Showing 37–45 of 260 results
-
InSinkErator Indulge Modern Series 1-Handle 9.25 in. Faucet for Instant Hot Water Dispenser in Matte Black
$454.69 $250.08This InSinkErator Indulge Modern Instant Hot Water Dispenser for use with our Stainless Steel Tank (sold separately) model provides filtered 200F near-boiling water for a variety of uses. The InSinkErator Modern instant hot water dispenser is perfect for any cooking connoisseur. The Indulge Modern instant hot water dispenser features stunning clean lines, blending efficiency and style. Designed for use with the re-engineered InSinkErator Stainless Steel Tank and Filtration System, enjoy hot, filtered water right when you need it – now.
- Compatible with InSinkErator Stainless Steel Hot Water Dispenser Tanks & Filtration Systems (sold separately).
- Graceful, high-arch swivel spout makes filling pots & pitchers quick and easy.
- Durable brass faucet dispenses near-boiling water up to 200°F.
- Hot water lever automatically shuts off when not in use.
- For use with the InSinkErator stainless steel tank and filtration system (sold separately).
Every item checked for quality -
SharkBite Push-to-Connect Faucet Installation Kit
$36.36 $20.00The SharkBite Faucet Installation Kit has everything you need to install your new faucet. The kit includes 2 SharkBite 1/2 in. x 1/4 in. (3/8 in. O.D.) Push-to-Connect Angle Stop Valves, two 5 ft. coils of 1/4 in. PEX Pipe, two 1/4 in. (3/8 in. O.D.) SharkBite x 1/2 in. Swivel Faucet Connectors, and a 1/2 in. Chrome Trim Cover reversed functions as a disconnect and 1/4 in. disconnect clip to remove the pipe from the fitting if needed. The SharkBite Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up under the sink providing a clean, tangle free look. Once the stop valves are installed, thread the 1/2 in. faucet connectors onto the faucet connections and then measure and cut the PEX and push into the outlet on the stop valve and the faucet connector and the installation is complete.
Every item checked for quality -
Cash Acme 3/8 in. Compression HG-135 Thermostatic Mixing Valve with Compression Tee
$78.40 $43.12The HG135 is a sleek and compact point of use mixing valve designed to assist in the prevention of scalding. It features a superior, fast acting thermostatic element that provides stable operation at flow rates as low as 0.25 gm (0.95 pm). The Heatguard 135 also reduces the outlet flow to a trickle in the event of a cold water supply failure. The valve inlets and outlet connections are standard 3/8″ supply line compression connections for use with 3/8 in. OD tube. The inlets of the valve feature check valves to prevent cross contamination as well as serviceable strainer screens to prevent the valve from being clogged with dirt or debris. Each valve includes a purpose built mounting bracket and hardware to neatly and securely fasten the valve to the wall. The compact design and pleasant aesthetics allow for this valve to easily be fit under or behind a single basin. Adjustable outlet temperature range: 100°-120°F (38°-49°C).
- Intended for point of use/under sink installations to provide safe outlet water temperature.
- Ideal for individual faucets and electronic faucets.
- ASSE 1070 approved.
- Listed by ASSE, CSA, IAPMO.
- Accurate temperature control with flows as low as 0.25 gpm.
- Robust, low complexity design and total flow shut-off if cold supply fails.
Every item checked for quality -
HALO 4 in. 2700K-5000K Selectable CCT Surface Integrated LED Downlight Recessed Light with White Round Trim
$24.96 $13.73The Halo Surface LED Downlight (SLD4) is an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. Equipped with 5 color temperature settings ranging from soft (2700K) to daylight (5000K), this SLD4 (4 in.) is designed for installation in many standard and fire-rated 3-1/2 in. and 4 in. round or octagon junction boxes. Supply wire adapater with LED quick wiring connector included. Suitable for residential or commercial installations. Ideal for closets, storage areas, attics and basements.
- Fixture is built to last with maintenance-free energy efficient LEDs with 50,000-hours of life.
- Equipped with 5 color temperature settings ranging from warm (2700K) to daylight (5000K).
- 90 CRI title 24 Compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
- Flexible mounting with included junction box bracket.
- ENERGY STAR qualified for energy conservation and savings up to $400 savings over the life of the ceiling light fixture.
- Can be installed in 3-1/2 in. x 2 in. and 4 in. x 1-1/2 in. junction boxes for new construction, remodel and retrofit applications.
- Compatible with most 4 in. housings.
- Designed for continuous dimming capability to nominally 5% with many 120-Volt Leading Edge (LE) and Trailing Edge (TE) phase control dimmers.
- Wet location, damp location, air-tite, insulation contact rated and can be used with fire-rated ceiling system.
- SLD retrofit kit sold separately.
Every item checked for quality -
Squared, 4-inch Single Handle Bathroom Faucet in Chrome
$90.91 $50.00- Model: A-DIL001 – Dillion Basin Mixer.
- Function: Single Lever Bathroom Mixer/Faucet.
- Configuration: Single-Hole Installation.
- Finish: Chrome.
- Dimensions: 175 mm H x 156 mm D (6.889 in. H x 6.141 in. D)
- Brand: Modern National.
- Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
Every item checked for quality -
Clopay Garage Door Rear Track Hanger Kit
$25.98 $14.29The Clopay Rear Track Hanger Kit allows for garage door track to be securely mounted to your garage ceiling. It comes as a kit with all the parts you need to assemble the rear track hanger. Works on most residential applications.
- Can be used on garages with up to 2 ft. of headroom.
- Galvanized construction for durable and long lasting performance.
- Pre punched holes allow easy attachment to ceilings with various joist spacings.
- Durable and long lasting.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
EcoSmart 16.4 ft. Smart RGBWIC Dynamic Color Changing Dimmable Plug-In LED Strip Light Powered by Hubspace
$29.98 $16.49This Plug-In 16 ft. LED RGBWIC Tunable White Tape Light with Hubspace is the perfect lighting solution for any indoor or outdoor application. Select from a wide spectrum of colors, including a tunable White. Includes dozens of pre-programmed light settings and modes. Also pairs to Amazon Alexa and Google Assistant.
- Setup in under 60 seconds to Wi-Fi or Bluetooth via Hubspace app.
- Tunable white LEDs from 2700K to 5000K.
- RGBWIC and tunable white LEDs for limitless possibilities of colors and whites.
- Dozens of preset modes including music sync.
- Long lasting: with a long-lasting LED, you can use this night light for years to come.
- Customize color, brightness, and set schedules with Hubspace app.
- Remote control included for easy color and preset selections.
- Independent segment control- Allows for multiple colors, in various designs, on one strip.
- Perfect lighting solution for indoor or outdoor use.
- Maintenance-free- no bulb replacement.
Every item checked for quality -
Delta Universal Seats and Springs Repair Kit
$5.98 $3.29Repair leaks in your bathroom or kitchen faucet with the Delta Universal Seats and Springs Repair Kit. The kit is compatible with Delta faucets that have stainless-steel ball valves (faucets and ball valves not included).
- Use in Delta faucets with stainless-steel ball valves (faucets and ball valves not included).
- Repairs leaks in kitchen faucets.
- Can be used to repair leaks in bath faucets.
- Includes 1 set of seats and springs.
- Genuine Delta repair kit.
Every item checked for quality
