Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home

Category: Plumbing

Showing 1–9 of 64 results

Filters

  • #9, STRM005BN, Pull Down Kitchen Faucet in Brushed Nickel

    • Model: Star Mini Pull-Out Kitchen Mixer – STRM005BN.
    • Function: Single Lever Pull-Down Kitchen Mixer/Faucet.
    • Configuration: Single-Hole Installation.
    • Finish: Brushed Nickel.
    • Brand: Modern National.
    • Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
    • Installation Instructions are Included.
    Green checkmark of qualityEvery item checked for quality
    $100.00 $55.00

  • BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve, #73

    BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.

    • Compatible with PEX, copper and CPVC.
    • Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
    • Installation ready: requires no special tools, soldering or glue for a watertight seal.
    • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Pre-inserted tube stiffener is “installation ready” for a faster connection.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • Chrome-plated brass.
    • Temperature rating: 40° to 160°F.
    • Pressure rating: 125 psi maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • Everbilt 1/10 HP Non-Submersible Self-Priming Transfer Pump

    The Everbilt 1/10 HP non-submersible self-priming transfer pump is designed for portable and residential applications. It can drain or remove water from window wells, clogged sinks, basements, water basins, stock tanks, boats, fish tanks, water heaters, swimming pool covers, low spots in yards, or other flooded areas. It is not approved for use in swimming pools or in salt-water marine areas.

    • Includes 6 ft. suction hose, suction strainer, puddle strainer and a set of replacement motor brushes.
    • Made of high strength, corrosion resistant materials for trouble free service for years.
    • Pump clear water; do not pump fuel or other flammable liquids.
    • Pump not intended to be permanently installed.
    • Not intended for use in sewage or septic systems.
    • To help prolong the life of the impeller, before each use it is recommended to fill the motor housing with 1-2 teaspoons of water or vegetable oil.
    • Maximum discharge head of 48 ft.
    • Motor is fan cooled and thermally protected.
    • 8.36 ft. power cord.
    Green checkmark of qualityEvery item checked for quality
    $109.09 $60.00

  • Everbilt 40/60 Pressure Switch for Well Pumps

    This pressure switch signals the pump to start when the water system drops to 40 psi (factory set) and stops at 60 psi (factory set). This switch is to be used with submersible well or jet pumps. It can be wired 115-Volt or 230-Volt. This switch must be used in conjunction with a well pressure tank. The air pressure in the well tank, when empty of all water, must be set to 38 psi or the switch will not operate properly.

    • Turns pump on at 40 psi, off at 60 psi.
    • Cap removes for easy adjustment.
    • Can be wired 115-Volt or 230-Volt.
    • For use with submersible well or jet pumps.
    • Motor wires are connected to the 2 middle posts (color does not matter).
    • Breaker box wires are connected to 2 outside posts (color does not matter).
    • 2-spring design allows for adjustment of cut-in and cut-out pressure settings.
    • Adjustments to springs should only be made by users with good knowledge of well systems.
    Green checkmark of qualityEvery item checked for quality
    $27.80 $15.29

  • SharkBite 1/2 in. Push-to-Connect x 1/2 in. Push-to-Connect x 3/8 in. Compression Chrome-Plated Brass Service Stop Tee

    SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

    • Works on wet lines, rotatable after installation, and removable.
    • Push-to-connect fittings are ideal for installation in tight spaces.
    • Rated to 160 degrees Fahrenheit and 125 PSI.
    • Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry.
    • Chrome-plated exterior body.
    • Low-lead DZR corrosion-resistant brass body.
    • Code approved, IAPMO listed, for details see Specifications.
    • Corrosion resistant to improve longevity.
    • Listed by IAPMO and designed and certified to ASSE 1061, ASME A112.18.1/CSA B125.1, NSF/ANSI 61 and NSF/ANSI 372 product standards.
    • Meets all UPC, IPC and cUPC requirements.
    • Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately).
    • 1/2 in Pipe Insertion Depth = 15/16 in.
    Green checkmark of qualityEvery item checked for quality
    $25.67 $14.12

  • BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)

    BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. ID (3/8 in. OD).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • KOHLER 2 in. Toilet Flush Valve Kit

    This flush valve was designed by KOHLER engineers to maintain original product performance and promote product longevity. Replace your old or leaky flush valve with an OEM KOHLER part.

    • Canister flush valve kit for KOHLER cimarron toilets.
    • 3 in. canister with a 2 in. base.
    • Compatible with tank model numbers K-4369 and K-4418.
    • Look inside the back wall of the toilet tank to identify tank model number.
    • Quick connect.
    • Complete assembly with tank-to-bowl gasket.
    • Maximizes performance.
    Green checkmark of qualityEvery item checked for quality
    $19.87 $10.93

  • Everbilt 3/4 in. Compression x 3/4 in. MIP Brass Adapter Fitting

    Use these Camco 3/4 in. x 3/4 in. brass compression fittings for evaporative coolers to create a watertight connection at the end of an evaporative cooler pipe and fitting. Measurement is 3.63 in. in width and 5.5 in. in height. No solder or adhesives are needed for installation.

    • Compatible with most evaporative cooler pipes measuring 3/4 in. x 3/4 in.
    • Watertight fit.
    • Durable brass construction.
    • Used to create a watertight connection between a pipe, fitting and evaporative cooler.
    • Installs easily without solder or adhesives.
    Green checkmark of qualityEvery item checked for quality
    $12.98 $7.14

  • Everbilt 30/50 Low Pressure Switch For Well Pumps

    This pressure switch signals the pump to start when the water system drops to 30 PSI (factory set) and stops at 50 PSI (factory set). This switch is to be used with submersible well or jet pumps. It can be wired 115-Volt or 230-Volt. This switch must be used in conjunction with a well pressure tank. The air pressure in the well tank, when empty of all water, must be set to 28 PSI, or the switch will not operate properly. This switch is equipped with a low-level cut-off arm that automatically shuts off a well pump when there is a dramatic decrease in pressure, such as a leak in the discharge pipes or a faulty pressure tank.

    • Turns pump on at 30 psi, off at 50 psi.
    • Cap removes for easy adjustment.
    • Can be wired 115-Volt or 230-Volt.
    • For use with submersible well or jet pumps.
    • Motor wires are connected to the 2 middle posts (color does not matter).
    • Breaker box wires are connected to 2 outside posts (color does not matter).
    • 2-spring design allows for adjustment of cut-in and cut-out pressure settings.
    • Adjustments to springs should only be made by users with good knowledge of well systems.
    • Switch shuts off pump automatically when there is a dramatic decrease in pressure.
    Green checkmark of qualityEvery item checked for quality
    $30.82 $16.95
X