Related products

• 

  

  HOME-FLEX 3/4 in. IPS DR 11 Underground Yellow Poly Gas Pipe 90-Degree Elbow

  The HOME-FLEX Underground Elbow allows you to safely and easily make a 90 turn. Simply cut the pipe, slide in the provided stiffener and slide into the fitting and tighten down. No special tools necessary.

  • HOME-FLEX Underground compression fitting for IPS size MDPE Yellow Poly Gas Pipe. Includes stiffeners.
  • Purpose-built for direct burial outside underground use only.
  • HOME-FLEX Underground pipe and fittings should NEVER be used in a building and should NEVER be used under a foundation with a structure on it.
  • No special tools or equipment required to fit to compatible sized yellow poly gas pipe.
  • Easy to understand, straight-forward installation.
  • IAPMO UPC certified to ASTM F1924.
  • Constructed of durable polypropylene for years of service.
  • Rated at 125 psi.
  • Can be removed and re-installed.
  • NOT for use with HOME-FLEX (or other) CSST (corrugated stainless steel tubing) products.

  Every item checked for quality

  $27.27 $15.00

  

  
• 

  

  Everbilt 30/50 Low Pressure Switch For Well Pumps

  This pressure switch signals the pump to start when the water system drops to 30 PSI (factory set) and stops at 50 PSI (factory set). This switch is to be used with submersible well or jet pumps. It can be wired 115-Volt or 230-Volt. This switch must be used in conjunction with a well pressure tank. The air pressure in the well tank, when empty of all water, must be set to 28 PSI, or the switch will not operate properly. This switch is equipped with a low-level cut-off arm that automatically shuts off a well pump when there is a dramatic decrease in pressure, such as a leak in the discharge pipes or a faulty pressure tank.

  • Turns pump on at 30 psi, off at 50 psi.
  • Cap removes for easy adjustment.
  • Can be wired 115-Volt or 230-Volt.
  • For use with submersible well or jet pumps.
  • Motor wires are connected to the 2 middle posts (color does not matter).
  • Breaker box wires are connected to 2 outside posts (color does not matter).
  • 2-spring design allows for adjustment of cut-in and cut-out pressure settings.
  • Adjustments to springs should only be made by users with good knowledge of well systems.
  • Switch shuts off pump automatically when there is a dramatic decrease in pressure.

  Every item checked for quality

  $30.82 $16.95

  

  
• 

  

  BrassCraft Safety+PLUS2 Thermal Excess Flow valve (36,800 BTU) 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector

  BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

  • Corrugated stainless steel with corrosion resistant coating.
  • 1/4 in. ID (3/8 in. OD).
  • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
  • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
  • Safety+Plus2 TEFV valve helps protect against fires and explosions.
  • Valve has no parts that can break or misalign over time for 24/7 protection.
  • Connector and valve are 100% leak tested.
  • No special tools required for installation.
  • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
  • Approved for indoor and outdoor use.
  • Temperature rating: -20°F to 150°F.
  • Pressure rating: 1/2 psi maximum.
  • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
  • Designed, machined and assembled in the USA.

  Every item checked for quality

  $27.27 $15.00

  

  
• 

  

  BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve, #73

  

  BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.

  • Compatible with PEX, copper and CPVC.
  • Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
  • Installation ready: requires no special tools, soldering or glue for a watertight seal.
  • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
  • Pre-inserted tube stiffener is “installation ready” for a faster connection.
  • Easy-to-remove handle protects against accidental operation during rough-ins.
  • Chrome-plated brass.
  • Temperature rating: 40° to 160°F.
  • Pressure rating: 125 psi maximum.
  • No-lead certified.
  • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.

  Every item checked for quality

  $5.45 $3.00