Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home

Category: Plumbing

Showing 1–9 of 64 results

Filters

  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. I.D. (3/8 in. O.D.).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • #7, BrassCraft 3/8 in. FIP Inlet x 3/8 in. Compression Outlet 1/4-Turn Angle Valve

    The BrassCraft 3/8 in. FIP Inlet x O.D. Compression Outlet 1/4-Turn Angle Valve allows you to control water flow easily and quickly. It’s used where the water pipe enters the room from the wall and it controls flow to plumbing fixtures including washing machines, toilets, faucets and more. This valve allows you to simply turn the handle when you need to do repairs or maintenance without turning the water off to the whole house.

    • Compatible with iron pipe.
    • Smooth on/off flow control with a quarter turn (90 degrees ) turn of the handle.
    • One-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • One-piece body construction for strength, durability and long-lasting performance.
    • Chrome-plated brass.
    • Temperature rating: 40 degrees to 160 degrees F.
    • Pressure rating: 125 PSI maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • Everbilt 120-Volt Condensate Pump W/ Hose

    This product is designed to automatically pump condensate water produced by A/C units, HVAC systems and dehumidifiers. High capacity, 20 ft. vertical pump life essential in below elevation condensate removal. This pump is easy to install in both new and existing applications. Powerful. Proven. Reliable.

    • 20 ft. vertical pumping capabilities.
    • Large reservoir allows for lower cycle time, extended pump life and less noise during operation.
    • Easy view status system: 3 LED indicators for constant monitoring of performance.
    • Anti-vibration feet help to absorb normal operating sounds.
    • Convenient, removable check valve which allows for hassle free cleaning.
    • Overflow safety switch allows for easy connection to A/C uni.
    Green checkmark of qualityEvery item checked for quality
    $94.98 $52.24

  • BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)

    BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. ID (3/8 in. OD).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • Everbilt 30/50 Low Pressure Switch For Well Pumps

    This pressure switch signals the pump to start when the water system drops to 30 PSI (factory set) and stops at 50 PSI (factory set). This switch is to be used with submersible well or jet pumps. It can be wired 115-Volt or 230-Volt. This switch must be used in conjunction with a well pressure tank. The air pressure in the well tank, when empty of all water, must be set to 28 PSI, or the switch will not operate properly. This switch is equipped with a low-level cut-off arm that automatically shuts off a well pump when there is a dramatic decrease in pressure, such as a leak in the discharge pipes or a faulty pressure tank.

    • Turns pump on at 30 psi, off at 50 psi.
    • Cap removes for easy adjustment.
    • Can be wired 115-Volt or 230-Volt.
    • For use with submersible well or jet pumps.
    • Motor wires are connected to the 2 middle posts (color does not matter).
    • Breaker box wires are connected to 2 outside posts (color does not matter).
    • 2-spring design allows for adjustment of cut-in and cut-out pressure settings.
    • Adjustments to springs should only be made by users with good knowledge of well systems.
    • Switch shuts off pump automatically when there is a dramatic decrease in pressure.
    Green checkmark of qualityEvery item checked for quality
    $30.82 $16.95

  • SharkBite 1/2 in. Push-to-Connect x 3/8 in. O.D. Compression Chrome-Plated Brass Quarter-Turn Straight Stop Valve

    SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

    • Works on wet lines, rotatable after installation, and removable.
    • Push-to-connect fittings are ideal for installation in tight spaces.
    • Rated to 160 degrees Fahrenheit and 125 PSI.
    • Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry.
    • Chrome-plated exterior body.
    • Low-lead DZR corrosion-resistant brass body.
    • Code approved, IAPMO listed, for details see Specifications.
    • Meets all UPC, IPC, and cUPC requirements.
    • Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately).
    • 1/2 in Pipe Insertion Depth = 15/16 in.
    Green checkmark of qualityEvery item checked for quality
    $12.45 $6.85

  • Everbilt 3/4 in. Compression x 3/4 in. MIP Brass Adapter Fitting

    Use these Camco 3/4 in. x 3/4 in. brass compression fittings for evaporative coolers to create a watertight connection at the end of an evaporative cooler pipe and fitting. Measurement is 3.63 in. in width and 5.5 in. in height. No solder or adhesives are needed for installation.

    • Compatible with most evaporative cooler pipes measuring 3/4 in. x 3/4 in.
    • Watertight fit.
    • Durable brass construction.
    • Used to create a watertight connection between a pipe, fitting and evaporative cooler.
    • Installs easily without solder or adhesives.
    Green checkmark of qualityEvery item checked for quality
    $12.98 $7.14

  • Swiss Madison 0.8/1.28 GPF Wall Mount Dual Flush Actuator Push Button Plate in White

    Wall Mount Actuator Flush Push Button Plate in White. This Actuator plate fits with All Swiss Madison Concealed Wall Carriers for use with our wall hung toilets. It features 2 buttons for dual flush compatibility and is very easy to clean.

    • Easy to use.
    • Plate clips off for easy access to the inner tank and to speedy valve.
    • Simple to clean.
    • Installation is a snap.
    • Easy to clean.
    • Actuator plate compatible with Swiss Madison dual flush systems.
    Green checkmark of qualityEvery item checked for quality
    $22.87 $12.58

  • Delta Universal Seats and Springs Repair Kit

    Repair leaks in your bathroom or kitchen faucet with the Delta Universal Seats and Springs Repair Kit. The kit is compatible with Delta faucets that have stainless-steel ball valves (faucets and ball valves not included).

    • Use in Delta faucets with stainless-steel ball valves (faucets and ball valves not included).
    • Repairs leaks in kitchen faucets.
    • Can be used to repair leaks in bath faucets.
    • Includes 1 set of seats and springs.
    • Genuine Delta repair kit.
    Green checkmark of qualityEvery item checked for quality
    $5.98 $3.29
X