Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home

Category: Plumbing

Showing 1–9 of 52 results

Filters

  • BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve, #73

    BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.

    • Compatible with PEX, copper and CPVC.
    • Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
    • Installation ready: requires no special tools, soldering or glue for a watertight seal.
    • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Pre-inserted tube stiffener is “installation ready” for a faster connection.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • Chrome-plated brass.
    • Temperature rating: 40° to 160°F.
    • Pressure rating: 125 psi maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • FORIOUS Matte Black Bathroom Faucet – Single Handle, 1-Hole, 6-inch

    The upper opening gives you a clear view of the flow of water in a stylish way, giving you a wonderful view of the waterfall, relax, pleasant mood. Single handle bathroom faucets design help users adjust to your preferred flow of water and the temperature easily, suitable for all kinds of bathroom styles. Lead-free brass bathroom faucet body ensures health and quality. Ceramic valve core has passed 500,000 non-leakage cycle tests, with double-layer encrypted leak-proof hose. Stability and reliability is the biggest significance of faucet. Flow Rate: 1.2 Gallons Per Minute. Multi-layer sprayed matte black bathroom faucet surface has passed 100% Acid Salt Spray Testing, non-corrosion, non-rust, anti-scratch. The classic matte black faucet makes your bathroom more elegant and solemn.

    Green checkmark of qualityEvery item checked for quality
    $90.91 $50.00

  • Woodford 1/2 in. x 1/2 in. Brass Sweat x MPT x 8 in. L Freeze-Resistant Anti-Rupture Sillcock Valve

    This Woodford Manufacturing Company 1/2 in. x 1/2 in. Brass Sweat x MPT Model 19 anti-rupture sillcock with 8 in. L features a resetting pressure relief valve (PRV) that prevents the faucet tube from rupturing during freezing temperatures, even if a hose is inadvertently connected to the faucet. Use for year-round residential irrigation purposes regardless of the outside temperature. Woodford, The Choice of Professionals.

    • Anti-siphon protection.
    • Integral backflow device protects up to 125 psi of backpressure, eliminating the need for an add-on vacuum breaker.
    • EPDM rubber packing helps prevent leaking behind the packing nut.
    • Stainless-steel seat to help prevent wire draw.
    • Full-circle operating threads on the valve body and retainer for a secure fit.
    • Powder-coated die-cast aluminum oval handle for strength.
    • Standard O size seat washer.
    • Adjustable polycarbonate wall flange.
    • No-lead solder.
    • Brass construction.
    • 8 in. wall thickness plus the 1 1/4 in. inlet = 9 1/4 in. from the back of the faucet.
    Green checkmark of qualityEvery item checked for quality
    $70.00 $38.50

  • BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Outlet Diameter Compression Outlet 1/4-Turn Angle Valve, #64

    BrassCraft 1/2 in. Nominal push connect inlet x 3/8 in. Outlet Diameter push connect outlet 1/4-turn angle valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a 90 turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.

    • 1-piece body construction provides strength, durability and long-lasting performance.
    • 1/2 in. nominal push connect x 3/8 in. OD push connect.
    • Compatible with copper, PEX or CPVC tubing.
    • For use in potable water distribution systems, not intended for recirculating water systems that produce continuous use temperatures above 115°F for those applications, use our KT series ball stops.
    • Smooth, quarter-turn operation, on/off flow control with a 90 turn of the handle.
    • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • Installation ready: requires no special tools, soldering OT glue for a watertight seal.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • Arrowhead Brass Chrome Fine Thread Self Draining Vacuum Breaker

    The VPC PK1390 is a replacement self-draining vacuum breaker for frost free hydrants with FINE THREADS (will not connect to hose threaded faucet). A must on all outdoor systems. It can easily be adapted with new installs or existing systems.

    • Red brass construction, nickel plated for protection from extreme weather.
    • Drains water from faucet upon shut off.
    • For replacing leaking vacuum breakers on fine threaded hose-bibs and sillcocks.
    • Red brass with 80-83% copper content.
    • For outdoor use; not for potable water.
    • ASSE 1019 approved; IAMPO certified.
    Green checkmark of qualityEvery item checked for quality
    $24.98 $13.74

  • Wilkins 3/4 in. Lead Free Brass NPT Pressure Relief Valve

    The P1000AXL-150C Pressure Relief Valve is set at 150 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.

    • Eliminates risk of over-pressure of storage tanks.
    • Epoxy-coating adds extra protection.
    • Pressure relief valve set at 150 psi.
    • CSA Compliance to ANSI Z21.22/CSA 4.4.
    • Certified to ASME Section IV by National Board.
    • Pressure relief valve settings of 30, 75, 125, and 150 psi offer versatility.
    Green checkmark of qualityEvery item checked for quality
    $37.40 $20.57

  • Delta Universal Seats and Springs Repair Kit

    Repair leaks in your bathroom or kitchen faucet with the Delta Universal Seats and Springs Repair Kit. The kit is compatible with Delta faucets that have stainless-steel ball valves (faucets and ball valves not included).

    • Use in Delta faucets with stainless-steel ball valves (faucets and ball valves not included).
    • Repairs leaks in kitchen faucets.
    • Can be used to repair leaks in bath faucets.
    • Includes 1 set of seats and springs.
    • Genuine Delta repair kit.
    Green checkmark of qualityEvery item checked for quality
    $5.98 $3.29

  • Sharkbite Prolock 1 In. Push-To-connect Plastic 90-Degree Elbow Fitting Pro Pack (3-Pack)

    SharkBite ProLock fittings are a versatile and innovative full-flow plumbing system utilizing push lock fitting technology and engineered specifically for use with SharkBite PE-RT and PEX pipe. The SharkBite 1 in. Push-to-Connect 90° Elbow intuitive design makes for one of the simplest and most dependable fittings on the market. No tools are required to make a connection. They use a collet with stainless steel teeth that grips the pipe when fully inserted, and an EPDM O-Ring to provide a permanent, leak-proof seal. The Twist-to-lock technology ensures maximum security. When twisted into place with indicator arrows aligned, the locking cap locks the pipe in place and creates an audible click. Removing a SharkBite fitting is just as easy with no tools needed; simply twist the cap turn counterclockwise to unlock then depress collet against the fitting to remove the pipe. ProLock fittings are suitable for hot and cold potable water and hydronic heating applications. They have been specifically designed for the Professional Plumber. Code approved for behind-the-wall installations.

    Green checkmark of qualityEvery item checked for quality
    $28.96 $15.93

  • SharkBite 1/2 in. Brass Push-to-Connect Dishwasher Installation Kit

    The SharkBite Dishwasher Installation Kit has everything you need to install your new dishwasher, it’s fast and simple. Push-to-Connect fittings require no glue, soldering, unions or tools. The kit includes 1 SharkBite 1/2 in. Dual Outlet Angle Stop Valve, 1 SharkBite 1/4 in. x 3/4 in. MPT Elbow, 1 SharkBite 1/4 in. x 3/4 in. GHT Elbow, 1 SharkBite 1/4 in. Stop Valve Adapter, 10 ft. coil of 1/4 in. PEX Pipe, 2 Disconnect Clips (1/2 in. and 1/4 in.). The SharkBite Dual Outlet Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up behind the dishwasher.

    • Lead free DZR brass construction for durability and reliability.
    • Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes.
    • Innovative push-to-connect design makes for quick and easy installation.
    • Push-to-connect fittings require no solder, glue, unions, or tools.
    • Fitting can be rotated on pipe after installation making it easier to work in tight spaces.
    • Designed for potable water distribution as well as hydronic heating applications.
    • Corrosion resistant to improve longevity.
    • Certified as a manufactured joint and for underground and behind-the-wall applications without access panels.
    • Meets all UPC, IPC and cUPC requirements.
    • Demount clip allows user to release the fitting from the pipe for convenient installation flexibility.
    • Rated to 200°F and 200 psi.
    • Rated to 200°F and 200 psi.
    Green checkmark of qualityEvery item checked for quality
    $36.36 $20.00
X