Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
    2. Page 3

Category: Plumbing

Showing 19–27 of 52 results

Filters

  • Squared, 4-inch Single Handle Bathroom Faucet in Chrome

    • Model: A-DIL001 – Dillion Basin Mixer.
    • Function: Single Lever Bathroom Mixer/Faucet.
    • Configuration: Single-Hole Installation.
    • Finish: Chrome.
    • Dimensions: 175 mm H x 156 mm D (6.889 in. H x 6.141 in. D)
    • Brand: Modern National.
    • Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
    Green checkmark of qualityEvery item checked for quality
    $90.91 $50.00

  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (71,100 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCrafts stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • Advanced Drainage Systems 4 in. Singlewall External Snap Coupler

    Advanced Drainage Systems, Inc. (ADS) 4″ Single Wall External Coupler is the contractor’s choice for connecting two sections of 4″ single wall pipe. The coupler snaps over the ends of each section easily for a secure connection. Made of HDPE the 4″ external coupler is designed to last the life of the drainage system.

    Green checkmark of qualityEvery item checked for quality
    $4.73 $2.60

  • FitRite 21 in. x 16.5 in. Backflow Valve Cover

    The FitRite Insulated Backflow/RP Cover ensures you’re ready for the cold weather. 21 in. in length, the 2-1/4 in. in width and 16.5 in. in height is spacious enough to cover your valve and secure it there for the Winter. The valve cover is a sleek black and is for use as an irrigation system accessory.

    • Backflow valve cover.
    • Irrigation system accessory.
    • 21 in. length, 2-1/4 in. width, 16.5 in. height.
    • Black color.
    • Easy installation, installs in seconds.
    • Extends your watering season.
    • Fits most backflow assemblies.
    • Durable weatherproof material, UV and cold resistant.
    • Allows backflow devices to function properly.
    • Made for virtually all brands of PVB’s and RP’s.
    Green checkmark of qualityEvery item checked for quality
    $27.47 $15.11

  • SharkBite 1/2 in. Brass Push-to-Connect Dishwasher Installation Kit

    The SharkBite Dishwasher Installation Kit has everything you need to install your new dishwasher, it’s fast and simple. Push-to-Connect fittings require no glue, soldering, unions or tools. The kit includes 1 SharkBite 1/2 in. Dual Outlet Angle Stop Valve, 1 SharkBite 1/4 in. x 3/4 in. MPT Elbow, 1 SharkBite 1/4 in. x 3/4 in. GHT Elbow, 1 SharkBite 1/4 in. Stop Valve Adapter, 10 ft. coil of 1/4 in. PEX Pipe, 2 Disconnect Clips (1/2 in. and 1/4 in.). The SharkBite Dual Outlet Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up behind the dishwasher.

    • Lead free DZR brass construction for durability and reliability.
    • Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes.
    • Innovative push-to-connect design makes for quick and easy installation.
    • Push-to-connect fittings require no solder, glue, unions, or tools.
    • Fitting can be rotated on pipe after installation making it easier to work in tight spaces.
    • Designed for potable water distribution as well as hydronic heating applications.
    • Corrosion resistant to improve longevity.
    • Certified as a manufactured joint and for underground and behind-the-wall applications without access panels.
    • Meets all UPC, IPC and cUPC requirements.
    • Demount clip allows user to release the fitting from the pipe for convenient installation flexibility.
    • Rated to 200°F and 200 psi.
    • Rated to 200°F and 200 psi.
    Green checkmark of qualityEvery item checked for quality
    $36.36 $20.00

  • BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)

    BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. ID (3/8 in. OD).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • BrassCraft 1/2 in. Nom Push Connect x 7/8 in. Ballcock x 12 in. SpeediOne Braided Toilet Connector and 1/4-Turn Straight Valve

    Original Retail Price: $17.75.

    BrassCraft has created an easy-to-install, one-piece connection. By combining our trusted bass supply stops with our dependable braided, vinyl and stainless steel connector – the results is a quick and easy installation. One-piece connectors are available in a wide variety of options for faucet, toilet and dishwasher applications.

    • Connector is constructed with flexible braided polymer; stop is chrome plated brass.
    • 1/2 in. nominal push connect x 1/2 in. FIP.
    • No special installation tools required.
    • Use in hot or cold water applications.
    • Durable, flexible water connector requires no cutting or soldering during installation.
    • Compatible with copper, PEX, and CPVC.
    • Remove with combination removal tool or 5/8 in. open end wrench.
    • Connector bends freely without kinking or crimping in tight quarters.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $3.64 $2.00

  • Apollo 1 in. PEX-A Expansion Sleeve/Ring (25-Pack)

    The Apollo ExpansionPEX 1 in. PEX-A Expansion Sleeve (25-Pack) is simple to install. Apollo ExpansionPEX are produced using PEX-A material. Apollo ExpansionPEX are required to create a secure Apollo ExpansionPEX connection. Apollo ExpansionPEX Expansion Sleeves are engineered with a bevel along the leading edge to ease pipe insertion and an integrated stop to ensure proper placement of the sleeve. The Apollo ExpansionPEX system is a comprehensive cold expansion piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

    • Designed for use with Apollo ExpansionPEX fittings and pipe and is compatible with all expansion type (ASTM F1960) systems.
    • Designed for use with 1 in. PEX-A pipe and 1 in. PEX-A barb fittings.
    • Pro pack includes 25 sleeves.
    • Requires expansion tool (sold separately) for use.
    • For use exclusively with PEX-A (ASTM F1960) pipe and systems.
    • Meets or exceeds ASTM F1960 and ASTM F877 standards.
    • Meets UPC, IPC and cUPC standard.
    • Rated to 200F and 200 psi.
    Green checkmark of qualityEvery item checked for quality
    $16.38 $9.01

  • Woodford 1/2 in. x 1/2 in. Brass Sweat x MPT x 8 in. L Freeze-Resistant Anti-Rupture Sillcock Valve

    This Woodford Manufacturing Company 1/2 in. x 1/2 in. Brass Sweat x MPT Model 19 anti-rupture sillcock with 8 in. L features a resetting pressure relief valve (PRV) that prevents the faucet tube from rupturing during freezing temperatures, even if a hose is inadvertently connected to the faucet. Use for year-round residential irrigation purposes regardless of the outside temperature. Woodford, The Choice of Professionals.

    • Anti-siphon protection.
    • Integral backflow device protects up to 125 psi of backpressure, eliminating the need for an add-on vacuum breaker.
    • EPDM rubber packing helps prevent leaking behind the packing nut.
    • Stainless-steel seat to help prevent wire draw.
    • Full-circle operating threads on the valve body and retainer for a secure fit.
    • Powder-coated die-cast aluminum oval handle for strength.
    • Standard O size seat washer.
    • Adjustable polycarbonate wall flange.
    • No-lead solder.
    • Brass construction.
    • 8 in. wall thickness plus the 1 1/4 in. inlet = 9 1/4 in. from the back of the faucet.
    Green checkmark of qualityEvery item checked for quality
    $70.00 $38.50
X