and is UL and CSA safety listed.
- For use in Square D load centers, CSED devices and safety switches.
- Can be used for outdoor load centers and safety switches.
- UL and CSA listed.
- Type B size.
- ANSI certified.
Every item checked for quality -
RYOBI Rotary Tool Coarse Flame Material Removal Burr (For Wood, Plastic, Fiberglass and Drywall)
$20.96 $11.53Introducing the Rotary Tool Coarse Flame Material Removal Burr. This burr is ideal for aggressive flowing, concave and v-shaped cuts and offers 11X more material removal than standard burrs. Proudly made in the USA. This accessory offers universal fitment and is compatible with any rotary tool including Dremel. Expand your hobby and maker capabilities with this RYOBI accessory.
- For Aggressive Flowing, Concave, and V-Shaped Cuts.
- For use on wood, plastic, fiberglass, and drwyall.
- 11X More Material Removed Than Standard Burr.
- 1/8 in. Shank.
- 35,000 Max RPM.
- USA Made.
Every item checked for quality -
Home Decorators Collection Hayley Multi 2 ft. x 3 ft. Geometric Scatter Area Rug
$23.40 $12.87Modern transitional design meets a palette of comfortably sophisticated shades of soft blue, deep red, sage and spice. Textured blocks add warmth and coziness to any space. The rich color palette and geometric pattern offer incredible beauty without being overwhelming.
- Plaid print embodies a relaxing feel.
- Stain-resistant design keeps it free of blemishes.
- Polypropylene backing will hold it securely in place.
- Multi-colored tone adds a welcoming and mood-elevating hint of color to your decor.
- Measures 0.32 in. in thickness.
- Actual Dimensions: 3 ft. x 1 ft. 10 in.
- Curling may occur at corners and edges after unpacking, so it is recommended to use Rug Grippers or Adhesive Tabs to fix flatness. You can also improve flatness by reverse rolling and letting sit for 24 hours, working curled edges out by bending them in opposite direction, or applying books (weight) on the areas of concern.
Every item checked for quality -
interhasa! Electric Hand Dryer for Commercial Bathrooms
$329.00 $180.95- UPDATED 3rd GENERATION HAND DRYER — This updated Jet hand dryer uses a more powerful main board, thinner cover design, lower noise, and lower power consumption technology. High quality ABS Material and updated structure ensures the product’s life time. Its elegant design makes it a premium decor for all commercial bathrooms.
- HIGH SPEED HAND DRYER – Double-sided Jet design with ultra high speed. 1800 Watts 95m/s air dryer, fast drying within 5-7 seconds, 3 times faster than compact hand dryers. Its speedy dry time and highly refined design creates a refreshing lifestyle and better customer experience in a high traffic area.
- HEPA FILTER – This bathroom hand dryer with built-in high quality HEPA filter is more hygienic. It cleans the air and provides absolutely pure air flow. The detachable air filters can also prevent dust from entering the machine, which also can promise the long life of the air hand dryer.
- LOWER NOISE & ENERGY CONSUMPTION – This electric hand dryer dries hands in less than 7 Seconds using 80% less energy than Normal warm Hand Dryer. Largely saves Electricity and Costs less to run. The best Hand Drying alternative for any environment with 70% smaller carbon footprint than Paper Towels.
- WALL MOUNTED & EASY INSTALLATION – With a modern and sleek design, this jet hand dryer is suitable for public school, hospital, star hotels, airports, shopping malls, restaurant, and other consistently high-traffic restrooms.
Every item checked for quality -
ClosetMaid SuperSlide 6.3 mm. Preloaded Back Wall Clips (48-Pack)
$14.47 $7.96The ClosetMaid Preloaded Back Wall Clips (48-Pack) help you anchor wire shelving to a drywall. Constructed from strong plastic, these clips install easily with the included push pins. Install easily with push pins (included).
- For use as part of the ClosetMaid fixed mount system.
- Should be spaced no further than 12 in. apart.
- Made of strong plastic.
- Install easily with push pins (included).
Every item checked for quality
