Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
    2. Page 5

Category: Plumbing

Showing 37–45 of 52 results

Filters

  • SharkBite Push-to-Connect Faucet Installation Kit

    The SharkBite Faucet Installation Kit has everything you need to install your new faucet. The kit includes 2 SharkBite 1/2 in. x 1/4 in. (3/8 in. O.D.) Push-to-Connect Angle Stop Valves, two 5 ft. coils of 1/4 in. PEX Pipe, two 1/4 in. (3/8 in. O.D.) SharkBite x 1/2 in. Swivel Faucet Connectors, and a 1/2 in. Chrome Trim Cover reversed functions as a disconnect and 1/4 in. disconnect clip to remove the pipe from the fitting if needed. The SharkBite Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up under the sink providing a clean, tangle free look. Once the stop valves are installed, thread the 1/2 in. faucet connectors onto the faucet connections and then measure and cut the PEX and push into the outlet on the stop valve and the faucet connector and the installation is complete.

    Green checkmark of qualityEvery item checked for quality
    $36.36 $20.00

  • Advanced Drainage Systems 4 in. Singlewall External Snap Coupler

    Advanced Drainage Systems, Inc. (ADS) 4″ Single Wall External Coupler is the contractor’s choice for connecting two sections of 4″ single wall pipe. The coupler snaps over the ends of each section easily for a secure connection. Made of HDPE the 4″ external coupler is designed to last the life of the drainage system.

    Green checkmark of qualityEvery item checked for quality
    $4.73 $2.60

  • Charlotte Pipe 3 in. PVC DWV No Hub Adapter

    PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140°F. PVC is lightweight and easy to install. They require no special tools for cutting, and can be installed with solvent cementing, threading, flanging, and roll-grooved joining.

    Green checkmark of qualityEvery item checked for quality
    $7.62 $4.19

  • 2-Piece Pack: NIBCO 3/4 in. x 3/4 in. CPVC-CTS 90-Degree Slip x Slip Elbow Fitting

    2-Piece Pack! Model/Part #C470734. Suited for hot and cold water pressure distribution systems, this 90° slip x slip elbow features female socket connections and is used to easily change the direction of flow. Chlorinated Polyvinyl Chloride (CPVC) has proven to be an excellent material for hot corrosive liquids, hot and cold water distribution, and similar applications above the temperature range of PVC. CPVC will not rust, pit, scale or corrode. CPVC fittings are easy to install and are joined by solvent cementing or threading.

    Green checkmark of qualityEvery item checked for quality
    $1.82 $1.00

  • FitRite 21 in. x 15 in. Backflow Valve Cover

    The FitRite Insulated Backflow/RP Cover ensures you’re ready for the cold weather. 21 in. in length, the 2-1/4 in. in width and 15 in. in height is spacious enough to cover your valve and secure it there for the Winter. The valve cover is a sleek black and is for use as an irrigation system accessory.

    • Backflow valve cover.
    • Irrigation system accessory.
    • 21 in. length, 2-1/4 in. width, 15 in. height.
    • Black color.
    • Easy installation, installs in seconds.
    • Extends your watering season.
    • Fits most backflow assemblies.
    • Durable weatherproof material, UV and cold resistant.
    • Allows backflow devices to function properly.
    • Made for virtually all brands of PVB’s and RP’s.
    Green checkmark of qualityEvery item checked for quality
    $27.47 $15.11

  • BrassCraft 1/2 in. Nom Push Connect x 7/8 in. Ballcock x 12 in. SpeediOne Braided Toilet Connector and 1/4-Turn Straight Valve

    Original Retail Price: $17.75.

    BrassCraft has created an easy-to-install, one-piece connection. By combining our trusted bass supply stops with our dependable braided, vinyl and stainless steel connector – the results is a quick and easy installation. One-piece connectors are available in a wide variety of options for faucet, toilet and dishwasher applications.

    • Connector is constructed with flexible braided polymer; stop is chrome plated brass.
    • 1/2 in. nominal push connect x 1/2 in. FIP.
    • No special installation tools required.
    • Use in hot or cold water applications.
    • Durable, flexible water connector requires no cutting or soldering during installation.
    • Compatible with copper, PEX, and CPVC.
    • Remove with combination removal tool or 5/8 in. open end wrench.
    • Connector bends freely without kinking or crimping in tight quarters.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $3.64 $2.00

  • Apollo 1 in. PEX-A Expansion Sleeve/Ring (25-Pack)

    The Apollo ExpansionPEX 1 in. PEX-A Expansion Sleeve (25-Pack) is simple to install. Apollo ExpansionPEX are produced using PEX-A material. Apollo ExpansionPEX are required to create a secure Apollo ExpansionPEX connection. Apollo ExpansionPEX Expansion Sleeves are engineered with a bevel along the leading edge to ease pipe insertion and an integrated stop to ensure proper placement of the sleeve. The Apollo ExpansionPEX system is a comprehensive cold expansion piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

    • Designed for use with Apollo ExpansionPEX fittings and pipe and is compatible with all expansion type (ASTM F1960) systems.
    • Designed for use with 1 in. PEX-A pipe and 1 in. PEX-A barb fittings.
    • Pro pack includes 25 sleeves.
    • Requires expansion tool (sold separately) for use.
    • For use exclusively with PEX-A (ASTM F1960) pipe and systems.
    • Meets or exceeds ASTM F1960 and ASTM F877 standards.
    • Meets UPC, IPC and cUPC standard.
    • Rated to 200F and 200 psi.
    Green checkmark of qualityEvery item checked for quality
    $16.38 $9.01

  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (60,500 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • FitRite 21 in. x 16.5 in. Backflow Valve Cover

    The FitRite Insulated Backflow/RP Cover ensures you’re ready for the cold weather. 21 in. in length, the 2-1/4 in. in width and 16.5 in. in height is spacious enough to cover your valve and secure it there for the Winter. The valve cover is a sleek black and is for use as an irrigation system accessory.

    • Backflow valve cover.
    • Irrigation system accessory.
    • 21 in. length, 2-1/4 in. width, 16.5 in. height.
    • Black color.
    • Easy installation, installs in seconds.
    • Extends your watering season.
    • Fits most backflow assemblies.
    • Durable weatherproof material, UV and cold resistant.
    • Allows backflow devices to function properly.
    • Made for virtually all brands of PVB’s and RP’s.
    Green checkmark of qualityEvery item checked for quality
    $27.47 $15.11
X