The SharkBite Dishwasher Installation Kit has everything you need to install your new dishwasher, it’s fast and simple. Push-to-Connect fittings require no glue, soldering, unions or tools. The kit includes 1 SharkBite 1/2 in. Dual Outlet Angle Stop Valve, 1 SharkBite 1/4 in. x 3/4 in. MPT Elbow, 1 SharkBite 1/4 in. x 3/4 in. GHT Elbow, 1 SharkBite 1/4 in. Stop Valve Adapter, 10 ft. coil of 1/4 in. PEX Pipe, 2 Disconnect Clips (1/2 in. and 1/4 in.). The SharkBite Dual Outlet Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up behind the dishwasher.
Lead free DZR brass construction for durability and reliability.
Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes.
Innovative push-to-connect design makes for quick and easy installation.
Push-to-connect fittings require no solder, glue, unions, or tools.
Fitting can be rotated on pipe after installation making it easier to work in tight spaces.
Designed for potable water distribution as well as hydronic heating applications.
Corrosion resistant to improve longevity.
Certified as a manufactured joint and for underground and behind-the-wall applications without access panels.
Meets all UPC, IPC and cUPC requirements.
Demount clip allows user to release the fitting from the pipe for convenient installation flexibility.
BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.
Compatible with PEX, copper and CPVC.
Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
Installation ready: requires no special tools, soldering or glue for a watertight seal.
1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
Pre-inserted tube stiffener is “installation ready” for a faster connection.
Easy-to-remove handle protects against accidental operation during rough-ins.
Chrome-plated brass.
Temperature rating: 40° to 160°F.
Pressure rating: 125 psi maximum.
No-lead certified.
IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Corrugated stainless steel with corrosion resistant coating.
1/4 in. ID (3/8 in. OD).
Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
Safety+Plus2 TEFV valve helps protect against fires and explosions.
Valve has no parts that can break or misalign over time for 24/7 protection.
Connector and valve are 100% leak tested.
No special tools required for installation.
ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
Approved for indoor and outdoor use.
Temperature rating: -20°F to 150°F.
Pressure rating: 1/2 psi maximum.
ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
SharkBite ProLock fittings are a versatile and innovative full-flow plumbing system utilizing push lock fitting technology and engineered specifically for use with SharkBite PE-RT and PEX pipe. The SharkBite 1 in. Push-to-Connect 90° Elbow intuitive design makes for one of the simplest and most dependable fittings on the market. No tools are required to make a connection. They use a collet with stainless steel teeth that grips the pipe when fully inserted, and an EPDM O-Ring to provide a permanent, leak-proof seal. The Twist-to-lock technology ensures maximum security. When twisted into place with indicator arrows aligned, the locking cap locks the pipe in place and creates an audible click. Removing a SharkBite fitting is just as easy with no tools needed; simply twist the cap turn counterclockwise to unlock then depress collet against the fitting to remove the pipe. ProLock fittings are suitable for hot and cold potable water and hydronic heating applications. They have been specifically designed for the Professional Plumber. Code approved for behind-the-wall installations.