Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
    2. Page 4

Category: Plumbing

Showing 28–36 of 52 results

Filters

  • BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve, #73

    BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.

    • Compatible with PEX, copper and CPVC.
    • Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
    • Installation ready: requires no special tools, soldering or glue for a watertight seal.
    • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Pre-inserted tube stiffener is “installation ready” for a faster connection.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • Chrome-plated brass.
    • Temperature rating: 40° to 160°F.
    • Pressure rating: 125 psi maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • Sharkbite Prolock 1 In. Push-To-connect Plastic 90-Degree Elbow Fitting Pro Pack (3-Pack)

    SharkBite ProLock fittings are a versatile and innovative full-flow plumbing system utilizing push lock fitting technology and engineered specifically for use with SharkBite PE-RT and PEX pipe. The SharkBite 1 in. Push-to-Connect 90° Elbow intuitive design makes for one of the simplest and most dependable fittings on the market. No tools are required to make a connection. They use a collet with stainless steel teeth that grips the pipe when fully inserted, and an EPDM O-Ring to provide a permanent, leak-proof seal. The Twist-to-lock technology ensures maximum security. When twisted into place with indicator arrows aligned, the locking cap locks the pipe in place and creates an audible click. Removing a SharkBite fitting is just as easy with no tools needed; simply twist the cap turn counterclockwise to unlock then depress collet against the fitting to remove the pipe. ProLock fittings are suitable for hot and cold potable water and hydronic heating applications. They have been specifically designed for the Professional Plumber. Code approved for behind-the-wall installations.

    Green checkmark of qualityEvery item checked for quality
    $28.96 $15.93

  • #5, BrassCraft 1/2 in. FIP Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve

    Gain control of your household plumbing fixtures with this BrassCraft 1/2 in. FIP Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve. Stop the water flow with the 90 degree water handle design and you can perform maintenance and repair without shutting off the water to the entire home. he straight valve is most often used where the water pipe enters the room from the floor.

    • Compatible with iron pipe.
    • Smooth on/off flow control with a quarter turn (90°) turn of the handle.
    • Smooth on/off flow control with a quarter turn (90°) turn of the handle.
    • Easy to install.
    • 1-piece body construction for strength, durability and long-lasting performance.
    • Chrome-plated brass.
    • Temperature rating: 40° to 160°F.
    • Pressure rating: 125 psi maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112,18,1/CSA B125,1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • Pfister S60-151A 2-3/4 in. Zinc Die-Cast Crown Imperial Shower Flange with Sleeve in Chrome

    Flanges provides a decorative way to cover the stems of a faucet. S60-151A Crown Imperial Shower Flange is for use with new style Pfister shower valves. 2-piece design for easier installation.

    • 2-3/4 in. O.D.
    • Chrome finish.
    • Includes set screw.
    • Tube and flange design.
    • Genuine Pfister replacement part.
    • Internal threads to mount to stem.
    Green checkmark of qualityEvery item checked for quality
    $35.42 $19.48

  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (3/8 in. O.D.) w/Safety+Plus2 Thermal Excess Flow Valve (33,400 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. I.D. (3/8 in. O.D.).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • The Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • NDS PVC Adapter, 4 in. DWV/SCH40 Hub X S&D Hub

    Connect 4 in. Drain Waste Vent (DWV)/Schedule 40 (SCH40) pipe to 4 in. Sewer and Drain (S&D) pipe with the PVC Adapter. The drain fitting also connects 4 in. DWV/SCH40 pipe to select drainage products compatible with 4 in. S&D connections such as channel drain outlets, drainage grates, and pop-up emitters. This adapter is used to connect two different pipe types. The adapter is made of polyvinyl chloride (PVC) and makes a Hub X Hub solvent-weld connection. Meets applicable ASTM standards. For use in non-pressurized underground sewer and drainage applications; maximum working pressure of 5 psi. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects-or we’ll replace it. NDS offers free tools such as the Home Drainage Center, Calculators, and NDS Stormwater Drainage mobile app to help make your project a success. Founded in 1972, NDS is the preferred choice of professionals and the leader in stormwater management solutions with proven products, tools, and support to help you get the job done right.

    Green checkmark of qualityEvery item checked for quality
    $9.51 $5.23

  • #11, STRM006BN, Brushed Nickel Spiraled Single Lever Pull-Down Kitchen Faucet

    • Model: Star Mini Spring Pull Out Kitchen Mixer – STRM006BN.
    • Function: Single Lever Pull-Down Kitchen Mixer/Faucet.
    • Configuration: Single-Hole Installation.
    • Finish: Brushed Nickel.
    • Brand: Modern National.
    • Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
    • Installation Instructions are Included.
    Green checkmark of qualityEvery item checked for quality
    $100.00 $55.00

  • Swiss Madison 0.8/1.28 GPF Wall Mount Dual Flush Actuator Push Button Plate in White

    Wall Mount Actuator Flush Push Button Plate in White. This Actuator plate fits with All Swiss Madison Concealed Wall Carriers for use with our wall hung toilets. It features 2 buttons for dual flush compatibility and is very easy to clean.

    • Easy to use.
    • Plate clips off for easy access to the inner tank and to speedy valve.
    • Simple to clean.
    • Installation is a snap.
    • Easy to clean.
    • Actuator plate compatible with Swiss Madison dual flush systems.
    Green checkmark of qualityEvery item checked for quality
    $22.87 $12.58

  • #63, BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. OD Push Connect Outlet 1/4-Turn Straight Valve

    BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. OD Push Connect Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

    • Original retail price: $10.46.
    • 1-piece body construction provides strength, durability and long-lasting performance.
    • 1/2 in. nominal push connect x 3/8 in. OD push connect.
    • Compatible with copper, PEX or CPVC tubing.
    • For use in potable water distribution systems, not intended for recirculating water systems that produce continuous use temperatures above 115°F for those applications, use our KT series ball stops.
    • Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
    • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • Installation ready: requires no special tools, soldering to glue for a watertight seal.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00
X