Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home

Category: Plumbing

Showing 1–9 of 52 results

Filters

  • FitRite 21 in. x 16.5 in. Backflow Valve Cover

    The FitRite Insulated Backflow/RP Cover ensures you’re ready for the cold weather. 21 in. in length, the 2-1/4 in. in width and 16.5 in. in height is spacious enough to cover your valve and secure it there for the Winter. The valve cover is a sleek black and is for use as an irrigation system accessory.

    • Backflow valve cover.
    • Irrigation system accessory.
    • 21 in. length, 2-1/4 in. width, 16.5 in. height.
    • Black color.
    • Easy installation, installs in seconds.
    • Extends your watering season.
    • Fits most backflow assemblies.
    • Durable weatherproof material, UV and cold resistant.
    • Allows backflow devices to function properly.
    • Made for virtually all brands of PVB’s and RP’s.
    Green checkmark of qualityEvery item checked for quality
    $27.47 $15.11

  • Swiss Madison 0.8/1.28 GPF Wall Mount Dual Flush Actuator Push Button Plate in White

    Wall Mount Actuator Flush Push Button Plate in White. This Actuator plate fits with All Swiss Madison Concealed Wall Carriers for use with our wall hung toilets. It features 2 buttons for dual flush compatibility and is very easy to clean.

    • Easy to use.
    • Plate clips off for easy access to the inner tank and to speedy valve.
    • Simple to clean.
    • Installation is a snap.
    • Easy to clean.
    • Actuator plate compatible with Swiss Madison dual flush systems.
    Green checkmark of qualityEvery item checked for quality
    $22.87 $12.58

  • SharkBite Push-to-Connect Faucet Installation Kit

    The SharkBite Faucet Installation Kit has everything you need to install your new faucet. The kit includes 2 SharkBite 1/2 in. x 1/4 in. (3/8 in. O.D.) Push-to-Connect Angle Stop Valves, two 5 ft. coils of 1/4 in. PEX Pipe, two 1/4 in. (3/8 in. O.D.) SharkBite x 1/2 in. Swivel Faucet Connectors, and a 1/2 in. Chrome Trim Cover reversed functions as a disconnect and 1/4 in. disconnect clip to remove the pipe from the fitting if needed. The SharkBite Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up under the sink providing a clean, tangle free look. Once the stop valves are installed, thread the 1/2 in. faucet connectors onto the faucet connections and then measure and cut the PEX and push into the outlet on the stop valve and the faucet connector and the installation is complete.

    Green checkmark of qualityEvery item checked for quality
    $36.36 $20.00

  • #63, BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. OD Push Connect Outlet 1/4-Turn Straight Valve

    BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. OD Push Connect Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

    • Original retail price: $10.46.
    • 1-piece body construction provides strength, durability and long-lasting performance.
    • 1/2 in. nominal push connect x 3/8 in. OD push connect.
    • Compatible with copper, PEX or CPVC tubing.
    • For use in potable water distribution systems, not intended for recirculating water systems that produce continuous use temperatures above 115°F for those applications, use our KT series ball stops.
    • Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
    • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • Installation ready: requires no special tools, soldering to glue for a watertight seal.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. I.D. (3/8 in. O.D.).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • #5, BrassCraft 1/2 in. FIP Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve

    Gain control of your household plumbing fixtures with this BrassCraft 1/2 in. FIP Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve. Stop the water flow with the 90 degree water handle design and you can perform maintenance and repair without shutting off the water to the entire home. he straight valve is most often used where the water pipe enters the room from the floor.

    • Compatible with iron pipe.
    • Smooth on/off flow control with a quarter turn (90°) turn of the handle.
    • Smooth on/off flow control with a quarter turn (90°) turn of the handle.
    • Easy to install.
    • 1-piece body construction for strength, durability and long-lasting performance.
    • Chrome-plated brass.
    • Temperature rating: 40° to 160°F.
    • Pressure rating: 125 psi maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112,18,1/CSA B125,1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • NDS PVC Adapter, 4 in. DWV/SCH40 Hub X S&D Hub

    Connect 4 in. Drain Waste Vent (DWV)/Schedule 40 (SCH40) pipe to 4 in. Sewer and Drain (S&D) pipe with the PVC Adapter. The drain fitting also connects 4 in. DWV/SCH40 pipe to select drainage products compatible with 4 in. S&D connections such as channel drain outlets, drainage grates, and pop-up emitters. This adapter is used to connect two different pipe types. The adapter is made of polyvinyl chloride (PVC) and makes a Hub X Hub solvent-weld connection. Meets applicable ASTM standards. For use in non-pressurized underground sewer and drainage applications; maximum working pressure of 5 psi. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects-or we’ll replace it. NDS offers free tools such as the Home Drainage Center, Calculators, and NDS Stormwater Drainage mobile app to help make your project a success. Founded in 1972, NDS is the preferred choice of professionals and the leader in stormwater management solutions with proven products, tools, and support to help you get the job done right.

    Green checkmark of qualityEvery item checked for quality
    $9.51 $5.23

  • Advanced Drainage Systems 4 in. Singlewall External Snap Coupler

    Advanced Drainage Systems, Inc. (ADS) 4″ Single Wall External Coupler is the contractor’s choice for connecting two sections of 4″ single wall pipe. The coupler snaps over the ends of each section easily for a secure connection. Made of HDPE the 4″ external coupler is designed to last the life of the drainage system.

    Green checkmark of qualityEvery item checked for quality
    $4.73 $2.60

  • BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)

    BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. ID (3/8 in. OD).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00
X