Showing 46–54 of 260 results
-
Steel City 2-Gang New Work Square Device Electrical Wall Box (Case of 10)
$65.29 $35.91Mount electrical switches and receptacles to wood or metal wall studs with the 2-Gang Square Device Wall Box. This wall box can be used in indoor and outdoor residential and commercial applications. It offers welded construction with 3/4 in. and 1/2 in. eccentric knockouts and ground bump.
- Model # 2G4D1234-10R.
- Use to mount electrical switches and receptacles to wood or metal wall studs with 3/8 in. offset.
- Zinc-galvanized steel is rust- and corrosion resistant.
- Compatible with electrical conduit wiring in indoor/outdoor residential and commercial applications.
- UL Listed.
- 17 knockouts for use with 1/2 in. and 3/4 in. connections.
Every item checked for quality -
HDX 600 Lumens Integrated LED Clamplight
$19.98 $10.99This 600 Lumens Integrated LED Clamplight presents a unique ultra-thin design that is compact and convenient to use in different sites, such as the garage or workroom. Supplying with the separate magnetic metal base to have 4-in-1 function which makes it to be a hanging lamp, hand-Held work lamp, table lamp or magnetic lamp freely according to different demands. This light is built with the LED integrated, ensuring long-lasting and energy-efficient illumination.
- High power SMD LED with 600 Lumens light output.
- Ultra-thin panel for saving freight, store shelves and storage places.
- With metal base, 4-in-1 function: hanging lamp, hand-held work lamp, table lamp and magnetic lamp.
- Ball joint for easy positioning.
- SPT-2-8/2 in. 5 ft. cord.
- Energy saving durable on/off power switch.
- Full metal clamp with scratch-resistant vinyl sleeve.
- Frosted lens decreases glare and provides softer and even light distribution for user-friendly.
- Heavy duty structure.
Every item checked for quality -
Greenworks PRO 60V Dual Port Turbo Charger
$137.00 $75.35Our 6.0 Amp hour (Ah) battery charger is designed to charge all Greenworks 60-Volt tools. Charges includes a diagnostic LED indicator communicating current charge level, battery temperature and indicate battery issues.
- Simultaneously charges 2 batteries.
- Compatible with all Greenworks 60-Volt batteries.
- Can be used bench top or mounted on the wall.
Every item checked for quality -
HALO 4 in. 2700K-5000K Selectable CCT Surface Integrated LED Downlight Recessed Light with White Round Trim
$24.96 $13.73The Halo Surface LED Downlight (SLD4) is an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. Equipped with 5 color temperature settings ranging from soft (2700K) to daylight (5000K), this SLD4 (4 in.) is designed for installation in many standard and fire-rated 3-1/2 in. and 4 in. round or octagon junction boxes. Supply wire adapater with LED quick wiring connector included. Suitable for residential or commercial installations. Ideal for closets, storage areas, attics and basements.
- Fixture is built to last with maintenance-free energy efficient LEDs with 50,000-hours of life.
- Equipped with 5 color temperature settings ranging from warm (2700K) to daylight (5000K).
- 90 CRI title 24 Compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
- Flexible mounting with included junction box bracket.
- ENERGY STAR qualified for energy conservation and savings up to $400 savings over the life of the ceiling light fixture.
- Can be installed in 3-1/2 in. x 2 in. and 4 in. x 1-1/2 in. junction boxes for new construction, remodel and retrofit applications.
- Compatible with most 4 in. housings.
- Designed for continuous dimming capability to nominally 5% with many 120-Volt Leading Edge (LE) and Trailing Edge (TE) phase control dimmers.
- Wet location, damp location, air-tite, insulation contact rated and can be used with fire-rated ceiling system.
- SLD retrofit kit sold separately.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)
$27.27 $15.00BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. ID (3/8 in. OD).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Progress Lighting Emblem Collection 5-1/2 in. Slim-Line White Low Profile Integrated LED Surface Flush Mount
$27.27 $15.00
Original Retail Price: $33.00.
The P810016 Edgelit Flush Mount delivers a solution for both residential and commercial markets. The Edgelit technology provides a bright and evenly illuminated surface in a very slim profile. The integrated LED power supply does not protrude into the junction box, allowing for compatibility to 4 in. octagonal, 4 in. round shallow and 4 in. round PVC junction boxes. This surface mounted luminaire measures 11 in. Dia with an overall height of 1 in. In addition, the P810016 is wet location rated, Title 24 JA8 2016 listed, ENERGY STAR listed and is a cost effective solution for fire rated applications (when installed onto a fire rated junction box). The P810016 luminaire combines modern aesthetic, new technology, performance, cost and safety benefits.
- Simple installation to steel mounting plate.
- Light weight polycarbonate luminaire construction.
- Polycarbonate diffuser controls glare and provides an evenly illuminated surface.
- Integrated DC LED power supply capable of flicker-free dimming to 10% brightness with many triac/forward phase dimmers (See dimming notes).
- Can be installed to 4 in. octagonal j-box, 4 x 1/2 in. round shallow j-box and 4 in. round PVC j-box.
- Suitable for use in IC or non-IC applications.
- Meets California title 24 JA8-2016 and is ENERGY STAR listed.
Every item checked for quality -
14.37D x 18.7W x 5.12H Above Counter Rectangular Bathroom Vanity Vessel Sink
$81.82 $45.00Flat and smooth surface. Easy for installation and staying clean. Modern, Glaze Glossy, Delicate, and solid ceramic with glaze. Durable & scratch-resistant lifetime use. High Temperature Integral Molding, Seamless, No Leakage. Above the counter installation. Length: 18.70″; Width: 14.37″; Height: 5.12″; Drain Size: 1-3/4″. Vessel sink only (Faucet and drain stopper not included).
Every item checked for quality -
Venti Air 24 in. x 24 in. T-Bar Drop ceiling Lay in Supply diffuser with round 14 in. collar/neck
$67.13 $36.923 cone air diffuser is for T-Bar, Drop Down, Lay in ceilings. 2-1/2 in. high grooved collar makes installation easier and faster. Optional damper sits in the groove.
- Distance between the cones is adjustable and works well with variable air flow patterns.
- Surface mounted or suspended grid system installation.
- Made of steel and white powder coated for durability and smooth glossy finish.
- If need the white color is easy to paint over.
- Outside dimensions are 23.75 in. x 23.75 in.
- California residents see Prop 65 WARNINGS.
Every item checked for quality -
Rino-Tuff Universal Fit Weight Absorbing Flex Trimmer Strap for Grass String Trimmer, Blower or Sprayer
$14.96 $8.23The Universal Flex Strap by Rino-Tuff is a comfortable bungee trimmer strap with an adjustable shoulder pad that distributes weight evenly over your back and legs. The quick connecting clip makes it easy to attach the strap to any trimmer, blower, or sprayer. The clip houses a built-in trimmer line cutter and a slot with ear plugs. The bungee strap helps extend your reach while the thick shoulder pad absorbs the shock felt while trimming. With less weight on your body, you can trim for a longer amount of time and reduce muscle fatigue. That means cutting more with less strain to get the job done faster, leaving you more time to do the things you want.
- Fits all trimmers, blowers, and sprayers.
- Reduces strain and muscle fatigue.
- Thick adjustable shoulder pad.
- Quick and easy connecting.
- Built-in line cutter and slot with ear plugs.
Every item checked for quality
