Showing 28–36 of 52 results
-
Wilkins 3/4 in. Lead Free Brass NPT Pressure Relief Valve
$37.40 $20.57The P1000AXL-150C Pressure Relief Valve is set at 150 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.
- Eliminates risk of over-pressure of storage tanks.
- Epoxy-coating adds extra protection.
- Pressure relief valve set at 150 psi.
- CSA Compliance to ANSI Z21.22/CSA 4.4.
- Certified to ASME Section IV by National Board.
- Pressure relief valve settings of 30, 75, 125, and 150 psi offer versatility.
Every item checked for quality -
Arrowhead Brass Chrome Fine Thread Self Draining Vacuum Breaker
$24.98 $13.74The VPC PK1390 is a replacement self-draining vacuum breaker for frost free hydrants with FINE THREADS (will not connect to hose threaded faucet). A must on all outdoor systems. It can easily be adapted with new installs or existing systems.
- Red brass construction, nickel plated for protection from extreme weather.
- Drains water from faucet upon shut off.
- For replacing leaking vacuum breakers on fine threaded hose-bibs and sillcocks.
- Red brass with 80-83% copper content.
- For outdoor use; not for potable water.
- ASSE 1019 approved; IAMPO certified.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (3/8 in. O.D.) w/Safety+Plus2 Thermal Excess Flow Valve (33,400 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- The Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
NDS PVC Adapter, 4 in. DWV/SCH40 Hub X S&D Hub
$9.51 $5.23Connect 4 in. Drain Waste Vent (DWV)/Schedule 40 (SCH40) pipe to 4 in. Sewer and Drain (S&D) pipe with the PVC Adapter. The drain fitting also connects 4 in. DWV/SCH40 pipe to select drainage products compatible with 4 in. S&D connections such as channel drain outlets, drainage grates, and pop-up emitters. This adapter is used to connect two different pipe types. The adapter is made of polyvinyl chloride (PVC) and makes a Hub X Hub solvent-weld connection. Meets applicable ASTM standards. For use in non-pressurized underground sewer and drainage applications; maximum working pressure of 5 psi. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects-or we’ll replace it. NDS offers free tools such as the Home Drainage Center, Calculators, and NDS Stormwater Drainage mobile app to help make your project a success. Founded in 1972, NDS is the preferred choice of professionals and the leader in stormwater management solutions with proven products, tools, and support to help you get the job done right.
Every item checked for quality -
Charlotte Pipe 2 in. PVC DWV 22-1/2-Degree Hub x Hub Street Elbow Fitting
$5.31 $2.92PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140°F. PVC is lightweight and easy to install. They require no special tools for cutting, and can be installed with solvent cementing, threading, flanging, and roll-grooved joining.
Every item checked for quality -
Apollo 3/4 in. Brass PEX-B Barb x 3/4 in. Male Pipe Thread Adapter (5-Pack)
$16.45 $9.05The ApolloPEX 3/4 in. Brass PEX Barb x 3/4 in. Male Pipe Thread Adapter is simple to install. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX adapters can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Most economical piping system available.
- Meets UPC, IPC and cUPC standard.
- Can secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves.
- NSF listed.
- Barb x MIP connection for PEX plumbing systems.
- Maximum working pressure of 200 psi and maximum temperature of 200 degree F.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (71,100 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCrafts stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality -
HOME-FLEX 3/4 in. IPS DR 11 Underground Yellow Poly Gas Pipe 90-Degree Elbow
$27.27 $15.00The HOME-FLEX Underground Elbow allows you to safely and easily make a 90 turn. Simply cut the pipe, slide in the provided stiffener and slide into the fitting and tighten down. No special tools necessary.
- HOME-FLEX Underground compression fitting for IPS size MDPE Yellow Poly Gas Pipe. Includes stiffeners.
- Purpose-built for direct burial outside underground use only.
- HOME-FLEX Underground pipe and fittings should NEVER be used in a building and should NEVER be used under a foundation with a structure on it.
- No special tools or equipment required to fit to compatible sized yellow poly gas pipe.
- Easy to understand, straight-forward installation.
- IAPMO UPC certified to ASTM F1924.
- Constructed of durable polypropylene for years of service.
- Rated at 125 psi.
- Can be removed and re-installed.
- NOT for use with HOME-FLEX (or other) CSST (corrugated stainless steel tubing) products.
Every item checked for quality
