Showing 37–45 of 260 results
-
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
American Standard Commercial Elongated Open Front Toilet Seat Less Cover in White
$23.00 $12.65Add the latest look to your bathroom with this American Standard seat. It features a sleek, clean look that complements most bathroom styles. A patented EverClean surface inhibits the growth of bacteria, mold and mildew and helps keep your seat sanitary.
- Solid polypropylene plastic construction.
- Open front.
- Without cover.
- With check hinge.
- Stainless steel check hinge.
- EverClean surface inhibits the growth of stain and odor causing bacteria, mold and mildew on the surface.
Every item checked for quality -
RUGPADUSA Essentials 8 ft. x 10 ft. Hard Surface 100% Felt 1/4 in. Thickness Rug Pad
$58.95 $32.42If you’re looking for some cushion under your rugs that won’t break the bank, RUGPADUSA Essentials is for you. These felt rug pads are 1/4 in. thick 100% recycled fiber. They add comfort underfoot and help with noise reduction on rugs that don’t require a non-slip pad. Our pads are manufactured and made to withstand heavy traffic while protecting your rugs and your floors. We stock Essentials in the most common sizes for rugs, and they can easily be modified with a pair of household scissors.
- 100% felt padding buffers foot traffic, traps dirt, and prolongs the life of rugs and floor surfaces.
- Needle-punched felt made.
- Dense, thick felt provides cushion underfoot.
- Will not strip, discolor, or damage any floor surfaces.
- Made with 100% pre-consumer, recycled fibers for long lasting comfort and durability.
- Low VOC emissions keep your family safe from harmful irritants.
Every item checked for quality -
#26, BrassCraft 1/2 in. Compression Inlet x 3/8 in. Compression Outlet Straight Valve
$5.45 $3.00
BrassCraft 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet 1/4 in. Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.
- Compatible with copper or PEX (PEX installations require a stainless steel tube insert).
- Smooth, quarter-turn operation, ON/OFF flow control with a 90° turn of the handle.
- 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
- Easy-to-remove handle protects against accidental operation during rough-ins.
- 1-piece body construction for strength, durability and long-lasting performance.
- Chrome-plated brass.
- Temperature rating: 40°F to 160°F.
- Pressure rating: 125 psi maximum.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality -
WIEGMANN Indoor Enclosure 6 in. x 6 in. x 4 in. NEMA 1 Screw Cover/Pull Box
$25.98 $14.29WIEGMANN 6 in. x 6 in. x 4 in. screw cover pull box is made of pre-galvanized steel and designed for indoor locations. The product is ideal for surface mounting or allows runs of conduit for power or communication conductors. Boxes have flat, removable covers fastened with screws. Holes are provided in back for mounting. NEMA 1 enclosures are intended for indoor use, primarily to provide a degree of protection against contact with the enclosed equipment in locations where unusual service conditions do not exist. The enclosures shall meet the rod entry and resistance tests.- Model #SC060604RC.
- Designed for use as wiring boxes and junction boxes.
- Provide a degree of protection against contact with the enclosed equipment.
- ANSI-61 gray polyester powder inside and out.
- Removable concentric knockouts on all four sides.
- Mounting holes provided on back of enclosure.
- Cover easily removed without extracting cover screws.
Every item checked for quality -
Kawasaki Original Equipment Kawasaki Air Filter for Kawasaki FR and FS Series Engines, OE# 11013-0752, 11013-7049, 1103-7047
$21.98 $12.09Kawasaki air filters have been tested in punishing conditions to ensure consistent performance year-round. The precision fit maintains original engine efficiency and performance. The filters provide higher dirt capture capability resulting in less engine maintenance over time.
- For Kawasaki Engines.
- Fits DEWALT Zero-Turn Mower models X548 and X554.
- Original equipment part for air filters 11013-7052, 11013-7049, 1103-7047, 99999-0384, KM-11013-7049, KM-11013-7052 and KM-11013-7047.
- Contents include one air filter.
- Factory tested and approved to provide the perfect fit, strength, durability and performance.
- Kawasaki Air Filters provide superior filtration with low-flow restriction. They are built for long life and help to protect your engine.
- Filters are designed by engineers using high-quality materials for superior dust-holding capacity.
- Filters trap and hold damaging particles effectively ensuring less engine maintenance over time.
- For detailed installation instructions, please refer to your instruction manual.
Every item checked for quality
