Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
    2. Page 5

Category: Plumbing

Showing 37–45 of 52 results

Filters

  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (3/8 in. O.D.) w/Safety+Plus2 Thermal Excess Flow Valve (33,400 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. I.D. (3/8 in. O.D.).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • The Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • Woodford 1/2 in. x 1/2 in. Brass Sweat x MPT x 8 in. L Freeze-Resistant Anti-Rupture Sillcock Valve

    This Woodford Manufacturing Company 1/2 in. x 1/2 in. Brass Sweat x MPT Model 19 anti-rupture sillcock with 8 in. L features a resetting pressure relief valve (PRV) that prevents the faucet tube from rupturing during freezing temperatures, even if a hose is inadvertently connected to the faucet. Use for year-round residential irrigation purposes regardless of the outside temperature. Woodford, The Choice of Professionals.

    • Anti-siphon protection.
    • Integral backflow device protects up to 125 psi of backpressure, eliminating the need for an add-on vacuum breaker.
    • EPDM rubber packing helps prevent leaking behind the packing nut.
    • Stainless-steel seat to help prevent wire draw.
    • Full-circle operating threads on the valve body and retainer for a secure fit.
    • Powder-coated die-cast aluminum oval handle for strength.
    • Standard O size seat washer.
    • Adjustable polycarbonate wall flange.
    • No-lead solder.
    • Brass construction.
    • 8 in. wall thickness plus the 1 1/4 in. inlet = 9 1/4 in. from the back of the faucet.
    Green checkmark of qualityEvery item checked for quality
    $70.00 $38.50

  • FitRite 21 in. x 15 in. Backflow Valve Cover

    The FitRite Insulated Backflow/RP Cover ensures you’re ready for the cold weather. 21 in. in length, the 2-1/4 in. in width and 15 in. in height is spacious enough to cover your valve and secure it there for the Winter. The valve cover is a sleek black and is for use as an irrigation system accessory.

    • Backflow valve cover.
    • Irrigation system accessory.
    • 21 in. length, 2-1/4 in. width, 15 in. height.
    • Black color.
    • Easy installation, installs in seconds.
    • Extends your watering season.
    • Fits most backflow assemblies.
    • Durable weatherproof material, UV and cold resistant.
    • Allows backflow devices to function properly.
    • Made for virtually all brands of PVB’s and RP’s.
    Green checkmark of qualityEvery item checked for quality
    $27.47 $15.11

  • #5, BrassCraft 1/2 in. FIP Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve

    Gain control of your household plumbing fixtures with this BrassCraft 1/2 in. FIP Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve. Stop the water flow with the 90 degree water handle design and you can perform maintenance and repair without shutting off the water to the entire home. he straight valve is most often used where the water pipe enters the room from the floor.

    • Compatible with iron pipe.
    • Smooth on/off flow control with a quarter turn (90°) turn of the handle.
    • Smooth on/off flow control with a quarter turn (90°) turn of the handle.
    • Easy to install.
    • 1-piece body construction for strength, durability and long-lasting performance.
    • Chrome-plated brass.
    • Temperature rating: 40° to 160°F.
    • Pressure rating: 125 psi maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112,18,1/CSA B125,1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. I.D. (3/8 in. O.D.).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • #26, BrassCraft 1/2 in. Compression Inlet x 3/8 in. Compression Outlet Straight Valve

    BrassCraft 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet 1/4 in. Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

    • Compatible with copper or PEX (PEX installations require a stainless steel tube insert).
    • Smooth, quarter-turn operation, ON/OFF flow control with a 90° turn of the handle.
    • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • 1-piece body construction for strength, durability and long-lasting performance.
    • Chrome-plated brass.
    • Temperature rating: 40°F to 160°F.
    • Pressure rating: 125 psi maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (60,500 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • Apollo 1 in. x 1 in. x 1/2 in. Brass PEX-A Expansion Barb Reducing Tee

    The Apollo ExpansionPEX 1 in. x 1 in. x 1/2 in. Brass PEX-A Barb Reducing Tee is simple to install. Apollo ExpansionPEX barb fittings are a key component to one of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo ExpansionPEX couplings must be secured into place with Apollo ExpansionPEX sleeves or comparable expansion-type sleeve or ring (all sold separately). The Apollo ExpansionPEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

    • Individually bagged.
    • Larger internal diameter of Apollo ExpansionPEX fittings results in a 25% greater flow rate within the system.
    • Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength.
    • Cold-expansion tool (sold separately) is required for installation.
    • Meets or exceeds ASTM F1960 standard.
    • Meets UPC, IPC and cUPC standard.
    • Barb x Barb x Barb connection for PEX-A plumbing systems.
    • NSF listed.
    • Rated to 200 degree F and 200 psi.
    • Item is not compatible with PEXb pipe, crimp-style (ASTM 1807) or pinch clamp (ASTM F2098) piping systems.
    Green checkmark of qualityEvery item checked for quality
    $14.27 $7.85

  • 2-Piece Pack: NIBCO 3/4 in. x 3/4 in. CPVC-CTS 90-Degree Slip x Slip Elbow Fitting

    2-Piece Pack! Model/Part #C470734. Suited for hot and cold water pressure distribution systems, this 90° slip x slip elbow features female socket connections and is used to easily change the direction of flow. Chlorinated Polyvinyl Chloride (CPVC) has proven to be an excellent material for hot corrosive liquids, hot and cold water distribution, and similar applications above the temperature range of PVC. CPVC will not rust, pit, scale or corrode. CPVC fittings are easy to install and are joined by solvent cementing or threading.

    Green checkmark of qualityEvery item checked for quality
    $1.82 $1.00
X