The SharkBite Faucet Installation Kit has everything you need to install your new faucet. The kit includes 2 SharkBite 1/2 in. x 1/4 in. (3/8 in. O.D.) Push-to-Connect Angle Stop Valves, two 5 ft. coils of 1/4 in. PEX Pipe, two 1/4 in. (3/8 in. O.D.) SharkBite x 1/2 in. Swivel Faucet Connectors, and a 1/2 in. Chrome Trim Cover reversed functions as a disconnect and 1/4 in. disconnect clip to remove the pipe from the fitting if needed. The SharkBite Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up under the sink providing a clean, tangle free look. Once the stop valves are installed, thread the 1/2 in. faucet connectors onto the faucet connections and then measure and cut the PEX and push into the outlet on the stop valve and the faucet connector and the installation is complete.
BrassCraft has created an easy-to-install, one-piece connection. By combining our trusted bass supply stops with our dependable braided, vinyl and stainless steel connector – the results is a quick and easy installation. One-piece connectors are available in a wide variety of options for faucet, toilet and dishwasher applications.
Connector is constructed with flexible braided polymer; stop is chrome plated brass.
1/2 in. nominal push connect x 1/2 in. FIP.
No special installation tools required.
Use in hot or cold water applications.
Durable, flexible water connector requires no cutting or soldering during installation.
Compatible with copper, PEX, and CPVC.
Remove with combination removal tool or 5/8 in. open end wrench.
Connector bends freely without kinking or crimping in tight quarters.
No-lead certified.
IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.
Compatible with PEX, copper and CPVC.
Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
Installation ready: requires no special tools, soldering or glue for a watertight seal.
1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
Pre-inserted tube stiffener is “installation ready” for a faster connection.
Easy-to-remove handle protects against accidental operation during rough-ins.
Chrome-plated brass.
Temperature rating: 40° to 160°F.
Pressure rating: 125 psi maximum.
No-lead certified.
IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.