Showing 46–54 of 260 results
-
Charlotte Pipe 2 in. PVC DWV 22-1/2-Degree Hub x Hub Street Elbow Fitting
$5.31 $2.92PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140°F. PVC is lightweight and easy to install. They require no special tools for cutting, and can be installed with solvent cementing, threading, flanging, and roll-grooved joining.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Battery Daddy Smart As Seen On Tv
$9.09 $5.00Battery Daddy Smart is the ultimate battery storage system with its unique double-sided design that stores and organizes up to 150 batteries. With Battery Daddy Smart each battery is kept safe and secure in a customized slot, the clear Easy View cover allows you to see all your batteries at once, the secure, heavy-duty latches make sure your batteries stay in place, the compact design and fold away handle allow Battery Daddy Smart to fit in a cabinet, drawer or shelf. Best of all, Battery Daddy Smart comes with a built-in battery tester so you can quickly test the life of the batteries you have. Great for home, office, boat, RV, workshop and more.
- Holds 150 batteries – 58 AAs, 68 AAAs, four 9-Volt, 8 Cs, 8 Ds and 8 button cells.
- Clear easy view cover – see all your batteries at once.
- Secure heavy-duty latches – batteries stay in place.
- Sleek and compact design – fits perfectly inside drawers.
- Sturdy fold-away handle for compact storage.
- Built-in battery tester included – easily test battery life.
- Great for home, office, boat, RV, workshop and more.
- Batteries not included.
Every item checked for quality -
RACO 1/2 in. Uninsulated Liquid-Tight Connector, 1-Pack
$3.31 $1.82Suitable for indoor or outdoor locations to connect flexible metallic liquidtight conduit or Type B flexible non-metallic conduit to a box or enclosure. Features our split-gland ring that ensures a liquidtight seal. Zinc electroplated for corrosion resistance.
- Steel and malleable iron construction provides raceway integrity.
- Sealing washer provides a liquidtight seal when terminating the connector in a threadless opening.
- Locknut provided.
- Suitable for use in class 1, div 2, class 2, div 1 and 2, class 3, div 1 and 2 hazardous locations.
Every item checked for quality -
Intermatic 40 Amp 60-Minute Indoor Wall Mounted Mechanical Water Heater Timer, Steel, Gray
$77.11 $42.41With the easy-to-set Yellow Dial, these time switches allow for basic control of electric water heaters. These time switches offer a minimum ON/OFF time of 1-hour and are available for 208-250 VAC applications. With the proven reliability of our mechanical line, these time switches provide dependable electric water heater control.
- 2-sets of on/off trippers.
- Enables shifting electricity use into off-peak hours to reduce energy costs.
- Convenient external override switch.
- Up to 12 on/12 pff events with the purchase of additional trippers (156T1978A).
- Metal indoor enclosure.
Every item checked for quality -
BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Outlet Diameter Compression Outlet 1/4-Turn Angle Valve, #64
$5.45 $3.00BrassCraft 1/2 in. Nominal push connect inlet x 3/8 in. Outlet Diameter push connect outlet 1/4-turn angle valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a 90 turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.
- 1-piece body construction provides strength, durability and long-lasting performance.
- 1/2 in. nominal push connect x 3/8 in. OD push connect.
- Compatible with copper, PEX or CPVC tubing.
- For use in potable water distribution systems, not intended for recirculating water systems that produce continuous use temperatures above 115°F for those applications, use our KT series ball stops.
- Smooth, quarter-turn operation, on/off flow control with a 90 turn of the handle.
- 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
- Easy-to-remove handle protects against accidental operation during rough-ins.
- Installation ready: requires no special tools, soldering OT glue for a watertight seal.
Every item checked for quality -
Steel City 1-Gang 4 in. Handy Box Cover (Case of 25)
$22.75 $12.51This 1-Gang Blank Utility Box Cover is made of durable steel with a galvanized finish for corrosion resistance. It is 1/4 in. raised. To ensure safety, it is both UL and CSA Listed.
- Model # 58C1-25R.
- Corrosion-resistant galvanized steel.
- 4 in. W x 2-1/8 in. H.
- UL and CSA Listed.
- For indoor use.
Every item checked for quality -
Powercare 16 in. Y54 Semi Chisel Chainsaw Chain
$17.82 $9.80
The PowerCare Saw Chain features Centri-Lube oil-ways on all drive links. These oil-ways allow lubrication to flow up through the drive links and to the rivets. This reduces friction, chain stretch and results in fewer adjustments needed to the chain. This chain has hardened, chromed semi chisel cutters that allow it to stay sharper longer and cut faster in dirty cutting conditions, ideal for consumer use.
- Powercare saw chain has chromed cutters for fast, smooth cutting and low kickback design for safety and durability.
- This chain fits many McCulloch chain saw models.
- Underwriter’s laboratories (UL) certified to American National Standards Institute (ANSI) standards for low kickback safety chai.
- Centri-lube self-lubricating drive links that enhance chain life and reduce stretch.
- Pitch: 3/8 in. LP semi-chisel; gauge: .050 in.; 54 drive links; file size: 5/32 in.
Every item checked for quality
