Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
    2. Page 6

Category: Plumbing

Showing 46–52 of 52 results

Filters

  • Cash Acme 3/8 in. Compression HG-135 Thermostatic Mixing Valve with Compression Tee

    The HG135 is a sleek and compact point of use mixing valve designed to assist in the prevention of scalding. It features a superior, fast acting thermostatic element that provides stable operation at flow rates as low as 0.25 gm (0.95 pm). The Heatguard 135 also reduces the outlet flow to a trickle in the event of a cold water supply failure. The valve inlets and outlet connections are standard 3/8″ supply line compression connections for use with 3/8 in. OD tube. The inlets of the valve feature check valves to prevent cross contamination as well as serviceable strainer screens to prevent the valve from being clogged with dirt or debris. Each valve includes a purpose built mounting bracket and hardware to neatly and securely fasten the valve to the wall. The compact design and pleasant aesthetics allow for this valve to easily be fit under or behind a single basin. Adjustable outlet temperature range: 100°-120°F (38°-49°C).

    • Intended for point of use/under sink installations to provide safe outlet water temperature.
    • Ideal for individual faucets and electronic faucets.
    • ASSE 1070 approved.
    • Listed by ASSE, CSA, IAPMO.
    • Accurate temperature control with flows as low as 0.25 gpm.
    • Robust, low complexity design and total flow shut-off if cold supply fails.
    Green checkmark of qualityEvery item checked for quality
    $78.40 $43.12

  • #26, BrassCraft 1/2 in. Compression Inlet x 3/8 in. Compression Outlet Straight Valve

    BrassCraft 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet 1/4 in. Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

    • Compatible with copper or PEX (PEX installations require a stainless steel tube insert).
    • Smooth, quarter-turn operation, ON/OFF flow control with a 90° turn of the handle.
    • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • 1-piece body construction for strength, durability and long-lasting performance.
    • Chrome-plated brass.
    • Temperature rating: 40°F to 160°F.
    • Pressure rating: 125 psi maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • Apollo 3/4 In. X 3/4 In. Pvc Schedule 40 Slip X Slip Ball Valve Pro Pack (12-Pack)

    PVC Sch. 40 Ball Valves are compact and lightweight. This Slip x Slip valve is designed for a variety of applications including pressure distribution of cold water in irrigation, pool, spa, agricultural, commercial and light industrial applications and comes in a plastic jar of 12 valves which is convenient, resealable, and reusable. The ball valves are NSF approved and have EPDM seats and O-rings integrated into the durable PVC body.

    • PVC schedule 40 construction for durability.
    • Full port design allows for maximum efficiency and minimal turbulence or pressure reduction.
    • Quarter-turn flow control for easy on and off.
    • NSF / ANSI standard 372 certified.
    • Slip connections conform to ASTM D2467.
    • Working temperature range: 41°F to 122°F (5°C to 55°C).
    • Maximum pressure rating 150 psi at 73°F (22°C).
    • Requires solvent cement for installation (not included).
    • Please note – as temperature increases, working pressure decreases, the optimal working pressure for PVC valves is 150 psi at 73°F (22°C) if the temperature increases above 73°F (22°C), use the PVC. correction factor to determine working pressure, multiply the maximum working pressure by the correction factor, please see correction factor grid on the attached specification sheet.
    Green checkmark of qualityEvery item checked for quality
    $18.18 $10.00

  • #2, STRM005CR, Chrome Single Lever Pull-Down Kitchen Faucet

    • Model: Star Mini Pull-Out Kitchen Mixer – STRM005CR.
    • Function: Single Lever Pull-Down Kitchen Mixer/Faucet.
    • Configuration: Single-Hole Installation.
    • Finish: Chrome.
    • Brand: Modern National.
    • Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
    • Installation Instructions are Included.
    Green checkmark of qualityEvery item checked for quality
    $100.00 $55.00

  • Apollo 3/4 in. Brass PEX-B Barb x 3/4 in. Male Pipe Thread Adapter (5-Pack)

    The ApolloPEX 3/4 in. Brass PEX Barb x 3/4 in. Male Pipe Thread Adapter is simple to install. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX adapters can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

    • Most economical piping system available.
    • Meets UPC, IPC and cUPC standard.
    • Can secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves.
    • NSF listed.
    • Barb x MIP connection for PEX plumbing systems.
    • Maximum working pressure of 200 psi and maximum temperature of 200 degree F.
    Green checkmark of qualityEvery item checked for quality
    $16.45 $9.05

  • Pfister S60-151A 2-3/4 in. Zinc Die-Cast Crown Imperial Shower Flange with Sleeve in Chrome

    Flanges provides a decorative way to cover the stems of a faucet. S60-151A Crown Imperial Shower Flange is for use with new style Pfister shower valves. 2-piece design for easier installation.

    • 2-3/4 in. O.D.
    • Chrome finish.
    • Includes set screw.
    • Tube and flange design.
    • Genuine Pfister replacement part.
    • Internal threads to mount to stem.
    Green checkmark of qualityEvery item checked for quality
    $35.42 $19.48

  • Split Basin Faucet with Drain Stopper in Matte Black

    This KES bathroom sink faucet is NSF and cUPC certified, compliant with no-lead requirements and California (CEC) Standards. In addition, this KES matte black bathroom faucet is made with no-lead 18/8 stainless steel for safe drinking water. Water safety is our priority! This bathroom faucet also features a high-quality finish passing a rigorous salt spray test for superior corrosion resistance, rustproof and scratch resistance.

    Green checkmark of qualityEvery item checked for quality
    $136.36 $75.00
X