BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Corrugated stainless steel with corrosion resistant coating.
1/4 in. I.D. (3/8 in. O.D.).
Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
Safety+Plus2 TEFV valve helps protect against fires and explosions.
Valve has no parts that can break or misalign over time for 24/7 protection.
Connector and valve are 100% leak tested.
No special tools required for installation.
ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
Approved for indoor and outdoor use.
Temperature rating: -20°F to 150°F.
Pressure rating: 1/2 psi maximum.
ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
The HOME-FLEX Female Adapter allows you to quickly affix a CSST system to a gas source. Used to attach CSST directly to Steel Pipe. Can attach CSST either the beginning or end of a CSST system.
Very high quality brass construction.
1/2 in. diameter.
For use with HOME-FLEX CSST systems.
For use with natural gas or liquid propane.
CSA and IAPMO certified.
Not for use with Home Flex UNDERGROUND poly tubing.
HOME-FLEX Corrugated Stainless Steel Tubing (CSST) flexible gas piping material must be installed by a qualified installer who has been certified in the use of the HOME-FLEX gas piping system.
Some areas of the United States do not allow installation of CSST for fuel gas piping systems. It is the installer’s responsibility to check and understand all codes governing the location of installation prior to installing HOME-FLEX CSST.
CSST is generally for indoor use; however, it can be used outdoors and/or underground with very specific parameters.
BrassCraft’s push connect one-piece water supply combines their trusted brass water valve with their flexible braided polymer connector for one quick easy-to-install solution. BrassCraft’s one-piece connection features push connect technology on the valve inlet and a hand-tighten wing nut on the outlet to provide a significant savings in installation time and cost. Push connect valve inlet requires no special tools to install and comes equipped with a pre-inserted tube stiffener to make the product ideal for copper, PEX and CPVC piping systems. The braided polymer fibers of the connector are designed to bend freely without kinking or crimping in tight quarters and resist corrosion caused by chemicals found in common household, tile and glass cleaners. In addition, its reinforced inner hose resists corrosion under harsh water conditions.
1-piece unit combines valve and supply line.
Saves time with one less connection.
No special installation tools required.
Installation ready with pre-inserted tube stiffener.
Fast, reliable and secure.
Compatible with copper, PEX and CPVC.
Remove with combination removal tool or 5/8 in. open end wrench.
Connector bends freely without kinking or crimping in tight quarters.
No-lead certified.
IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
BrassCraft 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet 1/4 in. Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.
Compatible with copper or PEX (PEX installations require a stainless steel tube insert).
Smooth, quarter-turn operation, ON/OFF flow control with a 90° turn of the handle.
1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
Easy-to-remove handle protects against accidental operation during rough-ins.
1-piece body construction for strength, durability and long-lasting performance.
Chrome-plated brass.
Temperature rating: 40°F to 160°F.
Pressure rating: 125 psi maximum.
No-lead certified.
IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.