BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.
Compatible with PEX, copper and CPVC.
Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
Installation ready: requires no special tools, soldering or glue for a watertight seal.
1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
Pre-inserted tube stiffener is “installation ready” for a faster connection.
Easy-to-remove handle protects against accidental operation during rough-ins.
Chrome-plated brass.
Temperature rating: 40° to 160°F.
Pressure rating: 125 psi maximum.
No-lead certified.
IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
The Apollo ExpansionPEX 1 in. x 1 in. x 1/2 in. Brass PEX-A Barb Reducing Tee is simple to install. Apollo ExpansionPEX barb fittings are a key component to one of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo ExpansionPEX couplings must be secured into place with Apollo ExpansionPEX sleeves or comparable expansion-type sleeve or ring (all sold separately). The Apollo ExpansionPEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
Individually bagged.
Larger internal diameter of Apollo ExpansionPEX fittings results in a 25% greater flow rate within the system.
Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength.
Cold-expansion tool (sold separately) is required for installation.
Meets or exceeds ASTM F1960 standard.
Meets UPC, IPC and cUPC standard.
Barb x Barb x Barb connection for PEX-A plumbing systems.
NSF listed.
Rated to 200 degree F and 200 psi.
Item is not compatible with PEXb pipe, crimp-style (ASTM 1807) or pinch clamp (ASTM F2098) piping systems.
PVC Sch. 40 Ball Valves are compact and lightweight. This Slip x Slip valve is designed for a variety of applications including pressure distribution of cold water in irrigation, pool, spa, agricultural, commercial and light industrial applications and comes in a plastic jar of 12 valves which is convenient, resealable, and reusable. The ball valves are NSF approved and have EPDM seats and O-rings integrated into the durable PVC body.
PVC schedule 40 construction for durability.
Full port design allows for maximum efficiency and minimal turbulence or pressure reduction.
Quarter-turn flow control for easy on and off.
NSF / ANSI standard 372 certified.
Slip connections conform to ASTM D2467.
Working temperature range: 41°F to 122°F (5°C to 55°C).
Maximum pressure rating 150 psi at 73°F (22°C).
Requires solvent cement for installation (not included).
Please note – as temperature increases, working pressure decreases, the optimal working pressure for PVC valves is 150 psi at 73°F (22°C) if the temperature increases above 73°F (22°C), use the PVC. correction factor to determine working pressure, multiply the maximum working pressure by the correction factor, please see correction factor grid on the attached specification sheet.
This pressure switch signals the pump to start when the water system drops to 30 PSI (factory set) and stops at 50 PSI (factory set). This switch is to be used with submersible well or jet pumps. It can be wired 115-Volt or 230-Volt. This switch must be used in conjunction with a well pressure tank. The air pressure in the well tank, when empty of all water, must be set to 28 PSI, or the switch will not operate properly. This switch is equipped with a low-level cut-off arm that automatically shuts off a well pump when there is a dramatic decrease in pressure, such as a leak in the discharge pipes or a faulty pressure tank.
Turns pump on at 30 psi, off at 50 psi.
Cap removes for easy adjustment.
Can be wired 115-Volt or 230-Volt.
For use with submersible well or jet pumps.
Motor wires are connected to the 2 middle posts (color does not matter).
Breaker box wires are connected to 2 outside posts (color does not matter).
2-spring design allows for adjustment of cut-in and cut-out pressure settings.
Adjustments to springs should only be made by users with good knowledge of well systems.
Switch shuts off pump automatically when there is a dramatic decrease in pressure.