Showing 1–9 of 52 results
-
SharkBite 1/2 in. Brass Push-to-Connect Dishwasher Installation Kit
$36.36 $20.00The SharkBite Dishwasher Installation Kit has everything you need to install your new dishwasher, it’s fast and simple. Push-to-Connect fittings require no glue, soldering, unions or tools. The kit includes 1 SharkBite 1/2 in. Dual Outlet Angle Stop Valve, 1 SharkBite 1/4 in. x 3/4 in. MPT Elbow, 1 SharkBite 1/4 in. x 3/4 in. GHT Elbow, 1 SharkBite 1/4 in. Stop Valve Adapter, 10 ft. coil of 1/4 in. PEX Pipe, 2 Disconnect Clips (1/2 in. and 1/4 in.). The SharkBite Dual Outlet Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up behind the dishwasher.
- Lead free DZR brass construction for durability and reliability.
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes.
- Innovative push-to-connect design makes for quick and easy installation.
- Push-to-connect fittings require no solder, glue, unions, or tools.
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces.
- Designed for potable water distribution as well as hydronic heating applications.
- Corrosion resistant to improve longevity.
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels.
- Meets all UPC, IPC and cUPC requirements.
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility.
- Rated to 200°F and 200 psi.
- Rated to 200°F and 200 psi.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Advanced Drainage Systems 4 in. Singlewall External Snap Coupler
$4.73 $2.60Advanced Drainage Systems, Inc. (ADS) 4″ Single Wall External Coupler is the contractor’s choice for connecting two sections of 4″ single wall pipe. The coupler snaps over the ends of each section easily for a secure connection. Made of HDPE the 4″ external coupler is designed to last the life of the drainage system.
Every item checked for quality -
HOME-FLEX 1/2 in. CSST x 1/2 in. FIPT Brass Female Adapter
$10.13 $5.57The HOME-FLEX Female Adapter allows you to quickly affix a CSST system to a gas source. Used to attach CSST directly to Steel Pipe. Can attach CSST either the beginning or end of a CSST system.
- Very high quality brass construction.
- 1/2 in. diameter.
- For use with HOME-FLEX CSST systems.
- For use with natural gas or liquid propane.
- CSA and IAPMO certified.
- Not for use with Home Flex UNDERGROUND poly tubing.
- HOME-FLEX Corrugated Stainless Steel Tubing (CSST) flexible gas piping material must be installed by a qualified installer who has been certified in the use of the HOME-FLEX gas piping system.
- Some areas of the United States do not allow installation of CSST for fuel gas piping systems. It is the installer’s responsibility to check and understand all codes governing the location of installation prior to installing HOME-FLEX CSST.
- CSST is generally for indoor use; however, it can be used outdoors and/or underground with very specific parameters.
Every item checked for quality -
BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve, #73
$5.45 $3.00
BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.
- Compatible with PEX, copper and CPVC.
- Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
- Installation ready: requires no special tools, soldering or glue for a watertight seal.
- 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
- Pre-inserted tube stiffener is “installation ready” for a faster connection.
- Easy-to-remove handle protects against accidental operation during rough-ins.
- Chrome-plated brass.
- Temperature rating: 40° to 160°F.
- Pressure rating: 125 psi maximum.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality -
FORIOUS Matte Black Bathroom Faucet – Single Handle, 1-Hole, 6-inch
$90.91 $50.00The upper opening gives you a clear view of the flow of water in a stylish way, giving you a wonderful view of the waterfall, relax, pleasant mood. Single handle bathroom faucets design help users adjust to your preferred flow of water and the temperature easily, suitable for all kinds of bathroom styles. Lead-free brass bathroom faucet body ensures health and quality. Ceramic valve core has passed 500,000 non-leakage cycle tests, with double-layer encrypted leak-proof hose. Stability and reliability is the biggest significance of faucet. Flow Rate: 1.2 Gallons Per Minute. Multi-layer sprayed matte black bathroom faucet surface has passed 100% Acid Salt Spray Testing, non-corrosion, non-rust, anti-scratch. The classic matte black faucet makes your bathroom more elegant and solemn.
Every item checked for quality -
Wilkins 3/4 in. Lead Free Brass NPT Pressure Relief Valve
$37.40 $20.57The P1000AXL-150C Pressure Relief Valve is set at 150 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.
- Eliminates risk of over-pressure of storage tanks.
- Epoxy-coating adds extra protection.
- Pressure relief valve set at 150 psi.
- CSA Compliance to ANSI Z21.22/CSA 4.4.
- Certified to ASME Section IV by National Board.
- Pressure relief valve settings of 30, 75, 125, and 150 psi offer versatility.
Every item checked for quality -
Apollo 1 in. x 1 in. x 1/2 in. Brass PEX-A Expansion Barb Reducing Tee
$14.27 $7.85The Apollo ExpansionPEX 1 in. x 1 in. x 1/2 in. Brass PEX-A Barb Reducing Tee is simple to install. Apollo ExpansionPEX barb fittings are a key component to one of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo ExpansionPEX couplings must be secured into place with Apollo ExpansionPEX sleeves or comparable expansion-type sleeve or ring (all sold separately). The Apollo ExpansionPEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Individually bagged.
- Larger internal diameter of Apollo ExpansionPEX fittings results in a 25% greater flow rate within the system.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength.
- Cold-expansion tool (sold separately) is required for installation.
- Meets or exceeds ASTM F1960 standard.
- Meets UPC, IPC and cUPC standard.
- Barb x Barb x Barb connection for PEX-A plumbing systems.
- NSF listed.
- Rated to 200 degree F and 200 psi.
- Item is not compatible with PEXb pipe, crimp-style (ASTM 1807) or pinch clamp (ASTM F2098) piping systems.
Every item checked for quality -
Swiss Madison 0.8/1.28 GPF Wall Mount Dual Flush Actuator Push Button Plate in White
$22.87 $12.58Wall Mount Actuator Flush Push Button Plate in White. This Actuator plate fits with All Swiss Madison Concealed Wall Carriers for use with our wall hung toilets. It features 2 buttons for dual flush compatibility and is very easy to clean.
- Easy to use.
- Plate clips off for easy access to the inner tank and to speedy valve.
- Simple to clean.
- Installation is a snap.
- Easy to clean.
- Actuator plate compatible with Swiss Madison dual flush systems.
Every item checked for quality
