Showing 1–9 of 52 results
-
Delta Universal Seats and Springs Repair Kit
$5.98 $3.29Repair leaks in your bathroom or kitchen faucet with the Delta Universal Seats and Springs Repair Kit. The kit is compatible with Delta faucets that have stainless-steel ball valves (faucets and ball valves not included).
- Use in Delta faucets with stainless-steel ball valves (faucets and ball valves not included).
- Repairs leaks in kitchen faucets.
- Can be used to repair leaks in bath faucets.
- Includes 1 set of seats and springs.
- Genuine Delta repair kit.
Every item checked for quality -
Apollo 1/2 in. x 1/2 in. CPVC CTS Slip Stainless Steel MPT Adapter
$6.58 $3.62The Apollo 1/2 in. CPVC x Male Threaded Transition Adapter is simple to install and is designed for transitioning from CPVC to alternative piping systems. It is designed for use within hot and cold water pressure piping systems in all commercial and residential applications. The CPVC x Male Threaded Transition Adapter features a female solvent weld socket and a male threaded stainless steel connection. The fitting is used in applications where a change in the piping material is necessary.
- Compatible with CPVC pipe.
- Solvent weld slip x stainless steel male pipe thread (MPT) connection.
- Not compatible with gases or compressed air.
- Used to transition from CPVC piping system to alternative piping systems.
- NSF Listed.
- Meets UPC, IPC and cUPC standard.
Every item checked for quality -
Cash Acme 3/8 in. Compression HG-135 Thermostatic Mixing Valve with Compression Tee
$78.40 $43.12The HG135 is a sleek and compact point of use mixing valve designed to assist in the prevention of scalding. It features a superior, fast acting thermostatic element that provides stable operation at flow rates as low as 0.25 gm (0.95 pm). The Heatguard 135 also reduces the outlet flow to a trickle in the event of a cold water supply failure. The valve inlets and outlet connections are standard 3/8″ supply line compression connections for use with 3/8 in. OD tube. The inlets of the valve feature check valves to prevent cross contamination as well as serviceable strainer screens to prevent the valve from being clogged with dirt or debris. Each valve includes a purpose built mounting bracket and hardware to neatly and securely fasten the valve to the wall. The compact design and pleasant aesthetics allow for this valve to easily be fit under or behind a single basin. Adjustable outlet temperature range: 100°-120°F (38°-49°C).
- Intended for point of use/under sink installations to provide safe outlet water temperature.
- Ideal for individual faucets and electronic faucets.
- ASSE 1070 approved.
- Listed by ASSE, CSA, IAPMO.
- Accurate temperature control with flows as low as 0.25 gpm.
- Robust, low complexity design and total flow shut-off if cold supply fails.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (60,500 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality -
Sharkbite Prolock 1 In. Push-To-connect Plastic 90-Degree Elbow Fitting Pro Pack (3-Pack)
$28.96 $15.93SharkBite ProLock fittings are a versatile and innovative full-flow plumbing system utilizing push lock fitting technology and engineered specifically for use with SharkBite PE-RT and PEX pipe. The SharkBite 1 in. Push-to-Connect 90° Elbow intuitive design makes for one of the simplest and most dependable fittings on the market. No tools are required to make a connection. They use a collet with stainless steel teeth that grips the pipe when fully inserted, and an EPDM O-Ring to provide a permanent, leak-proof seal. The Twist-to-lock technology ensures maximum security. When twisted into place with indicator arrows aligned, the locking cap locks the pipe in place and creates an audible click. Removing a SharkBite fitting is just as easy with no tools needed; simply twist the cap turn counterclockwise to unlock then depress collet against the fitting to remove the pipe. ProLock fittings are suitable for hot and cold potable water and hydronic heating applications. They have been specifically designed for the Professional Plumber. Code approved for behind-the-wall installations.
Every item checked for quality -
2-Piece Pack: NIBCO 3/4 in. x 3/4 in. CPVC-CTS 90-Degree Slip x Slip Elbow Fitting
$1.82 $1.002-Piece Pack! Model/Part #C470734. Suited for hot and cold water pressure distribution systems, this 90° slip x slip elbow features female socket connections and is used to easily change the direction of flow. Chlorinated Polyvinyl Chloride (CPVC) has proven to be an excellent material for hot corrosive liquids, hot and cold water distribution, and similar applications above the temperature range of PVC. CPVC will not rust, pit, scale or corrode. CPVC fittings are easy to install and are joined by solvent cementing or threading.
Every item checked for quality -
Apollo 3/4 In. X 3/4 In. Pvc Schedule 40 Slip X Slip Ball Valve Pro Pack (12-Pack)
$18.18 $10.00PVC Sch. 40 Ball Valves are compact and lightweight. This Slip x Slip valve is designed for a variety of applications including pressure distribution of cold water in irrigation, pool, spa, agricultural, commercial and light industrial applications and comes in a plastic jar of 12 valves which is convenient, resealable, and reusable. The ball valves are NSF approved and have EPDM seats and O-rings integrated into the durable PVC body.
- PVC schedule 40 construction for durability.
- Full port design allows for maximum efficiency and minimal turbulence or pressure reduction.
- Quarter-turn flow control for easy on and off.
- NSF / ANSI standard 372 certified.
- Slip connections conform to ASTM D2467.
- Working temperature range: 41°F to 122°F (5°C to 55°C).
- Maximum pressure rating 150 psi at 73°F (22°C).
- Requires solvent cement for installation (not included).
- Please note – as temperature increases, working pressure decreases, the optimal working pressure for PVC valves is 150 psi at 73°F (22°C) if the temperature increases above 73°F (22°C), use the PVC. correction factor to determine working pressure, multiply the maximum working pressure by the correction factor, please see correction factor grid on the attached specification sheet.
Every item checked for quality -
Apollo 1 in. x 1 in. x 1/2 in. Brass PEX-A Expansion Barb Reducing Tee
$14.27 $7.85The Apollo ExpansionPEX 1 in. x 1 in. x 1/2 in. Brass PEX-A Barb Reducing Tee is simple to install. Apollo ExpansionPEX barb fittings are a key component to one of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo ExpansionPEX couplings must be secured into place with Apollo ExpansionPEX sleeves or comparable expansion-type sleeve or ring (all sold separately). The Apollo ExpansionPEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Individually bagged.
- Larger internal diameter of Apollo ExpansionPEX fittings results in a 25% greater flow rate within the system.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength.
- Cold-expansion tool (sold separately) is required for installation.
- Meets or exceeds ASTM F1960 standard.
- Meets UPC, IPC and cUPC standard.
- Barb x Barb x Barb connection for PEX-A plumbing systems.
- NSF listed.
- Rated to 200 degree F and 200 psi.
- Item is not compatible with PEXb pipe, crimp-style (ASTM 1807) or pinch clamp (ASTM F2098) piping systems.
Every item checked for quality -
FitRite 21 in. x 15 in. Backflow Valve Cover
$27.47 $15.11The FitRite Insulated Backflow/RP Cover ensures you’re ready for the cold weather. 21 in. in length, the 2-1/4 in. in width and 15 in. in height is spacious enough to cover your valve and secure it there for the Winter. The valve cover is a sleek black and is for use as an irrigation system accessory.
- Backflow valve cover.
- Irrigation system accessory.
- 21 in. length, 2-1/4 in. width, 15 in. height.
- Black color.
- Easy installation, installs in seconds.
- Extends your watering season.
- Fits most backflow assemblies.
- Durable weatherproof material, UV and cold resistant.
- Allows backflow devices to function properly.
- Made for virtually all brands of PVB’s and RP’s.
Every item checked for quality
