PVC Sch. 40 Ball Valves are compact and lightweight. This Slip x Slip valve is designed for a variety of applications including pressure distribution of cold water in irrigation, pool, spa, agricultural, commercial and light industrial applications and comes in a plastic jar of 12 valves which is convenient, resealable, and reusable. The ball valves are NSF approved and have EPDM seats and O-rings integrated into the durable PVC body.
PVC schedule 40 construction for durability.
Full port design allows for maximum efficiency and minimal turbulence or pressure reduction.
Quarter-turn flow control for easy on and off.
NSF / ANSI standard 372 certified.
Slip connections conform to ASTM D2467.
Working temperature range: 41°F to 122°F (5°C to 55°C).
Maximum pressure rating 150 psi at 73°F (22°C).
Requires solvent cement for installation (not included).
Please note – as temperature increases, working pressure decreases, the optimal working pressure for PVC valves is 150 psi at 73°F (22°C) if the temperature increases above 73°F (22°C), use the PVC. correction factor to determine working pressure, multiply the maximum working pressure by the correction factor, please see correction factor grid on the attached specification sheet.
Advanced Drainage Systems, Inc. (ADS) 4″ Single Wall External Coupler is the contractor’s choice for connecting two sections of 4″ single wall pipe. The coupler snaps over the ends of each section easily for a secure connection. Made of HDPE the 4″ external coupler is designed to last the life of the drainage system.
The FitRite Insulated Backflow/RP Cover ensures you’re ready for the cold weather. 21 in. in length, the 2-1/4 in. in width and 15 in. in height is spacious enough to cover your valve and secure it there for the Winter. The valve cover is a sleek black and is for use as an irrigation system accessory.
Backflow valve cover.
Irrigation system accessory.
21 in. length, 2-1/4 in. width, 15 in. height.
Black color.
Easy installation, installs in seconds.
Extends your watering season.
Fits most backflow assemblies.
Durable weatherproof material, UV and cold resistant.
BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.
Compatible with PEX, copper and CPVC.
Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
Installation ready: requires no special tools, soldering or glue for a watertight seal.
1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
Pre-inserted tube stiffener is “installation ready” for a faster connection.
Easy-to-remove handle protects against accidental operation during rough-ins.
Chrome-plated brass.
Temperature rating: 40° to 160°F.
Pressure rating: 125 psi maximum.
No-lead certified.
IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.