Showing 64–72 of 260 results
-
2 in. Bolt-On Hub for Electrical Panels/Load Centers with B Openings
$20.47 $11.26Bolt-On Hub, along with its elongated mounting holes, reduces the need for costly conduit offsets and bends while allowing for easy and quick adjustments. The Square D by Schneider Electric 2 in. Hub is for use in Square D load centers, CSED devices and safety switches. This hub is a Type B size and is UL and CSA safety listed.
- For use in Square D load centers, CSED devices and safety switches.
- Can be used for outdoor load centers and safety switches.
- UL and CSA listed.
- Type B size.
- ANSI certified.
Every item checked for quality -
Steel City 2-Gang New Work Square Device Electrical Wall Box (Case of 10)
$65.29 $35.91Mount electrical switches and receptacles to wood or metal wall studs with the 2-Gang Square Device Wall Box. This wall box can be used in indoor and outdoor residential and commercial applications. It offers welded construction with 3/4 in. and 1/2 in. eccentric knockouts and ground bump.
- Model # 2G4D1234-10R.
- Use to mount electrical switches and receptacles to wood or metal wall studs with 3/8 in. offset.
- Zinc-galvanized steel is rust- and corrosion resistant.
- Compatible with electrical conduit wiring in indoor/outdoor residential and commercial applications.
- UL Listed.
- 17 knockouts for use with 1/2 in. and 3/4 in. connections.
Every item checked for quality -
Dyna-Glo Pro 4,800-Watt 240-Volt Electric Garage Heater
$94.96 $52.23The Dyna-Glo Professional 4,800-Watt Electric Garage Heater is the ideal heating solution for your garage, warehouse or workshop. The Dyna-Glo Professional Electric Garage Heater features 2-heat settings, convenient space-saving ceiling-mount and adjustable thermostat. The EG4800DGP provides 16,380 BTUs while efficiently heating areas up 400 sq. ft. To ensure safety this heater was designed with overheat protection and an industrial grade steel grill.
- 2-heat settings.
- BTUs: 12,285 low, 16,380 high.
- Fully enclosed motor.
- Space saving ceiling mounted design.
- Fully assembled.
- NEMA plug included.
Every item checked for quality -
Cap A Tread Bennett Valley Oak/Kettle Hill Oak 47in.Lx12.15in.Wx2.28in.T Vinyl Stair Tread and Reversible Riser Kit Adhesive
$66.96 $36.83Cap A Tread is a durable, seamless stair tread cover that is easily glued down over your existing stair treads. Use Cap A Tread to renew your stairs in a day to a fresh new look! Coordinates with many vinyl and laminate plank flooring colors.
- Buy the correct size for your existing treads: 1.69 in. Thick Cap A Tread will cover existing stair treads up to 1.3 in. thick; 2.28 in. Thick Cap A Tread will cover existing stair treads up to 1.9 in. thick.
- Cap A Tread adds character to your stairs, product visuals are designed to closely coordinate with flooring as there may be slight color and texture variation.
- Durable, seamless cover laminated over MDF.
- Coordinates with many flooring types and thicknesses, including vinyl and laminate plank flooring.
- Easy glue down installation to coordinate stairs with your floor.
- Designed to coordinate with many flooring colors, or can be used as a standalone retrofit for an existing stair finish, such as carpet.
- Allows the customer to achieve a great new look that is affordable.
- Cap A Tread fits over existing treads without having to modify them.
- Simply cut to fit and glue over the existing stair tread.
- For residential and light commercial use; interior use only.
- Easy to clean with just a damp cloth.
- Tread and riser kit includes a reversible riser that is white on one side and matching color on the other.
- Proudly manufactured by Zamma Corporation.
- Use only urethane based adhesive to install Cap-A-Tread.
Every item checked for quality -
SharkBite 1/2 in. Brass Push-to-Connect Dishwasher Installation Kit
$36.36 $20.00The SharkBite Dishwasher Installation Kit has everything you need to install your new dishwasher, it’s fast and simple. Push-to-Connect fittings require no glue, soldering, unions or tools. The kit includes 1 SharkBite 1/2 in. Dual Outlet Angle Stop Valve, 1 SharkBite 1/4 in. x 3/4 in. MPT Elbow, 1 SharkBite 1/4 in. x 3/4 in. GHT Elbow, 1 SharkBite 1/4 in. Stop Valve Adapter, 10 ft. coil of 1/4 in. PEX Pipe, 2 Disconnect Clips (1/2 in. and 1/4 in.). The SharkBite Dual Outlet Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up behind the dishwasher.
- Lead free DZR brass construction for durability and reliability.
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes.
- Innovative push-to-connect design makes for quick and easy installation.
- Push-to-connect fittings require no solder, glue, unions, or tools.
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces.
- Designed for potable water distribution as well as hydronic heating applications.
- Corrosion resistant to improve longevity.
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels.
- Meets all UPC, IPC and cUPC requirements.
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility.
- Rated to 200°F and 200 psi.
- Rated to 200°F and 200 psi.
Every item checked for quality -
WIEGMANN Outdoor Enclosure 6 in. x 6 in. x 4 in. NEMA 3R Screw Cover/Pull Box
$44.27 $24.35WIEGMANN 6 In. x 6 In. x 4 In. rain-proof screw cover box is made of pre-galvanized steel and a gray polyester powder inside and out. It is designed for indoor or outdoor locations. The screw cover box features a drip shield top and smooth seamless sides, front, and back, knockouts are standard in the bottom, no gasket is required, hasp for padlocking and provisions for meter seal are provided. A slip on reversible, removable cover is securely fastened with screws located along the bottom edge and ideal for surface mounting.- Model #RSC060604RC.
- Designed for use as wiring boxes and junction boxes.
- Provide protection in outdoor applications against rain, sleet, and snow, or indoors against dripping water.
- ANSI-61 gray polyester powder inside and out.
- Drip shield top and smooth seamless sides and front.
- Mounting holes provided on back of enclosure.
- Hasp for padlocking or meter seal is provided.
Every item checked for quality -
24 in. W x 22 in. D x 36.4 in. H Bathroom Vanity in Grey with Marble Stone Vanity Top in White with Single White Sink
$600.00 $330.00Complete your bathroom renovation with this vanity set. It’s made from 100% solid wood in grey paint finish. The surface is made from marble with a backsplash that protects your walls from spills and splashes. It also accommodates a big rectangular ceramic basin in a white finish. The soft-closing drawer and doors allow you to store an assortment of bathroom essentials. This vanity ensures both form and function in your bathroom or powder room for you and your guests.
- Vanity was crafted from solid wood and grey color paint finish, it is arranged with one drawer and two doors which offer usable effortless storage.
- White marble countertop – this top includes backsplash, 1-undermount porcelain sink, 3-pre-drilled holes for widespread faucets.
- Sliders are concealed soft-close function, ideal for your bathroom as it prevents any slamming noises.
- Included: cabinet, top, basin, backsplash, hardware.
- Not included: faucet and mirror.
- Brushed Nickel finish for handles.
- Factory assembled base cabinet of the vanity has an easy installation.
Every item checked for quality -
EcoSmart 75-Watt Equivalent BR40 Dimmable ENERGY STAR LED Light Bulb Soft White (2-Pack)
$10.47 $5.76Upgrade your current lighting with the EcoSmart 75-Watt equivalent BR40 Dimmable Flood LED Light Bulbs. Use these bulbs to replace your traditional incandescent bulbs-with all the benefits of LED technology. Save on your energy bill every month. Rated to last for 15,000-hours and estimated to cost only $1.45 per-year to operate, these energy efficient BR40 LED light bulbs will reduce household energy costs by using 85% less energy than traditional incandescent bulbs. Using only 12-Watt to produce 945 Lumens of Soft White (2700K) light, these flood lights produce brightness equivalent to a 75-Watt incandescent light bulb. The soft white color temperature is essential in creating a relaxing, balanced feel throughout your home. It is recommended for living rooms, kitchens, bathrooms and bedrooms. Customize your lighting style with this dimmable bulb by adjusting your light from soft white to a relaxing, low light. Suitable for use in enclosed fixtures and ideal replacement bulbs for indoor recessed and track lighting. Start saving today with EcoSmart.
- Brightness: 945 Lumens.
- Estimated yearly energy cost: $1.45 (based on 3-hours/day, 11/kWh, costs depend on rates and use).
- Life: 13.7-year (based on 3-hours/day).
- Light appearance: 2700K (soft white).
- Energy used: 12-Watt (Equivalent to a 75-Watt standard incandescent bulb).
- Energy used: 12-Watt (equivalent to a 75-Watt standard incandescent light bulb).
- Fully dimmable with a shadow-free experience.
- Ideal for use in totally enclosed fixture.
- Damp locations rated.
- LED light bulb does not contain mercury.
- Energy efficient.
Every item checked for quality
