Showing 1–9 of 64 results
-
#11, STRM006BN, Brushed Nickel Spiraled Single Lever Pull-Down Kitchen Faucet
$100.00 $55.00- Model: Star Mini Spring Pull Out Kitchen Mixer – STRM006BN.
- Function: Single Lever Pull-Down Kitchen Mixer/Faucet.
- Configuration: Single-Hole Installation.
- Finish: Brushed Nickel.
- Brand: Modern National.
- Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
- Installation Instructions are Included.
Every item checked for quality -
Everbilt 1/10 HP Non-Submersible Self-Priming Transfer Pump
$109.09 $60.00The Everbilt 1/10 HP non-submersible self-priming transfer pump is designed for portable and residential applications. It can drain or remove water from window wells, clogged sinks, basements, water basins, stock tanks, boats, fish tanks, water heaters, swimming pool covers, low spots in yards, or other flooded areas. It is not approved for use in swimming pools or in salt-water marine areas.
- Includes 6 ft. suction hose, suction strainer, puddle strainer and a set of replacement motor brushes.
- Made of high strength, corrosion resistant materials for trouble free service for years.
- Pump clear water; do not pump fuel or other flammable liquids.
- Pump not intended to be permanently installed.
- Not intended for use in sewage or septic systems.
- To help prolong the life of the impeller, before each use it is recommended to fill the motor housing with 1-2 teaspoons of water or vegetable oil.
- Maximum discharge head of 48 ft.
- Motor is fan cooled and thermally protected.
- 8.36 ft. power cord.
Every item checked for quality -
Charlotte Pipe 3 in. DWV PVC Double Sanitary Tee
$25.25 $13.89PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems. To be installed with solvent cementing, threading, flanging, and roll-grooved joining. All Charlotte Pipe products are manufactured in the USA.
Every item checked for quality -
#5, BrassCraft 1/2 in. FIP Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve
$5.45 $3.00
Gain control of your household plumbing fixtures with this BrassCraft 1/2 in. FIP Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve. Stop the water flow with the 90 degree water handle design and you can perform maintenance and repair without shutting off the water to the entire home. he straight valve is most often used where the water pipe enters the room from the floor.
- Compatible with iron pipe.
- Smooth on/off flow control with a quarter turn (90°) turn of the handle.
- Smooth on/off flow control with a quarter turn (90°) turn of the handle.
- Easy to install.
- 1-piece body construction for strength, durability and long-lasting performance.
- Chrome-plated brass.
- Temperature rating: 40° to 160°F.
- Pressure rating: 125 psi maximum.
- No-lead certified.
- IAPMO and CSA listed to ASME A112,18,1/CSA B125,1.
Every item checked for quality -
Apollo 1 in. x 1 in. x 1/2 in. Brass PEX-A Expansion Barb Reducing Tee
$14.27 $7.85The Apollo ExpansionPEX 1 in. x 1 in. x 1/2 in. Brass PEX-A Barb Reducing Tee is simple to install. Apollo ExpansionPEX barb fittings are a key component to one of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo ExpansionPEX couplings must be secured into place with Apollo ExpansionPEX sleeves or comparable expansion-type sleeve or ring (all sold separately). The Apollo ExpansionPEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Individually bagged.
- Larger internal diameter of Apollo ExpansionPEX fittings results in a 25% greater flow rate within the system.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength.
- Cold-expansion tool (sold separately) is required for installation.
- Meets or exceeds ASTM F1960 standard.
- Meets UPC, IPC and cUPC standard.
- Barb x Barb x Barb connection for PEX-A plumbing systems.
- NSF listed.
- Rated to 200 degree F and 200 psi.
- Item is not compatible with PEXb pipe, crimp-style (ASTM 1807) or pinch clamp (ASTM F2098) piping systems.
Every item checked for quality -
SharkBite 1/2 in. Push-to-Connect x 1/2 in. Push-to-Connect x 3/8 in. Compression Chrome-Plated Brass Service Stop Tee
$25.67 $14.12SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.
- Works on wet lines, rotatable after installation, and removable.
- Push-to-connect fittings are ideal for installation in tight spaces.
- Rated to 160 degrees Fahrenheit and 125 PSI.
- Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry.
- Chrome-plated exterior body.
- Low-lead DZR corrosion-resistant brass body.
- Code approved, IAPMO listed, for details see Specifications.
- Corrosion resistant to improve longevity.
- Listed by IAPMO and designed and certified to ASSE 1061, ASME A112.18.1/CSA B125.1, NSF/ANSI 61 and NSF/ANSI 372 product standards.
- Meets all UPC, IPC and cUPC requirements.
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately).
- 1/2 in Pipe Insertion Depth = 15/16 in.
Every item checked for quality -
Sharkbite Prolock 1 In. Push-To-connect Plastic 90-Degree Elbow Fitting Pro Pack (3-Pack)
$28.96 $15.93SharkBite ProLock fittings are a versatile and innovative full-flow plumbing system utilizing push lock fitting technology and engineered specifically for use with SharkBite PE-RT and PEX pipe. The SharkBite 1 in. Push-to-Connect 90° Elbow intuitive design makes for one of the simplest and most dependable fittings on the market. No tools are required to make a connection. They use a collet with stainless steel teeth that grips the pipe when fully inserted, and an EPDM O-Ring to provide a permanent, leak-proof seal. The Twist-to-lock technology ensures maximum security. When twisted into place with indicator arrows aligned, the locking cap locks the pipe in place and creates an audible click. Removing a SharkBite fitting is just as easy with no tools needed; simply twist the cap turn counterclockwise to unlock then depress collet against the fitting to remove the pipe. ProLock fittings are suitable for hot and cold potable water and hydronic heating applications. They have been specifically designed for the Professional Plumber. Code approved for behind-the-wall installations.
Every item checked for quality -
KOHLER 2 in. Toilet Flush Valve Kit
$19.87 $10.93This flush valve was designed by KOHLER engineers to maintain original product performance and promote product longevity. Replace your old or leaky flush valve with an OEM KOHLER part.
- Canister flush valve kit for KOHLER cimarron toilets.
- 3 in. canister with a 2 in. base.
- Compatible with tank model numbers K-4369 and K-4418.
- Look inside the back wall of the toilet tank to identify tank model number.
- Quick connect.
- Complete assembly with tank-to-bowl gasket.
- Maximizes performance.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector (1/2 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (85,000 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality
