Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
    2. Page 2

Category: Plumbing

Showing 10–18 of 52 results

Filters

  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. I.D. (3/8 in. O.D.).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • Swiss Madison 0.8/1.28 GPF Wall Mount Dual Flush Actuator Push Button Plate in White

    Wall Mount Actuator Flush Push Button Plate in White. This Actuator plate fits with All Swiss Madison Concealed Wall Carriers for use with our wall hung toilets. It features 2 buttons for dual flush compatibility and is very easy to clean.

    • Easy to use.
    • Plate clips off for easy access to the inner tank and to speedy valve.
    • Simple to clean.
    • Installation is a snap.
    • Easy to clean.
    • Actuator plate compatible with Swiss Madison dual flush systems.
    Green checkmark of qualityEvery item checked for quality
    $22.87 $12.58

  • NDS PVC Adapter, 4 in. DWV/SCH40 Hub X S&D Hub

    Connect 4 in. Drain Waste Vent (DWV)/Schedule 40 (SCH40) pipe to 4 in. Sewer and Drain (S&D) pipe with the PVC Adapter. The drain fitting also connects 4 in. DWV/SCH40 pipe to select drainage products compatible with 4 in. S&D connections such as channel drain outlets, drainage grates, and pop-up emitters. This adapter is used to connect two different pipe types. The adapter is made of polyvinyl chloride (PVC) and makes a Hub X Hub solvent-weld connection. Meets applicable ASTM standards. For use in non-pressurized underground sewer and drainage applications; maximum working pressure of 5 psi. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects-or we’ll replace it. NDS offers free tools such as the Home Drainage Center, Calculators, and NDS Stormwater Drainage mobile app to help make your project a success. Founded in 1972, NDS is the preferred choice of professionals and the leader in stormwater management solutions with proven products, tools, and support to help you get the job done right.

    Green checkmark of qualityEvery item checked for quality
    $9.51 $5.23

  • Charlotte Pipe 4 in. x 4 in. x 1-1/2 in. PVC DWV Wye Reducing

    PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140F. PVC is lightweight and easy to install. They require no special tools for cutting and can be installed with solvent cementing, threading, flanging and roll-grooved joining.

    Green checkmark of qualityEvery item checked for quality
    $38.82 $21.35

  • BrassCraft Safety+PLUS2 Thermal Excess Flow valve (36,800 BTU) 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector

    BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. ID (3/8 in. OD).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • HOME-FLEX 1/2 in. CSST x 1/2 in. FIPT Brass Female Adapter

    The HOME-FLEX Female Adapter allows you to quickly affix a CSST system to a gas source. Used to attach CSST directly to Steel Pipe. Can attach CSST either the beginning or end of a CSST system.

    • Very high quality brass construction.
    • 1/2 in. diameter.
    • For use with HOME-FLEX CSST systems.
    • For use with natural gas or liquid propane.
    • CSA and IAPMO certified.
    • Not for use with Home Flex UNDERGROUND poly tubing.
    • HOME-FLEX Corrugated Stainless Steel Tubing (CSST) flexible gas piping material must be installed by a qualified installer who has been certified in the use of the HOME-FLEX gas piping system.
    • Some areas of the United States do not allow installation of CSST for fuel gas piping systems. It is the installer’s responsibility to check and understand all codes governing the location of installation prior to installing HOME-FLEX CSST.
    • CSST is generally for indoor use; however, it can be used outdoors and/or underground with very specific parameters.
    Green checkmark of qualityEvery item checked for quality
    $10.13 $5.57

  • #2, STRM005CR, Chrome Single Lever Pull-Down Kitchen Faucet

    • Model: Star Mini Pull-Out Kitchen Mixer – STRM005CR.
    • Function: Single Lever Pull-Down Kitchen Mixer/Faucet.
    • Configuration: Single-Hole Installation.
    • Finish: Chrome.
    • Brand: Modern National.
    • Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
    • Installation Instructions are Included.
    Green checkmark of qualityEvery item checked for quality
    $100.00 $55.00

  • Sharkbite Prolock 1 In. Push-To-connect Plastic 90-Degree Elbow Fitting Pro Pack (3-Pack)

    SharkBite ProLock fittings are a versatile and innovative full-flow plumbing system utilizing push lock fitting technology and engineered specifically for use with SharkBite PE-RT and PEX pipe. The SharkBite 1 in. Push-to-Connect 90° Elbow intuitive design makes for one of the simplest and most dependable fittings on the market. No tools are required to make a connection. They use a collet with stainless steel teeth that grips the pipe when fully inserted, and an EPDM O-Ring to provide a permanent, leak-proof seal. The Twist-to-lock technology ensures maximum security. When twisted into place with indicator arrows aligned, the locking cap locks the pipe in place and creates an audible click. Removing a SharkBite fitting is just as easy with no tools needed; simply twist the cap turn counterclockwise to unlock then depress collet against the fitting to remove the pipe. ProLock fittings are suitable for hot and cold potable water and hydronic heating applications. They have been specifically designed for the Professional Plumber. Code approved for behind-the-wall installations.

    Green checkmark of qualityEvery item checked for quality
    $28.96 $15.93

  • Apollo 1 in. PEX-A Expansion Sleeve/Ring (25-Pack)

    The Apollo ExpansionPEX 1 in. PEX-A Expansion Sleeve (25-Pack) is simple to install. Apollo ExpansionPEX are produced using PEX-A material. Apollo ExpansionPEX are required to create a secure Apollo ExpansionPEX connection. Apollo ExpansionPEX Expansion Sleeves are engineered with a bevel along the leading edge to ease pipe insertion and an integrated stop to ensure proper placement of the sleeve. The Apollo ExpansionPEX system is a comprehensive cold expansion piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

    • Designed for use with Apollo ExpansionPEX fittings and pipe and is compatible with all expansion type (ASTM F1960) systems.
    • Designed for use with 1 in. PEX-A pipe and 1 in. PEX-A barb fittings.
    • Pro pack includes 25 sleeves.
    • Requires expansion tool (sold separately) for use.
    • For use exclusively with PEX-A (ASTM F1960) pipe and systems.
    • Meets or exceeds ASTM F1960 and ASTM F877 standards.
    • Meets UPC, IPC and cUPC standard.
    • Rated to 200F and 200 psi.
    Green checkmark of qualityEvery item checked for quality
    $16.38 $9.01
X