Showing 37–45 of 260 results

Filters
  • WIEGMANN Outdoor Enclosure 6 in. x 6 in. x 4 in. NEMA 3R Screw Cover/Pull Box

    WIEGMANN 6 In. x 6 In. x 4 In. rain-proof screw cover box is made of pre-galvanized steel and a gray polyester powder inside and out. It is designed for indoor or outdoor locations. The screw cover box features a drip shield top and smooth seamless sides, front, and back, knockouts are standard in the bottom, no gasket is required, hasp for padlocking and provisions for meter seal are provided. A slip on reversible, removable cover is securely fastened with screws located along the bottom edge and ideal for surface mounting.
    • Model #RSC060604RC.
    • Designed for use as wiring boxes and junction boxes.
    • Provide protection in outdoor applications against rain, sleet, and snow, or indoors against dripping water.
    • ANSI-61 gray polyester powder inside and out.
    • Drip shield top and smooth seamless sides and front.
    • Mounting holes provided on back of enclosure.
    • Hasp for padlocking or meter seal is provided.
    Green checkmark of qualityEvery item checked for quality
    $44.27 $24.35
  • WIEGMANN Indoor Enclosure 6 in. x 6 in. x 4 in. NEMA 1 Screw Cover/Pull Box

    WIEGMANN 6 in. x 6 in. x 4 in. screw cover pull box is made of pre-galvanized steel and designed for indoor locations. The product is ideal for surface mounting or allows runs of conduit for power or communication conductors. Boxes have flat, removable covers fastened with screws. Holes are provided in back for mounting. NEMA 1 enclosures are intended for indoor use, primarily to provide a degree of protection against contact with the enclosed equipment in locations where unusual service conditions do not exist. The enclosures shall meet the rod entry and resistance tests.
    • Model #SC060604RC.
    • Designed for use as wiring boxes and junction boxes.
    • Provide a degree of protection against contact with the enclosed equipment.
    • ANSI-61 gray polyester powder inside and out.
    • Removable concentric knockouts on all four sides.
    • Mounting holes provided on back of enclosure.
    • Cover easily removed without extracting cover screws.
    Green checkmark of qualityEvery item checked for quality
    $25.98 $14.29
  • Lyndall Single Towel Hook in Brushed Nickel

    Features Sub Brand: Lyndall; Product Type: Robe Hook; Assembled Height: 8 in. ; Finish: Satin Nickel; Material: Die Cast Zinc; Number of Hooks: 1; .

    Green checkmark of qualityEvery item checked for quality
    $14.55 $8.00
  • American Standard Children’s Round Open Front Toilet Seat in White

    EverClean antimicrobial surface inhibits the growth of stain- and odor-causing bacteria, mold, and mildew on the surface.

    • Model # 5001G055.020.
    • For Baby Devoro bowls 2315.228 and 2282.001.
    • Open front toilet seat less cover.
    • Injection molded solid polypropylene.
    • Plastic material.
    Green checkmark of qualityEvery item checked for quality
    $44.64 $24.55
  • #26, BrassCraft 1/2 in. Compression Inlet x 3/8 in. Compression Outlet Straight Valve

    BrassCraft 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet 1/4 in. Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

    • Compatible with copper or PEX (PEX installations require a stainless steel tube insert).
    • Smooth, quarter-turn operation, ON/OFF flow control with a 90° turn of the handle.
    • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • 1-piece body construction for strength, durability and long-lasting performance.
    • Chrome-plated brass.
    • Temperature rating: 40°F to 160°F.
    • Pressure rating: 125 psi maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00
  • Intermatic 40 Amp 60-Minute Indoor Wall Mounted Mechanical Water Heater Timer, Steel, Gray

    With the easy-to-set Yellow Dial, these time switches allow for basic control of electric water heaters. These time switches offer a minimum ON/OFF time of 1-hour and are available for 208-250 VAC applications. With the proven reliability of our mechanical line, these time switches provide dependable electric water heater control.

    • 2-sets of on/off trippers.
    • Enables shifting electricity use into off-peak hours to reduce energy costs.
    • Convenient external override switch.
    • Up to 12 on/12 pff events with the purchase of additional trippers (156T1978A).
    • Metal indoor enclosure.
    Green checkmark of qualityEvery item checked for quality
    $77.11 $42.41
  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. I.D. (3/8 in. O.D.).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00
  • 2 in. Center Stop PVC Coupling Conduit Fitting

    Elevate your electrical installations with this Center Stop Coupling, an essential component crafted to deliver exceptional performance and reliability. This electrical conduit fitting is engineered from premium-grade PVC material to ensure robustness and longevity. Its innovative design features a center stop mechanism that facilitates precise alignment and seamless connection between conduits, simplifying installation processes and reducing downtime on the job site. Our PVC coupling is ideal for a wide range of applications, both indoors and outdoors. It provides a dependable solution for residential, commercial, and industrial electrical projects. Its corrosion-resistant properties make it suitable for use in diverse environments, from damp basements to exposed outdoor installations, ensuring longevity and reliability in any condition. Our PVC coupling meets and exceeds expectations in the electrical industry. You can use it to upgrade existing infrastructure or start a new installation.

    • 2 in. standard center stop coupling is used to join lengths of conduit pipe together with 2 solvent weld socket ends.
    • Electrical conduit fitting is designed for use with schedule 40 and 80 conduits and may also be used with EB and DB duct applications.
    • Durable non-conductive PVC coupling won’t rust or corrode.
    • Our PVC coupling is UL-listed and resistant to a wide range of chemicals, acids, and salts.
    • It’s non-conductive, sunlight-resistant, and designed for use aboveground and underground.
    Green checkmark of qualityEvery item checked for quality
    $1.80 $0.99
X