Showing 55–63 of 260 results
-
WIEGMANN Outdoor Enclosure 6 in. x 6 in. x 4 in. NEMA 3R Screw Cover/Pull Box
$44.27 $24.35WIEGMANN 6 In. x 6 In. x 4 In. rain-proof screw cover box is made of pre-galvanized steel and a gray polyester powder inside and out. It is designed for indoor or outdoor locations. The screw cover box features a drip shield top and smooth seamless sides, front, and back, knockouts are standard in the bottom, no gasket is required, hasp for padlocking and provisions for meter seal are provided. A slip on reversible, removable cover is securely fastened with screws located along the bottom edge and ideal for surface mounting.- Model #RSC060604RC.
- Designed for use as wiring boxes and junction boxes.
- Provide protection in outdoor applications against rain, sleet, and snow, or indoors against dripping water.
- ANSI-61 gray polyester powder inside and out.
- Drip shield top and smooth seamless sides and front.
- Mounting holes provided on back of enclosure.
- Hasp for padlocking or meter seal is provided.
Every item checked for quality -
Lithonia Lighting Contractor Select LQM Series 120/277-Volt Integrated LED White and Red Exit Sign W/Back Up Battery
$79.96 $43.98The Lithonia Lighting Quantum Thermoplastic LED Emergency Exit Sign features an engineering-grade thermoplastic housing that is impact resistant, scratch resistant and corrosion proof. This exit sign uses LED light bulbs and has a nickel-cadmium battery. Innovative snap-together design allows installation in less than 3-minutes.
- 180 Lumens.
- White sign with red lettering.
- Thermoplastic housing.
- Meets UL 924 requirements.
- Uses two 1-Watt LED light strips (included).
- Nickel-cadmium backup battery.
Every item checked for quality -
Good Vibrations Weight Absorbing Trimmer Strap (Bungee)
$19.96 $10.98Good Vibrations Zero-Gravity Trimmer Shoulder Strap uses Bungee Pro-X technology to absorb the weight of the Trimmer, and relieves the tension in your shoulders, back and arms. It is ideal for all string trimmers, gas or electric, commercial or household use. Quick connect features attaches to trimmer in seconds.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)
$27.27 $15.00BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. ID (3/8 in. OD).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
1-1/2 in. Straight Non-Metallic Connector
$11.82 $6.501-1/2 in. Straight Connector for use with non-metallic liquid-tight conduit. Only type B may be used. It is produced from UV rated plastic for long outdoor life.
- May be secured to conduit while fully assembled because of a sno-spin ferrule.
- Simply loosen nut and screw onto conduit.
- Liquid-tight seal provided by our pressure sensitive internal gland when the nut is tightened.
- Liquid-tight seal is also assured between fitting and box by a sealing ring.
Every item checked for quality -
Halex 1/2 in. Electrical Metallic Tube (EMT) Combination Coupling (25-Pack)
$24.87 $13.68The UL and cULus safety listed. 1/2 in. Combination Coupling is a standard fitting that is intended for indoor use. The combination coupling is made of zinc, comes with 3 screws and is compatible with EMT conduit. 3 screws included.
- For indoor use.
- Made of zinc.
- Compatible with EMT conduit.
- Meets UL and cULus requirements.
Every item checked for quality -
#63, BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. OD Push Connect Outlet 1/4-Turn Straight Valve
$5.45 $3.00BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. OD Push Connect Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.
- Original retail price: $10.46.
- 1-piece body construction provides strength, durability and long-lasting performance.
- 1/2 in. nominal push connect x 3/8 in. OD push connect.
- Compatible with copper, PEX or CPVC tubing.
- For use in potable water distribution systems, not intended for recirculating water systems that produce continuous use temperatures above 115°F for those applications, use our KT series ball stops.
- Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
- 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
- Easy-to-remove handle protects against accidental operation during rough-ins.
- Installation ready: requires no special tools, soldering to glue for a watertight seal.
Every item checked for quality -
Apollo 3/4 In. X 3/4 In. Pvc Schedule 40 Slip X Slip Ball Valve Pro Pack (12-Pack)
$18.18 $10.00PVC Sch. 40 Ball Valves are compact and lightweight. This Slip x Slip valve is designed for a variety of applications including pressure distribution of cold water in irrigation, pool, spa, agricultural, commercial and light industrial applications and comes in a plastic jar of 12 valves which is convenient, resealable, and reusable. The ball valves are NSF approved and have EPDM seats and O-rings integrated into the durable PVC body.
- PVC schedule 40 construction for durability.
- Full port design allows for maximum efficiency and minimal turbulence or pressure reduction.
- Quarter-turn flow control for easy on and off.
- NSF / ANSI standard 372 certified.
- Slip connections conform to ASTM D2467.
- Working temperature range: 41°F to 122°F (5°C to 55°C).
- Maximum pressure rating 150 psi at 73°F (22°C).
- Requires solvent cement for installation (not included).
- Please note – as temperature increases, working pressure decreases, the optimal working pressure for PVC valves is 150 psi at 73°F (22°C) if the temperature increases above 73°F (22°C), use the PVC. correction factor to determine working pressure, multiply the maximum working pressure by the correction factor, please see correction factor grid on the attached specification sheet.
Every item checked for quality
