Hot Products

  • 1-1/4 in. Center Stop PVC Coupling Conduit Fitting

    This connector consists of two solvent weld female ends. A center stop ensures positioning of conduit. The coupling is made of rigid PVC.

    • Connects conduit of the same diameter.
    • Non-corrosive PVC construction.
    • Joins metal conduit to PVC conduit or PVC to PVC.
    • UL and CSA safety listed for greater safety and peace of mind.
    Green checkmark of qualityEvery item checked for quality
    $1.51 $0.83

  • BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve, #73

    BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.

    • Compatible with PEX, copper and CPVC.
    • Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
    • Installation ready: requires no special tools, soldering or glue for a watertight seal.
    • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Pre-inserted tube stiffener is “installation ready” for a faster connection.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • Chrome-plated brass.
    • Temperature rating: 40° to 160°F.
    • Pressure rating: 125 psi maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • Powercare MTD/Cub Cadet SLT 50 in. Tractor Deck Belt

    The Kevlar V-Belts are durable and long lasting versus many of the V-Belts which are made with Polyester Cords. The Kevlar V-Belts are manufactured to withstand the heat, oil, and back idler pulleys often associated with outdoor power equipment. Kevlar belts also offer high tensile strength, non-extensibility, and high resistance to shock loads.

    • Mower blade drive belt.
    • For MTD/Cub Cadet and Toro/wheel horse riding mowers.
    • Fits multiple models of MTD/Cub Cadet and Toro/wheel horse riding mowers.
    • Kevlar cords are durable and long lasting.
    Green checkmark of qualityEvery item checked for quality
    $45.49 $25.02

  • HDX 600 Lumens Integrated LED Clamplight

    This 600 Lumens Integrated LED Clamplight presents a unique ultra-thin design that is compact and convenient to use in different sites, such as the garage or workroom. Supplying with the separate magnetic metal base to have 4-in-1 function which makes it to be a hanging lamp, hand-Held work lamp, table lamp or magnetic lamp freely according to different demands. This light is built with the LED integrated, ensuring long-lasting and energy-efficient illumination.

    • High power SMD LED with 600 Lumens light output.
    • Ultra-thin panel for saving freight, store shelves and storage places.
    • With metal base, 4-in-1 function: hanging lamp, hand-held work lamp, table lamp and magnetic lamp.
    • Ball joint for easy positioning.
    • SPT-2-8/2 in. 5 ft. cord.
    • Energy saving durable on/off power switch.
    • Full metal clamp with scratch-resistant vinyl sleeve.
    • Frosted lens decreases glare and provides softer and even light distribution for user-friendly.
    • Heavy duty structure.
    Green checkmark of qualityEvery item checked for quality
    $19.98 $10.99
tools
54 Products
View All Items

  • QEP 4-1/8 in. Wide Economy Knee Kicker

    The Economy Knee Kicker secures carpet during installation and makes it easy to fix loose carpet. This positioning tool is designed for use with low-profile carpet, and features teeth angled forward to help grip and hold the carpet. The teeth are not straight, because this kicker is not intended to pull or stretch carpet to remove wrinkles. The thick foam-filled bumper pad and nonslip, comfort foam grip handle make this knee kicker comfortable to use. It is ideal for small installations, to fix loose carpet, and to use in hallways and closets. Lightweight aluminum and steel construction.

    • For small installations and fixing loose carpet.
    • Tighten loose carpet like a professional.
    • Lightweight aluminum and steel construction.
    • Great for hallways and closets.
    • Features a soft, foam comfort grip handle.
    • Triple nap grip design to hold carpet firmly.
    Green checkmark of qualityEvery item checked for quality
    $45.47 $25.01

  • QEP Floor Demolition and Tear-Out Scraper and Stripper with Reversible Head

    The QEP 62965 Reversible Ergo-Scraper adds comfort and increases force when scraping and prying. Can be converted from 5 in. to 3 in. wide (or 5 in. to 7 in.). Ideal for scraping tight areas. Better leverage and durability. Great for removing tile, wood, laminate, stone, carpet, ice and roofing.

    Green checkmark of qualityEvery item checked for quality
    $36.36 $20.00

  • Husky 2 in. Ratcheting PVC Cutter

    Husky’s 2 in. Quick Change Ratcheting Cutter tackles PVC, CPVC, Polypropylene pipe, PEX and Polyethylene pipe up to 2-3/8 in. outer diameter (2 in. inner diameter). The ratcheting action features quick change blade mechanism for added user convenience.

    • Cuts up to 2 in. PVC (or 2-3/8 in. O.D.).
    • Perfect addition to your toolbox.
    • Quick-change blade mechanism.
    Green checkmark of qualityEvery item checked for quality
    $26.82 $14.75

  • Qep Tile Tools 10-154 Loop Pile Cutter

    Use the QEP Tile Tools 10-154 Loop Pile Cutter for your carpet cutting tasks. It features a 50-degree blade angle for cleaner smoother precise cuts. The Roberts cutter has a quick-release blade-replacement feature for fast blade changes and an extra-long nose for better row separation. The ergonomic grip provides comfort and efficiency and the cutter…

    Green checkmark of qualityEvery item checked for quality
    $16.56 $9.11
lighting
298 Products
View All Items

  • HALO 8 in. Selectable CCT and Lumens New Construction Canless Recessed Integrated LED Kit

    The HLB8 is a 8 in. ultra-thin LED lens downlight with remote driver/junction box suitable for new construction and remodel applications. Field selectable color temperature and high color rendering provide excellent color performance. Simplified installation in drywall or suspended ceilings eliminates recessed cans saving time and money. Installs from below the ceiling in as little as 3-1/2 in. plenum height, can be used in direct contact with insulation and is airtight. Use for general area lighting in low to medium height ceilings where energy savings, long life and economy are required.

    • Suitable for IC and non-IC applications.
    • 120-Volt to 277-Volt with 0-Volt to 10-Volt dimming.
    • 90 CRI (min), R9 50 and color accuracy within 4 SDCM.
    • Dimmable down to 5%.
    • Wet location listed for showers and protected ceilings.
    • ENERGY STAR.
    Green checkmark of qualityEvery item checked for quality
    $61.47 $33.81

  • Progress Lighting Emblem Collection 5-1/2 in. Slim-Line White Low Profile Integrated LED Surface Flush Mount

    Original Retail Price: $33.00.

    The P810016 Edgelit Flush Mount delivers a solution for both residential and commercial markets. The Edgelit technology provides a bright and evenly illuminated surface in a very slim profile. The integrated LED power supply does not protrude into the junction box, allowing for compatibility to 4 in. octagonal, 4 in. round shallow and 4 in. round PVC junction boxes. This surface mounted luminaire measures 11 in. Dia with an overall height of 1 in. In addition, the P810016 is wet location rated, Title 24 JA8 2016 listed, ENERGY STAR listed and is a cost effective solution for fire rated applications (when installed onto a fire rated junction box). The P810016 luminaire combines modern aesthetic, new technology, performance, cost and safety benefits.

    • Simple installation to steel mounting plate.
    • Light weight polycarbonate luminaire construction.
    • Polycarbonate diffuser controls glare and provides an evenly illuminated surface.
    • Integrated DC LED power supply capable of flicker-free dimming to 10% brightness with many triac/forward phase dimmers (See dimming notes).
    • Can be installed to 4 in. octagonal j-box, 4 x 1/2 in. round shallow j-box and 4 in. round PVC j-box.
    • Suitable for use in IC or non-IC applications.
    • Meets California title 24 JA8-2016 and is ENERGY STAR listed.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • Lithonia Lighting 2SP8 G 2 U316 A12 120 GESB 2-Light White Fluorescent Ceiling Troffer

    The Lithonia Lighting 2 ft. x 2 ft. Grid 2-Light T8 Fluorescent Troffer is easily installed recessed in grid ceilings and provides general illumination for residential and commercial applications. Light-weight design with smooth hemmed sides and smooth, inward formed end flanges allow for safe handling and easy installation.

    • Energy-efficient T8 fluorescent technology.
    • Steel door frame has superior structural integrity with premium extruded appearance and flush mitered corners.
    • Steel construction is finished with a high-gloss, baked white enamel including a five-stage iron-phosphate pretreatment that ensures superior paint adhesion and rust resistance.
    • 120-Volt electronic ballast powers two 31-Watt T8 U-bent fluorescent bulbs (sold separately).
    • Suitable for installation in most 2 ft. x 2 ft. grid ceilings.
    • Integral T-bar clips secure fixture in most 2 ft. x 2 ft. grid ceilings.
    • UL listed to US safety standards.
    • A12 acrylic lens features a reverse apex pattern for superior lamp obscuration and improved visual comfort.
    Green checkmark of qualityEvery item checked for quality
    $49.47 $27.21

  • HALO 4 in. 2700K-5000K Selectable CCT Surface Integrated LED Downlight Recessed Light with White Round Trim

    The Halo Surface LED Downlight (SLD4) is an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. Equipped with 5 color temperature settings ranging from soft (2700K) to daylight (5000K), this SLD4 (4 in.) is designed for installation in many standard and fire-rated 3-1/2 in. and 4 in. round or octagon junction boxes. Supply wire adapater with LED quick wiring connector included. Suitable for residential or commercial installations. Ideal for closets, storage areas, attics and basements.

    • Fixture is built to last with maintenance-free energy efficient LEDs with 50,000-hours of life.
    • Equipped with 5 color temperature settings ranging from warm (2700K) to daylight (5000K).
    • 90 CRI title 24 Compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
    • Flexible mounting with included junction box bracket.
    • ENERGY STAR qualified for energy conservation and savings up to $400 savings over the life of the ceiling light fixture.
    • Can be installed in 3-1/2 in. x 2 in. and 4 in. x 1-1/2 in. junction boxes for new construction, remodel and retrofit applications.
    • Compatible with most 4 in. housings.
    • Designed for continuous dimming capability to nominally 5% with many 120-Volt Leading Edge (LE) and Trailing Edge (TE) phase control dimmers.
    • Wet location, damp location, air-tite, insulation contact rated and can be used with fire-rated ceiling system.
    • SLD retrofit kit sold separately.
    Green checkmark of qualityEvery item checked for quality
    $24.96 $13.73
bathroom-vanities
10 Products
View All Items

  • 60 in. W x 22 in. D x 35 in. H Free-standing Double Sinks Bath Vanity in Green with Straight Quartz Vanity Top

    The Seneca collection features classical design enhanced by a smooth green finish, creating an aesthetic that mixes flair and function. Decorate your bathroom with this contemporary bathroom vanity set, this vanity offers generous storage space while maintaining a minimalistic look. Incorporate a classic vanity in your bathroom with a modern twist. Its freestanding frame is made from solid poplar wood in the finish of your choice, and built on tapered legs. The surface is made from Quartz with a backsplash that protects your walls from spills and splashes. It also accommodates the big rectangular ceramic basin in a white finish. The soft-closing drawers and shelf allow you to store an assortment of bathroom essentials. This vanity ensures both form and function in your bathroom or powder room for you and your guests.

    • Overall dimensions are 60 in. W X 22in. D X 35 in. H.
    • White quartz countertop which is an entire single layer top with 0.7 in. thickness for straight edge, includes backsplash.
    • Arranged with 2-functional drawers with soft-close function and 1-shelf, which offered usable effortless storage.
    • Countertop is pre-drilled for 8 in. widespread faucet for quick installation.
    • Undermount ceramic rectangular sink with overflow hole to help promote a bacteria-free environment.
    • Sliders are concealed soft-close function, ideal for your bathroom as it prevents any slamming noises.
    • Unique designed golden brushed handle and knob.
    • Faucet, Drain, Mirror and P-trap sold separately.
    Green checkmark of qualityEvery item checked for quality
    $1236.36 $680.00

  • 24 in. W x 22 in. D x 36.4 in. H Bathroom Vanity in Grey with Marble Stone Vanity Top in White with Single White Sink

    Complete your bathroom renovation with this vanity set. It’s made from 100% solid wood in grey paint finish. The surface is made from marble with a backsplash that protects your walls from spills and splashes. It also accommodates a big rectangular ceramic basin in a white finish. The soft-closing drawer and doors allow you to store an assortment of bathroom essentials. This vanity ensures both form and function in your bathroom or powder room for you and your guests.

    • Vanity was crafted from solid wood and grey color paint finish, it is arranged with one drawer and two doors which offer usable effortless storage.
    • White marble countertop – this top includes backsplash, 1-undermount porcelain sink, 3-pre-drilled holes for widespread faucets.
    • Sliders are concealed soft-close function, ideal for your bathroom as it prevents any slamming noises.
    • Included: cabinet, top, basin, backsplash, hardware.
    • Not included: faucet and mirror.
    • Brushed Nickel finish for handles.
    • Factory assembled base cabinet of the vanity has an easy installation.
    Green checkmark of qualityEvery item checked for quality
    $600.00 $330.00

  • 30 in. W x 22 in. D x 35.4 in. H Bathroom Vanity in Navy Blue with Marble Stone Vanity Top in White with Single White Sink

    Fantastic value and a modern design, maximize your bathroom space. This elegant navy blue vanity was constructed of solid oak and plywood for high quality with unique designed handles, soft-close glides and hinges. Italian carrara white marble top with under-mount sink which demonstrates quality construction and attention to details.

    • Overall Dimensions are 30 in. W X 22 in. D X 35.4 in. H.
    • Vanity is constructed with solid oak and plywood.
    • Color for navy blue paint finish inside and outside.
    • Unique designed golden zinc-alloy handles.
    • 1 soft close drawer and 2 soft close doors.
    • Carrara white marble top, top thickness is 1.2 in. (include back splash of 4″ height), pre-drilled 8 in widespread faucet hole.
    • CUPC certified white porcelain under mount sink ( 20 in. x 14.9 in. x7.2 in.).
    • Mirror and faucet are not included.
    Green checkmark of qualityEvery item checked for quality
    $636.36 $350.00

  • 48 in. W x 22 in. D x 36.2 in. H Bath Vanity in Navy Blue with Marble Vanity Top in White with White Basin

    Decorate your bathroom with this Contemporary Bathroom Vanity Set, this vanity offers generous storage space while maintaining a minimalistic look. Incorporate a classic vanity in your bathroom with a modern twist. 48 in. vanity with double basins which will be your best choice.

    • Model # 69048D-CAB-DB-SQ.
    • Vanity was crafted from solid oak wood with plywood, navy blue color paint finished. It is arranged with 5-functional drawers and 4-doors which offer usable effortless storage.
    • Italian Carrara white marble countertop, top with 1 in. thickness for beveled edge. This top includes backsplash, 1-undermount porcelain sink (CUPC certified), 3-pre-drilled holes for widespread faucets.
    • Hinges and sliders are concealed with soft-close function, ideal for your bathroom as it prevents any slamming noises.
    • Golden brushed nickel knobs and handles.
    • Included: cabinet, top, basin, backsplash and hardware.
    • Not included: faucet and mirror.
    • Arranged with 4-functional drawers and 4-doors which offered usable effortless storage.
    • Factory assembled base cabinet of the vanity has an easy installation.
    Green checkmark of qualityEvery item checked for quality
    $1054.55 $580.00

Need Help? Contact us

    Google Reviews

    five star rating

    Nice selection at a fair price! Customer service was on point with help loading and making sure I had exactly what I needed. I’d definitely recommend this place!

    Rolan Hardley

    five star rating

    Very friendly and easy going. Excellent customer service. Levon was a great salesman and very attentive. We’ll definitely do business with them again. Thanks so much Levon for all of your help.

    Jennifer Aparicio

    five star rating

    Amazing finds, from Porcelain tile for my new bathroom to even furnishing it with a gorgeous Vanity, Mirror, storage cabinet and rods. Great variety in inside and outdoor lighting with many styles, a must to get what you need at a very reasonable price.

    Jackie Castellanos